Download USER``S MANUAL

3. Attach the Seat Handlebar (5) to the Seat
Carriage (24) with four M8 x 40mm Screws (86);
start all four Screws, and then tighten them.
3
86
See the inset drawing. Plug the wire on
the Seat Handlebar (5) fully into the Pulse
Receptacle (64) on the left side of the exercise
bike.
5
86
24
64
5
4. Orient the Backrest Frame (17) as shown. Insert
the Backrest Frame into the Seat Carriage (24),
below the Seat Handlebar (5).
4
88
87
24
Attach the Backrest Frame (17) with an M8 x
30mm Screw (87) and an M8 x 20mm Screw
(88); start both Screws, and then tighten
them.
5
17
7