Download Security Command XRSuper6 User`s guide

Silencing an Alarm
When the alarm bell or siren is sounding, enter your user code or present your
card to a keypad or reader during the Status List display.
All/Perimeter or Home/Sleep/Away System
CANCEL
VERIFY displays.
• If a burglar alarm is valid, press VERIFY to send a verification message
to the Central Station.
• If a valid alarm has not occurred, press CANCEL to cancel the alarm
and send an Abort or Cancel message to the Central Station. The
keypad displays ALARM CANCELLED and the security system will be
disarmed.
What to do when a trouble tone is sounding
You can silence the trouble tone by pressing any key. This only silences the
keypad and does not correct the condition that originally caused the problem.
© 2008 Digital Monitoring Products, Inc.
Information furnished by DMP is believed to be accurate and reliable.
This information is subject to change without notice.
The XRSuper6 panel is UL listed for Standard Line Security Household Service and Commercial Burglary Service.