Download Agilent Technologies EXG User`s guide

Basic Operation
Working with Files
File Softkeys
For details on each key, use key help as described on page 44.
Note: Available file types depend on the installed options.
Instrument operating parameters (see page 68).
Display internal or USB
files, depending on the
selected storage media.
Sweep data from the List Mode Values table editor.
User flatness calibration corrections.
page 63
Displays IQ Files
Deletions require
confirmation.
Displays FSK
Files
Displays FIR
Files
Displays a list of
Pulse Train files.
Displays Bit
Files
page 72
page 379
Available only with USB connected
(i.e. Without external USB connected,
softkeys are greyed out).
The signal generator does not
format USB media or change file
permissions. Use a computer to
perform these operations.
Shows the current directory
The display indicates when the current directory is the default storage path.
For information on setting the default storage path, see page 72.
This key changes, depending on
the selected file. See page 66.
page 67
Available only when the
current directory is not the
top level directory.
Requires
confirmation
page 67
When you connect USB media to the instrument, the signal generator displays the USB Media menu and the message External USB Storage attached. When you
disconnect the USB media, the message External USB Storage detached displays. When you open the External Media menu without USB media connected, the
signal generator displays the message External Media Not Detected.
62
Agilent X-Series Signal Generators User’s Guide