Download Urbano Progresso Operating instructions
Transcript
Do not disassemble, remodel, or repair the equipment. Doing so might cause rupture, ignition, fire, or overheating, electric shock or injury. Remodeling cell phones violates the Radio Law. For repairs of fault etc., contact au shop or Secure cell phone support center. The Company is not liable even in the event of any nonconformities arising on the URBANO PROGRESSO or peripheral devices as a result of modification, etc. Do not short-circuit the connection jack. Do not contact/put conductive materials (metal pieces, pencil lead, etc.) with/into the connection jack. Doing so might cause rupture, ignition, overheating or electric shock. Do not use if there is smoke, abnormal odor or noise, excessive overheating, or other abnormalities. If an abnormality occurs, disconnect the specified charger (sold separately) from the power outlet or cigarette lighter if you are charging the battery, make sure that the product is not overheating before turning the power off, and contact an au shop or Customer Service Center. Continued use of the product in this state might cause rupture, ignition, fire or overheating. WARNING Be sure to read the following warnings before use. Do not let your hands, fingers and other parts of the body touch the connection jack during power distribution. Doing so might cause electric shock or injury. Never charge the battery if the URBANO PROGRESSO main unit is wet. Doing so might cause electric shock or short-circuit resulting in a fault or fire. Faults caused by charging when the product is wet with water are not covered by the warranty and the repair cannot be accepted. Although this product model has waterproof property, stop use if liquid such as water gets inside the URBANO PROGRESSO main unit from the external connection jack cover or the battery cover. Continued use of the product in this state might cause overheating, fire or a fault. Do not leave in places within the reach of small children. Failure to do so might cause injury, etc. if they accidentally swallow the parts, battery pack, etc. and choke on it. Do not store the product in places subject to direct sunlight (e.g. in automobiles), places that get extremely cold, and in humid or dusty places. Doing so might cause ignition or fire. CAUTION Be sure to read the following cautions before use. Wearing the product in a pocket of clothes etc. might cause low temperature burn depending on state of contact with body or surrounding environment. Try not to contact with your body or put in a pocket for a long time especially under the environment of letting the product get warm such as near the heating equipment (kotatsu, heater, electric blanket), under the hot sun or while charging the battery. The product may get warm and it might cause low temperature burn such as red on skin or itching depending on your constitution or physical condition. Safety Precautions Do not drop from a height or subject to strong impact, such as throwing or stomping. Doing so might cause rupture, ignition, fire, overheating or leakage. If you have dropped or damaged the product, do not continue to use it in that state, and contact an au shop or Secure cell phone support center. Do not leave on unstable places such as rocky stands or tilting surfaces. The product may fall and it might cause injury. Especially when the vibrator is set on the product, the product might be dropped by the vibration. Do not touch the main unit, battery pack or specified charger (sold separately) for a long time while power is being supplied from an external source. Doing so might cause low temperature burn. Do not place near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause loss of internal data by a fault. Do not fold, bend or place a heavy object on the micro au IC-Card. Doing so may cause a fault. Do not touch the IC (metal) part of the micro au IC-Card or short-circuit it. Doing so might cause loss of data or a fault. 7