1
Download Agilent Technologies 2000 X-Series Technical data
Transcript
27 :SYSTem Commands :SYSTem:TIME (see page 790) Command Syntax :SYSTem:TIME <time> <time> ::= hours,minutes,seconds in NR1 format The :SYSTem:TIME command sets the system time, using a 24- hour format. Commas are used as separators. Validity checking is performed to ensure that the time is valid. Query Syntax :SYSTem:TIME? <time> The :SYSTem:TIME? query returns the current system time. Return Format <time><NL> <time> ::= hours,minutes,seconds in NR1 format See Also • "Introduction to :SYSTem Commands" on page 564 • ":SYSTem:DATE" on page 565 576 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
