Download RAD Data comm 146 User`s manual

Chapter 4 Port Configuration and Monitoring
5620 Model Descriptor for LA-110 User’s Manual
Figure 4-12. AAL1 Stream Interface Parameters
2. Fill in the fields, as described in Table 4-7.
3. Click <Save> to save the changes.
If the data rate was changed, a confirmation message dialog appears:
“Data Rate change requires device reset. Operation will RESET the Device.
Do You Wish to Continue?” Click <Yes> to confirm.
Table 4-7. AAL1 Stream Interface Parameters
Parameter
Remarks
Port
The selected port
Read-only
Type
The protocol application which runs above the physical port.
AAL1 Stream
Read-only
Physical
Interface
The port interface type.
X.21, V.35, V.36
Read-only
Data Rate (kbps)
The operation rate of the port in kbps.
64, 128, 256...2048 Kbps (in intervals of 64 kbps)
4-16
Data Port Configuration