Download Code Alarm F65 Technical data

If during operation the red led B comes on, the activation value of the lifting
moment limiting device has been reached.
CONTROLS TO
OPERATE THE CRANE
GR2_45»65_3_4_SE
Any hidden danger situation for persons must be audibly alarmed by pressing
the push button E.
When there are serious, imminent and dangerous conditions for persons and
things during load handling, operate on the STOP button, which isolates all
crane functions.
Display on the control panel
When the electric feeding has been activated (after the version’s number of the
software) the pressure in the inner, outer ram and the jib and the percentage
of load on the winch are displayed.
In relation to the view chosen like standard, when you start the radio remote
control the pressure values are displayed in:
- ”bar” if on the display, on the left of the values, no symbol is present.
- ”daPsi” if on the display, on the left of the values, the symbol is present.
*
- By pushing the button
the percentage values of pressure in the inner,
outer ram and the jib and the percentage of load on the winch are displayed.
By pushing a second time the button
the pressure values in the inner,
outer and jib rams movement in the measurement unit non standard and the
percentage of load on the winch are displayed.
By pushing again the button
you return to the initial display.
- For the use of the control button
see Par. 22.2.
- By pushing the button
one or more times you return to the initial display
(view of the pressure values).
- For the meaning of other messages see Par. 16.7.1 “Diagnostic”
16.3