Download HP Rp7410 - Server - 0 MB RAM Technical data

Managing nPartitions
Restoring a Complex Profile
Restoring a Complex Profile
You can restore a previous Complex Profile configuration, which
effectively allows you to undo your last nPartition configuration change.
Restoring the previous Complex Profile allows you to revert to the
previous complex configuration—including the nPartition
configurations—that existed before you made your last change.
Because restoring a prior Complex Profile requires shutting down all
nPartitions to an inactive ready for reconfig state, you should use this
procedure only when absolutely necessary.
NOTE
Restoring a Complex Profile [Service Processor]
This procedure (Command menu, CC command, L option) restores the
prior complex configuration that existed before you made your last
nPartition configuration change.
Step 1. Ensure that all nPartitions within the server complex are inactive at the
ready for reconfig state.
You can put each nPartition into the ready for reconfig state by using the
shutdown -R -H command, the BCH interface’s RECONFIGRESET
command, or using the service processor Command menu’s RR command.
Step 2. Login to the server complex’s service processor, and enter CM to access the
Command menu.
Login as a user with administrator privileges, which are required for
restoring the previous complex profile configuration.
Step 3. Issue the CC command, select Last Complex Profile (L), and confirm that
you want to modify the Complex Profile configuration.
GSP:CM> CC
This command allows you to change the complex profile.
WARNING: You must either shut down the OSs for reconfiguration or
execute the RR (reset for reconfiguration) command for all
partitions before executing this command.
HP System Partitions Guide: Administration for nPartitions, rev 5.1
303