Download Agilent Technologies 6051A Operating instructions

Query Syntax
*SRE?
Returned Parameters
<NR1>
Suffix
None
Related Commands
*PSC
*STB?
Value: 0 to 255
Read Status Byte Query
Type
Description
Device Status
This query reads the Status Byte register. Note that the MSS (Master Summary Status) bit
and not the RQS bit is returned in Bit 6. This bit indicates whether or not the electronic
load has at least one reason for requesting service. *STB? does not clear the Status Byte
register, which is cleared only when subsequent action has cleared all its set bits. Refer to
Chapter 5 - Status Reporting for more information about this register.
Bit Position
Condition
Bit Weight
Parameters
Returned Parameters
<NR1>
None
Related Commands
None
Status Byte Register
5
4
3
2
ESB
MAV
QUES CSUM
32
16
8
4
1
Always zero.
1
0
2
1
0
0
1
1
Value: 0 to 255
Immediate Trigger Command
Type
Description
Command Syntax
Parameters
Related Commands
38
6
MSS
64
None
Suffix
*TRG
7
OPER
128
Device Trigger
This command which is essentially the same as the Group Execute Trigger (<GET>),
generates a trigger to the electronic load only if TRIG:SOUR is set to BUS (refer to the
TRIGger Subsystem Root commands).
*TRG
None
<GET>
Language Dictionary
TRIG:SOUR