Download Chloride LPBP610-2 Specifications

Safety Precautions
!
WA R N I N G
Do not install the equipment where you may need an
extension cord. Use of an extension cord that does
not meet the power specifications introduces a risk of
overheating that could lead to a fire.
!
WA R N I N G
Do not disassemble, repair, or alter the server, except
as described in the Stratus ftServer V 200 and V 400
Systems: Operation and Maintenance Guide (R557)
or the Stratus ftServer V 100 Systems: Operation and
Maintenance Guide (R581). There is a risk of an
electric shock or fire as well as equipment
malfunction if you do not observe the instructions in
the Stratus ftServer V 200 and V 400 Systems:
Operation and Maintenance Guide (R557) or the
Stratus ftServer V 100 Systems: Operation and
Maintenance Guide (R581).
!
WA R N I N G
To avoid fire, electric shock, and equipment
breakdown, prevent water or foreign objects from
getting into the equipment. Do not let water or foreign
objects, such as pins or paper clips, enter the
equipment.
!
WA R N I N G
To prevent fire or current leakage, do not plug the
power cord into a nonconforming outlet. Use a power
outlet with appropriate voltage and power type, as
specified in this guide.
!
WA R N I N G
Disconnect the power cords from the server or power
source before you install or relocate the equipment.
All voltage is removed only when the power cords are
disconnected.
1-14
Stratus ftServer V 100, V 200, and V 400 Systems: Site Planning Guide (R543)