Download SEH INTERCON User manual

User’s Manual InterCon-PrintServer
Network Menu
Choose the „Interface - Option“ menu. Press „FORMFEED“. This
should allows the user to access the Novell NetWare menu.
Novell NetWare
In order to switch the Novell protocol on or
off, the user must press „ENTER“ button
and then either the „+“ or „ - “ button. In
order to confirm the input „ENTER“ button
must be pressed. Via the „Form Feed“
button the user can access the Novell submenu where the Novell Frame Header can be chosen (for control instructions see how to switch
Novell protocols on and off).
Opt. Status Page
Opt. Status page:
OFF / ON:
Save Configuration:
ENTER
Button „ + “ and „ - “
ENTER
Next Option:
Button „ + “
TCP/IP Protocol:
OFF / ON:
Save Configuration:
ENTER
Button „ + “ and „ - “
ENTER
TCP/IP Sub-menu:
Button „Form Feed“
TCP/IP Protocol
Whenever the TCP/IP protocol is switched off, all other „active“ TCP/IP protocols (BOOTP,
DHCP, RARP) are also automatically switch off.
111