Download Sharp R-301F User guide

72
Operation When Wi-Fi Is Connected
Enabling/Disabling Auto-IP Setting
Connecting with Wi-Fi Direct Device to
Exchange Data
In Wi-Fi setting window,
device
In Wi-Fi setting window,
Advanced
auto-IP
setting
Wi-Fi Direct
Tap a
Invitation is accepted on the device
・Tap auto-IP setting to enable (
)/disable (
)
setting.
・Setting is available when Wi-Fi is ON.
・Setting is available when Wi-Fi is OFF.
・When auto-IP setting is enabled and if correct IP address
Enable/Disable Network Notification
is not assigned, fixed IP address is given. In this case,
In Wi-Fi setting window,
connection is limited is shown.
Internet connection is not available and message that
Advanced
Network notification
・Setting is available when Wi-Fi is ON.
・Tap Network notification to enable (
)/disable (
)
setting.
Setting Wi-Fi Connection When Display Turns
Off
In Wi-Fi setting window,
sleep policy
Advanced
Wi-Fi
Tap an item
Enable/Disable Wi-Fi Non-Connection for
Unstable Connection
In Wi-Fi setting window,
Advanced
Avoid
poor connections
・Tap Avoid poor connections to enable (
(
)/disable
) setting.
Specifying Frequency Band
In Wi-Fi setting window,
frequency band
Advanced
Wi-Fi
Tap an item
Saving Battery When Wi-Fi Is ON
In Wi-Fi setting window,
Advanced
Wi-Fi
optimization
・Tap Wi-Fi optimization to enable (
)/disable (
)
setting.
・This function saves Battery, however, Wi-Fi connection
trouble may occur. In such case, check reception of access
points in Wi-Fi settings and try to connect.
Checking MAC Address
In Wi-Fi setting window,
Advanced
・MAC address is shown below MAC address.
Checking IP Address
In Wi-Fi setting window,
Advanced
・IP address is shown below IP address.