1
Download Compaq HSZ80 Technical data
Transcript
5–70 Event Reporting: Templates and Codes Table 5–3 Last Failure Codes (Continued) Code Description 03290100 The required Event Information Packet (EIP) or Device Work Descriptor (DWD) were not supplied to the Device Services error logging code. 032B0100 A Device Work Descriptor (DWD) was supplied with a NULL Physical Unit Block (PUB) pointer. 03320101 An invalid code was passed to the error recovery thread in the error_stat field of the PCB. ■ 03330188 Last Failure Parameter[0] contains the PCB error_stat code. A parity error was detected by a device port while sending data out onto the SCSI bus. ■ Last Failure Parameter [0] contains the PCB port_ptr value. ■ Last Failure Parameter [1] contains the PCB copy of the device port TEMP register. ■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register. ■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register. ■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register. ■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register. ■ Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/SSTAT1/ SSTAT0/DSTAT registers. ■ Last Failure Parameter [7] contains the PCB copies of the device port LCRC/RESERVED/ ISTAT/DFIFO registers.
