Download VOKERA Syntesi e Technical data

INTRODUCTION
The Syntesi e appliance is a high-efficiency combination
boiler with outputs to heating & DHW.
The appliance – by design – incorporates electronic
ignition, circulating pump, expansion vessel, safety valve,
pressure gauge, and automatic by-pass.
This appliance is not suitable for use with LPG.
The Syntesi e is produced as room sealed, category
I2H appliances, suitable for internal wall mounting
applications only. It is provided with a fan powered flue
outlet with an annular co-axial combustion air intake that
can be rotated – horizontally – through 360 degrees for
various horizontal or vertical applications. The Syntesi e
appliance can also be used with the Vokera twin flue
system.
The Syntesi e appliance is approved for use with C12 &
C32 type flue applications.
This appliance is designed for use with a sealed system
only; consequently they are not intended for use on open
vented systems.
Fig.1 General Layout
26
27 28
34
29
33
30
31
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Safety Valve
Pressure Switch
Diverter Valve Motor
Domestic Heat Exchanger
Pump
Automatic Air Release Valve
Main Burner
Electrode
Main Heat Exchanger
Latent Heat Collector
Condense Sensor
Flue Gas Analysis Test Point
Flue Outlet
Air Intake
Differential Analog Pressure Switch
Silicone Tube
Fan Assembly
Combustion Chamber
Burner Temperature Control
Expansion Vessel
Transformer
Gas Valve
Modulator Coil
Condense Trap
Domestic Hot Water Flow Switch
26
27
28
29
30
31
32
33
34
Hot Water Temperature Control
Mode Selector Switch
Status LED
Temperature Indicator
DHW Request LED
Central Heating Temperature Control
Combustion Switch
Timeclock Aperture (optional)
Pressure Gauge
32
Fig. 1
e
1