Download RAD Data comm IPmux-24 Specifications

Chapter 6 Diagnostics and Troubleshooting
Installation and Operation Manual
Displaying Ethernet Statistics
You can display statistic data for the network and user Ethernet ports.
³
To view the Ethernet statistics:
1. From the Statistics menu, select Bridge.
The Bridge screen appears (see Figure 6-3).
2. From the Bridge screen, type F to toggle between network and user
interfaces. Table 6-2 describes the LAN statistics data.
3. Type C to reset the port counters.
4. Type A to reset counters of all IPmux-24 Ethernet ports.
Monitoring>Statistics>Bridge
Channel
>
Frames Received
Total Frames:
Total Octets:
Oversize Frames
Fragments:
Jabber:
Dropped Frames:
CRC Errors:
(User1-Eth2)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
Frames Transmitted
Correct Frames:
(0)
Correct Octets:
(0)
Collisions:
(0)
>
F - forward; C - clear counters; A - clear ALL port counters
ESC-prev.menu; !-main menu; &-exit
1 Mngr/s
Figure 6-3. Ethernet Statistics
Table 6-2. Ethernet Statistics Parameters
Parameter
Description
Frames Received
Total Frames
The total number of correct frames received. When a valid connection is established the
number should increase steadily.
Total Octets
The total number of octets (bytes) received. When a valid connection is established the
number should increase steadily.
Oversize
Frames
Number of frames exceeding the maximum allowed frame size, but are otherwise valid
Ethernet frames (good CRC).
Fragments
The number of frames that are shorter than 64 bytes and have an invalid CRC.
6-6
Monitoring Performance
IPmux-24 Ver. 1.5