Download Sharp AR-FX5 Specifications

!
"#$%&
[7] MACHINE OPERATION
1. Key operator program
Set value(Default)
KEY OPERATOR PROGRAM
Engine section LCD
Operation Default display setting
settings
Fax
default
settings
Condition setting screen*/ Address directory (ABC)/
Address directory (Group)
The number of direct address keys
displayed setting
6/8*/12
Must input next address key at broadcast setting
omit*/not omit
Initial resolution setting
standard*/fine/fine(half tone)/super fine/
super fine(half tone)/ultra fine/ ultra fine(half tone)
Default verification stamp *1
Enable/Disable*
Own number and name set
Dial mode setting
tone*/10PPS/20PPS
Auto wake up print
Enable*/ Disable
Pause time setting
1,2* ~ 15sec
Speaker volume setting
Speaker
Low/Medium*/High
Ringer volume
Low/Medium*/High /Off
Line monitor
Low/Medium*/High /Off
Original print on send error report
Enable*/ Disable
Remote reception number setting
00 ~ 55* ~ 99
Transaction report print select setting
Single sending
Print out all report/Print out error report only*/
No printed report
Broadcasting
Print out all report*/Print out error report only/
No printed report
Receiving
Print out all report/Print out error report only/
No printed report*
Confidential reception Print out notice page*/Not print out notice page
Activity report print select setting
ECM*2
Fax send
settings
Fax
receive
settings
Auto print
at memory full
Yes/No*
Print daily
at designated time
Yes/No*
Enable/ Disable*
Distinctive ring detection
Enable/ Disable*
Auto reduction sending setting
Enable*/ Disable
Rotation sending setting
Enable*/ Disable
Printing page number at receiver
Enable*/ Disable
Call timer at memory sending
20/45*/60sec
Date/own number print position setting
Outside the original image*/Inside the original image
Recall in case of line busy
Enable*/ Disable
Recall in case of communication error
Enable*/ Disable
Times of recall setting in case of line busy
1,2* ~ 15
Interval of recall setting
1 ~ 3* ~ 15min
Quick on line sending
Enable*/ Disable
Auto receive reduce setting
Enable*/ Disable
Number of calls in auto reception
0 ~ 2* ~ 15
Duplex reception setting*3
Enable/ Disable*
Print style setting
Print actual size cut off disable/
Print actual size cut off enable/Auto size select*
Set the telephone number for data forwarding
Fax separator page
Enable*/ Disable
Output tray setting*4
Fax polling Polling security setting
security
Passcode number setting
Allowed/Not allowed*
Set number of times public box may be polled
*1
*2
*3
*4
Automatically clear*/Not clear
Can only be selected if the optional verification stamp unit is installed.
This setting is only effective if the other machine is a G3 machine that supports ECM.
Only when the duplex module is installed.
The trays that can be selected will vary depending on what peripheral devices have been installed.
AR-FX5 MACHINE OPERATION 7-1
Remark