1
Download Agilent Technologies 2000 X-Series Technical data
Transcript
:SBUS<n> Commands
25
:SBUS<n>:SPI:BITorder
(see page 790)
Command Syntax
:SBUS<n>:SPI:BITorder <order>
<order> ::= {LSBFirst | MSBFirst}
The :SBUS<n>:SPI:BITorder command selects the bit order, most significant
bit first (MSB) or least significant bit first (LSB), used when displaying
data in the serial decode waveform and in the Lister.
Query Syntax
:SBUS<n>:SPI:BITorder?
The :SBUS<n>:SPI:BITorder? query returns the current SPI decode bit
order.
Return Format
<order><NL>
<order> ::= {LSBF | MSBF}
Errors
See Also
• "- 241, Hardware missing" on page 753
• "Introduction to :SBUS<n> Commands" on page 447
• ":SBUS<n>:MODE" on page 451
• ":SBUS<n>:SPI Commands" on page 493
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
495
