Download SEH INTERCON User manual

User’s Manual InterCon-PrintServer
6.3.4 Adding the Print Server to the Windows Print Manager
6.4 Changing the Print Server Configuration
7 Installation in UNIX Networks
7.1 Functional Overview
7.2 How to install the Print Server to UNIX Networks
7.3 Allocation of the IP Address
7.3.1 Updating the /etc/hosts File
7.3.2 Updating the Internal ARP System Table
7.3.3 Boot Protocol BOOTP
7.3.4 Boot Protocol RARP
7.4 Changing the Print Server Configuration
7.5 Changing an existing IP Address
7.6 Printing without the UNIX Spooler System
7.7 Installation as a Remote Printer (LPD)
7.7.1 IBM AIX (Version 3.x)
7.7.2 IBM AIX (Version 4.x)
7.7.3 AIX (without SMIT)
7.7.4 HP-UX
7.7.5 SunOS
7.7.6 SCO UNIX (Version 3.2)
7.7.7 UnixWare (Version 4.2 - 1.1.2)
7.7.8 System V (General)
7.8 Installation as a Network Printer (TCP-Ports)
7.9 SINIX SPOOL V4.x
7.10 Installation as a Local Printer (FTP)
7.10.1 Print Server Directories
7.10.2 Description of the Printer Interfaces
7.10.3 System V Print Spooler lpsched
7.10.4 BSD Print Spooler lpd
7.10.5 AIX Print Spooler qdaemon
8 Apple
8.1 Functional Overview
8.2 Installation
8.3 Name and Zone Setting
9 BS2000 (TCP/IP) Installation
10 Appendix
10.1 General Parameters
10.2 Status Button
57
59
61
62
64
65
66
66
67
68
70
71
72
73
74
75
76
77
78
79
80
81
82
82
84
84
85
87
90
93
95
96
97
97
99
101
101
105
10.2.1 Default Setting / Download Mode
10.2.2 Printing a Status Page
105
106
10.3 Kyocera Print Server (IC53, IC60, IC73)
107
10.3.1 Configuration via Printer Panel
10.3.2 Parameters
107
109
10.4 Kyocera Print Server (IC59, IC69, IC79)
110
10.4.1 Configuration via Printer Panel
10.4.2 Configuration via Prescribe Commands
110
112
10.5 Administration Software
10.6 Pocket Print Server (IC55)
10.7 Epson Print Server (IC57, IC77)
10.8 Shellscript
113
114
114
115
3