Download RELM RMU800A Specifications

RMU800A SERVICE MANUAL
8
D Key Assignment
D Code
DTMF
DKey D-Code
Pause1-16s
DTMF
DKeyPause
1
DTMF
DkeyPause 16
9
DTMF Side Tone
10
Auto Dial
11
Auto Dial
Programming
12
Manual Dial
13
14
Keypad Auto Tx
END
Side Tone Off
DTM F
SideTone Off
Side Tone On
DTM F
SideTone On
Auto Dial Off
AutoDial Off
Auto Dial On
AutoDial On
AutoDialP Off
AutoDP Off
AutoDialP On
AutoDP On
Manual Dial Off
ManuDial Off
Manual Dial On
ManuDial On
Auto Tx Off
KeyAutoTxOff
Not sent DTMF when only DTMF keys
are pressed.
Auto Tx On
KeyAutoTx On
Sent DTMF by pressing a DTMF
Keypad key
END
END
Hold [PTT], then dial
Display “END” indicating the end of
menu option
Notes:
1)
2)
3)
If a transmission starts with the "*" or "#" tone, the radio compares the tone duration with the set
"First Digit Time", and adapts the longer time of the two to the first "*" or "#" tone.
DTMF Transmit Delay Time sets the delay time from the starting of transmission to the sending of
the first DTMF digit. Making this value longer has a similar effect as setting the First Digit Time
longer. When using DTMF and CTCSS/CDCSS it is recommended to set this parameter to 100 ms
or more.
If automatic DTMF encode function (PTT ID, Auto Dial, Store & Send and Dial ID) is used for DTMF
Call, DTMF Speed must be set 6, 8 or 10 digits per second.
－ 48 －