Download USER``S MANUAL

8. Orient the Upright (4) and the Upright Sleeve
(37) as shown. Slide the Upright Sleeve onto the
Upright.
8
4
Have another person hold the Upright (4) and
the Upright Sleeve (37) near the front of the
Frame (1) as shown.
Wire Tie
Tie the lower end of the wire tie in the Upright (4)
to the Main Wire Harness (58) and to the Pulse
Wire (64) in the Frame (1).
37
58
Wire Tie
64
See the inset drawing. Pull the other end of the
wire tie until the Main Wire Harness (58) and the
Pulse Wire (64) are routed through the Upright
(4) and out of the indicated hole.
1
Hole
4
64
58
Wire Tie
9. Tip: Avoid pinching the wires.
9
Slide the Upright (4) onto the Frame (1). Attach
the Upright with five M10 x 25mm Screws (74);
start all five Screws, and then tighten them.
4
37
Avoid pinching
the wires
Then, slide the Upright Sleeve (37) downward
and press it onto the Right and Left Shields
(10, 11).
74
74
10, 11
1
9