Download Siemens S45 Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
2.3.6.5
AT+CGCLASS
AT+CGCLASS
GPRS mobile station class
Test command
Response
AT+CGCLASS=?
+CGCLASS: (list of supported <class>s)
OK/ERROR/+CME ERROR
Parameter
<class>
B
C
CG
CC
string parameter for the GPRS mobile class
class B
class C in GPRS and circuit switched alternate
mode
class C in GPRS only mode
class C in circuit switched only mode (lowest)
Read command
Response
AT+CGCLASS?
+CGCLASS: <class>
OK/ERROR/+CME ERROR
Parameter
<n>
Write command
See Test command
Parameter
AT+CGCLASS=[<class>] <class>
See Test command
Response
OK/ERROR/+CME ERROR
2.3.6.6
AT+CGDATA
AT+CGDATA
Enter data state
Test command
Response
AT+CGDATA=?
+CGDATA: (list of supported <L2P>s)
OK/ERROR/+CME ERROR
Parameter
layer 2 protocol to be used between the TE
<L2P>
and MT PPP
Write command
AT+CGDATA=[<L2P> ,[<cid> [,<cid> [,…]]]]
Parameter
<L2P>
<cid>
See Test command
numeric PDP Context Identifier
Response
CONNECT/ERROR/+CME ERROR
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision:
1.8
Revision Date:
30. November, 2001
48