Download ProCurve 420 System information

Command Line Reference
SNMP Commands
show snmpv3
This command displays the SNMP v3 users, trap targets, filter assignments
and settings.
Command Mode
Exec
Example
HP420#show snmpv3
EngineId
:00:00:00:0b:00:00:00:30:f1:81:83:12
EngineBoots:4
SNMP Users
=============================================
UserName
:chris
GroupName
:RWPriv
AuthType
:MD5
Passphrase:****************
PrivType
:DES
Passphrase:****************
--------------------------------------------=============================================
SNMP Filters
=============================================
Filter: trapfilter1
Type: exclude
Subtree: iso.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.20
Mask: None
--------------------------------------------=============================================
SNMP Filter Assignment
=============================================
HostID
FilterID
--------------------------------------------mytraps
trapfilter1
=============================================
SNMP Targets
=============================================
Host ID
: mytraps
User
: chris
IP Address
: 192.168.1.10
UDP Port
: 162
--------------------------------------------=============================================
HP420#HP420#
8-52