Download Extron electronics MPS 112 Operating instructions

Quick Start — MPS Series
Installation
See chapter 2 for details.
Mounting Screws (2 Plcs)
Each Side
Step 1
Turn off power to the MPS switcher and all other
devices that will be connected.
Optional Furniture Mounting Bracket
2
S 11
MP
O)
DE
OU
(VI
OG
T PR
OU
T
4
3
Step 2
2
(S-
or
Select your mounting option and install the
appropriate brackets. Mount the switcher.
#8 Screw (4 Plcs)
Each Side
T
-23
DIO
AU
1
IN
R
3
2
RS
1
4
2
A
VG
TT
OU
OU
3
EO
VID
Extron
MPS 112
4
1
2
T
OU
4
3
MAX
2
0.5A
1
O
IDE
S-V
Media Presentation
Switcher
0 Hz
50/6
Supplied Rack Mounting Bracket
Attach up to four VGA, four S-video, and four
Video (composite) input devices (up to four of
each type) to the MPS switcher.
OU
4
3
C
MI
V
-240
100
Step 3
1
)
EO
VID
2
T L
OU
A)
(VG
Mounting options
Step 4
Connect a VGA output, an S-video output, and a
Video (composite) output from the switcher to a
projector’s inputs.
Microphone
Extron
MPS 112CS
Media Presentation
Switcher
Step 5
MP
O)
DE
S 11
G
OUT PRO
L
(VI
2
OUT
R
4
Speakers
3
For stereo input, connect up to 12 audio sources
to the audio inputs of the VGA, S-video, or Video
(composite) groups (up to four audio sources for
each group). See chapter two, “Installation”, for
wiring diagrams.
2
1
)
EO
VID
(S-
OUT
4
3
2
OUT L
A)
(VG
232
RS-
M
NTO
3 PHA ER
POW IN
MIC
DIO
AU
1
R
1
4
2
A
VG
3
1
EO
VID
OUT
OUT
4
Amplifier
2
OUT
4
3
MAX
2
0.0A
40V
100-2
1
O
IDE
S-V
Hz
50/60
Computer (2)
Step 6
Projector
For stereo audio output, connect an audio output
device to each of the three output groups and one
audio amplifier to the Program Audio output
connectors. See chapter two, “Installation”, for
wiring diagrams.
If the MPS switcher is to be connected to a
computer or host controller for remote control,
connect the host’s RS-232 cable to the 9-pin
female RS-232 remote connector of the switcher.
For more information, see the “Remote Control
Port (RS-232)” section in chapter five.
1
9
6
Female
VCR (4)
Connecting the MPS switcher
Step 7
5
DVD (4)
Laptop (2)
1
6
5
9
Male
RS-232 remote connector
Step 8
Power up the input and output devices, then
connect power to the switcher’s rear AC
connector.
Pin
RS-232 function
Description
1
2
3
4
5
6, 7
8, 9
–
Tx
Rx
–
Gnd
–
–
No connection
Transmit data
Receive data
No connection
Signal ground
No connection
No connection
RS-232 remote connector pinout table