Download AMCC 3WARE 9590SE Install guide

Chapter 2. Installing the Battery Backup Unit
2
Position the BBU control module above the controller and align
the BBU control module and the controller, making sure to:
„
Mate the connector on the BBU control module with the
receptacle on the controller.
„
Match the plastic post on the BBU with the hole on the
controller.
Figure 16. BBU control module ready to connect to the
controller
3
Press down gently until the BBU is seated.
Figure 17. BBU control module connected to the controller
24
3ware 9590SE Serial ATA RAID Controller Quick Install Guide