1
Download Ricon M052 Service manual
Transcript
System SP5-xxx CE Call Performs the CE Call at the start or end of the service. 002 [0 or 1 / 0 / 1 /step] 0: Start of the service 1: End of the service NOTE: This SP is activated only when SP 5816-001 is set to "2". Function Flag Enables or disables the remote service function. 003 [0 to 1 / 0 / 1 /step] 0: Disabled, 1: Enabled NOTE: This SP setting is changed to "1" after @Remote registor has been completed. SSL Disable Uses or does not use the RCG certification by SSL when calling the RCG. 007 [0 to 1 / 0 / 1 /step] 0: Uses the RCG certification System Maintenance Reference 1: Does no use the RCG certification RCG Connect Timeout 008 Specifies the connect timeout interval when calling the RCG. [1 to 90 / 30 / 1 second /step] RCG Write Timeout 009 Specifies the write timeout interval when calling the RCG. [1 to 100 / 60 / 1 second /step] RCG Read Timeout 010 Specifies the read timeout interval when calling the RCG. [1 to 100 / 60 / 1 second /step] SM 5-57 M052/M053/M054
