Download Axis Q1932-E Installation guide

INSTALLATION GUIDE
AXIS Q1931-E Thermal Network Camera
AXIS Q1932-E Thermal Network Camera
About this Document
This document includes instructions for installing AXIS Q1931-E
Thermal Network Camera and AXIS Q1932-E Thermal Network
Camera on your network. Previous experience of networking will
be beneficial when installing the product.
Legal Considerations
Video and audio surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local region
before using this product for surveillance purposes. This product
includes one (1) H.264 decoder license and one (1) AAC decoder
license. To purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not be
liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance or
use of this material. This product is only to be used for its
intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of the
patents listed at http://www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
This product contains licensed third-party software. See the
menu item “About” in the product’s user interface for more
information.
This product contains source code copyright Apple Computer,
Inc., under the terms of Apple Public Source License 2.0 (see
www.opensource.apple.com/apsl). The source code is
available from developer.apple.com/darwin/projects/bonjour/
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no user-serviceable
components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory
certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are
registered trademarks or trademark applications of Axis AB in
various jurisdictions. All other company names and products are
trademarks or registered trademarks of their respective
companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer, Linux,
Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows,
Windows Vista and WWW are registered trademarks of the
respective holders. Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Oracle and/or its
affiliates. UPnPTM is a certification mark of the UPnPTM
Implementers Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks of
SD-3C, LLC in the United States, other countries or both. Also,
miniSD, microSD, miniSDHC, microSDHC, microSDXC are all
trademarks or registered trademarks of SD-3C, LLC in the United
States, other countries or both.
Regulatory Information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
• Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC).
• Low Voltage (LVD) Directive 2006/95/EC. See Safety.
• Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling.
A copy of the original declaration of conformity may be obtained
from Axis Communications AB. See Contact Information.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
• Radio frequency emission when installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used in its
intended environment.
USA
AXIS Q1931-E: This equipment has been tested using a
shielded network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
AXIS Q1932-E: The product shall be connected using a
shielded network cable (STP) that is properly grounded.
This equipment has been tested using a shielded network
cable (STP) and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense. The
product shall be connected using a shielded network cable
(STP) that is properly grounded.
Canada
AXIS Q1931-E: This Class B digital apparatus complies with
Canadian ICES-003. The product shall be connected using a
shielded network cable (STP) that is properly grounded.
Cet appareil numérique de la classe B est confome à la norme
NMB-003 du Canada. Le produit doit être connecté à l'aide
d'un câble réseau blindé (STP) qui est correctement mis à la
terre.
AXIS Q1932-E: This Class A digital apparatus complies with
Canadian ICES-003. The product shall be connected using a
shielded network cable (STP) that is properly grounded.
Cet appareil numérique de la classe A est confome à la
norme NMB-003 du Canada. Le produit doit être connecté
à l'aide d'un câble réseau blindé (STP) qui est correctement
mis à la terre
Europe
AXIS Q1931-E: This digital equipment fulfills the
requirements for RF emission according to the Class B limit
of EN 55022. The product shall be connected using a shielded
network cable (STP) that is properly grounded.
This product fulfills the requirements for emissions and
immunity according to EN 50121-4 and IEC 62236-4 railway
applications.
This product fulfills the requirements for immunity according to
EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to
EN 55024 residential and commercial environments.
AXIS Q1932-E: This digital equipment fulfills the
requirements for RF emission according to the Class A limit
of EN 55022. The product shall be connected using a shielded
network cable (STP) that is properly grounded. Notice! This is
a Class A product. In a domestic environment this product
may cause RF interference, in which case the user may be
required to take adequate measures.
Australia/New Zealand
AXIS Q1931-E: This digital equipment fulfills the
requirements for RF emission according to the Class B limit
of AS/NZS CISPR 22. The product shall be connected using a
shielded network cable (STP) that is properly grounded
AXIS Q1932-E: This digital equipment fulfills the
requirements for RF emission according to the Class A limit
of AS/NZS CISPR 22. The product shall be connected using a
shielded network cable (STP) that is properly grounded.
Notice! This is a Class A product. In a domestic environment
this product may cause RF interference, in which case the
user may be required to take adequate measures. .
AXIS Q1932-E:
Korea - 이 기기는 업무용(A급) 전자파적합기기로서
판매자 또는 사용자는 이 점을 주의하시기 바라며,
가정외의 지역에서 사용하는 것을 목적으로 합니다.
적절히 접지된 STP (shielded twisted pair) 케이블을
사용하여 제품을 연결 하십시오.
Safety
This product complies with IEC/EN 60950-1 and IEC/EN
60950-22, Safety of Information Technology Equipment. The
product shall be grounded either through a shielded network
cable (STP) or other appropriate method.
The power supply used with this product shall fulfill the
requirements for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS) according to IEC/EN 60950-1.
Disposal and Recycling
When this product has reached the end of its useful life, dispose
of it according to local raws and regulations. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. In accordance
with local legislation, penalties may be applicable for incorrect
disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the
European Union member states. To prevent potential
harm to human health and the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For information about your nearest designated
collection point, contact your local authority responsible for
waste disposal. Businesses should contact the product supplier
for information about how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
China
AXIS Q1931-E:
Japan - この装置は、クラスB 情報技術装置です。
This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).
この装置 は、家庭環境で使用することを目的として
います が、この装置がラジオやテレビジョン受信機
に近 接して使用されると、受信障害を引き起こすこ
と があります。取扱説明書に従って正しい取り扱い
をして下さい。本製品は、シールドネットワーク
ケーブル(STP)を使用して接続してください。また
適切に接地してください。
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
AXIS Q1932-E:
Japan - この装置は、クラスA 情報技術装置です。この装置を
家庭環境で使用すると電波妨害を引き起こすことがあります。
この場合には使用者が適切な対策を講ずるよう要求される
ことがあります。本製品は、
シールドネットワークケーブル
(STP)を使用して接続してください。
また適切に接地して
ください。
AXIS Q1931-E:
Korea - ࢇ̛̛Еɼࢽࡈ%̗ࢷ࢕ળࢶଢ̛̛Ի۰
࣯Իɼࢽ߾۰‫ࡈی‬ଜЕʨࡶּࢶࡳԻଜֲֻҘ
एࠇ߾۰‫ࡈی‬ଟܹ࢑‫ݡ‬ТЬࢶࢸ஢ࢻएѹ673
VKLHOGHGWZLVWHGSDLUৼࢇ‫ࡈیࡶٴ‬ଜࠆࢿ૽
ࡶࠉʼଜ‫ࠝݤݫ‬
Contact Information
Support
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database.
Search by product, category, or phrase
• report problems to Axis support staff by logging in to your
private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Should you require any technical assistance, please contact
appropriate channels according to your AVHS license
agreement to ensure a rapid response.
Learn More!
Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.
English
Français
Safeguards
Mesures de sécurité
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or heavy
pressure. Do not install the product on unstable brackets,
unstable or vibrating surfaces or walls, since this could cause
damage to the product.
• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use
a damp cloth for cleaning.
• Use only accessories that comply with technical specification
of the product. These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis
or your Axis reseller for service matters.
• Conservez le produit Axis dans un environnement sec et aéré.
• Évitez d'exposer le produit Axis aux vibrations, aux chocs ou à
une forte pression. N'installez pas le produit sur un support
instable, ou des surfaces ou des murs instables ou vibrants, car
cela pourrait l'endommager.
• N'utilisez que les outils applicables pour installer le produit
Axis ; une force excessive pourrait endommager le produit.
• Pour le nettoyage, n’utilisez ni produits chimiques, ni
substances caustiques ou aérosols. Utilisez un chiffon humide
pour le nettoyage.
• N’utilisez que des accessoires conformes aux caractéristiques
techniques du produit. Ceux-ci peuvent être fournis par Axis
ou par un fournisseur tiers.
• Utilisez uniquement des pièces de rechange fournies ou
recommandées par Axis.
• Ne tentez pas de réparer le produit vous-même, contactez Axis
ou votre revendeur Axis pour toute réparation.
Please read through this Installation Guide carefully before
installing the Axis product. Keep the Installation Guide for
further reference.
• This Axis product shall be used in compliance with local laws
and regulations.
• The product shall be connected using a shielded network cable
(STP). All cables connecting the product to the network switch
shall be shielded (STP) and intended for their specific use.
Make sure that the network switch is properly grounded. See
Electromagnetic Compatibility (EMC) on page 2 for regulatory
requirements.
Transportation
• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.
Lisez attentivement le présent Guide d'installation avant
d'installer le produit Axis. Conservez le Guide d'installation pour
une utilisation ultérieure.
• Ce produit Axis doit être utilisé conformément aux lois et
réglementations locales en vigueur.
• Le produit doit être connecté à l'aide d'un câble réseau blindé
(STP). Tous les câbles de raccordement du produit au
commutateur réseau doivent être blindés (STP) et destinés à
leur usage spécifique. Assurez-vous que le commutateur
réseau est correctement mis à la terre. Voir la compatibilité
électromagnétique (CEM) sur la page 2 pour les exigences
réglementaires.
Transport
Battery Replacement
This Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under normal
conditions this battery will last for a minimum of 5 years. Low
battery power affects the operation of the RTC, causing it to
reset at every power-up. A log message will appear when the
battery needs replacing. The battery should not be replaced
unless required!
If the battery does need replacing, please contact
www.axis.com/techsup for assistance.
• Dispose of used batteries according to the manufacturer's
instructions.
• Risk of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as
recommended by the manufacturer.
• Pour transporter le produit Axis et éviter de l'endommager,
utilisez l'emballage d'origine ou un emballage équivalent.
Remplacement des piles
Ce produit Axis nécessite une pile au lithium CR2032 de 3,0 V
pour l'alimentation de son horloge en temps réel interne. Dans
des conditions normales d'utilisation, cette pile est censée durer
au moins 5 ans. Si la pile est faible, le fonctionnement de
l'horloge en temps réel peut être affecté et entraîner sa
réinitialisation à chaque mise sous tension. Un message
enregistré apparaît lorsque la pile doit être remplacée. Ne
remplacez la pile qu'en cas de nécessité !
Si la pile doit être remplacée, veuillez contacter
www.axis.com/techsup pour obtenir de l’aide.
Jetez les piles usagées conformément aux consignes du
fabricant.
• Le remplacement incorrect de la pile peut entraîner un risque
d'explosion.
• Remplacez la pile par une pile identique ou équivalente
uniquement, en respectant les recommandations du fabricant.
Deutsch
Italiano
Sicherheitsvorkehrungen
Sicurezza
Bitte lesen Sie diese Installationsanleitung sorgfältig durch,
bevor Sie mit der Installation des Axis Produkts beginnen. Halten
Sie die Installationsanleitung bereit, falls Sie darauf
zurückgreifen müssen.
• Lagern Sie das Axis-Produkt in einer trockenen und belüfteten
Umgebung.
• Setzen Sie das Axis Produkt keinen Vibrationen,
Erschütterungen oder starkem Druck aus. Installieren Sie das
Produkt nicht an instabilen Halterungen oder instabilen oder
vibrierenden Oberflächen oder Mauern, da dadurch das
Produkt beschädigt werden könnte.
• Verwenden Sie bei der Installation des Axis Produkts nur
geeignetes Werkzeug; zu hoher Kraftaufwand kann das
Produkt beschädigen.
• Verwenden Sie keine chemischen, ätzenden oder
aerosolhaltigen Reinigungsmittel. Verwenden Sie zur
Reinigung ein feuchtes Tuch.
• Verwenden Sie nur Zubehör, das den technischen
Spezifikationen des Produkts entspricht. Dieses ist von Axis
oder Drittanbietern erhältlich.
• Verwenden Sie nur Ersatzteile, die von Axis empfohlen bzw.
bereitgestellt wurden.
• Versuchen Sie nicht, das Produkt selbst zu reparieren. Wenden
Sie sich bei Service-Angelegenheiten an Axis oder an Ihren
Axis-Händler.
• Verwenden Sie dieses Axis-Produkt unter Beachtung der vor
Ort geltenden rechtlichen Bestimmungen.
• Das Produkt sollte mit einem geschirmten Netzwerkkabel (STP)
verbunden werden. Alle Kabel, die ein Produkt mit einem
Netzwerk-Switch verbinden, sollten geschirmt (STP) und für
ihren spezifischen Gebrauch geeignet sein. Stellen Sie sicher,
dass der Netzwerk-Switch ordnungsgemäß geerdet ist. Siehe
Electromagnetic Compatibility (EMC) auf Seite 2 bezüglich der
behördlichen Anforderungen.
Transport
• Transportieren Sie das Axis-Produkt nur in der
Originalverpackung bzw. in einer vergleichbaren Verpackung,
damit das Produkt nicht beschädigt wird.
Batteriewechsel
Dieses Axis-Produkt ist mit einer 3,0 V CR2032 Lithium-Batterie
als Stromversorgung für die interne Echtzeituhr (RTC)
ausgestattet. Unter normalen Bedingungen hält die Batterie
mindestens 5 Jahre. Bei entladener Batterie ist der Betrieb der
Echtzeituhr nicht mehr ausreichend gewährleistet, so dass die
Uhr bei jedem Systemstart zurückgesetzt wird. Sie erhalten eine
Protokollnachricht, wenn ein Batteriewechsel erforderlich ist.
Die Batterie sollte erst bei Bedarf gewechselt werden.
Unter www.axis.com/techsup finden Sie Informationen darüber,
was Sie beim Austausch der Batterie beachten müssen.
• Verbrauchte Batterien sind gemäß den Herstelleranweisungen
zu entsorgen.
• Explosionsgefahr bei fehlerhaftem Batteriewechsel!
• Die Batterie muss durch dasselbe oder ein gleichwertiges
Fabrikat ersetzt werden, das vom Hersteller zugelassen ist.
Leggere attentamente questa Guida all'installazione prima di
installare un prodotto Axis. Conservare la Guida all'installazione
per ulteriori riferimenti.
• Conservare il prodotto Axis in un ambiente asciutto e ben
ventilato.
• Evitare di esporre il prodotto Axis alle vibrazioni, agli urti o a
forte pressione. Non installare il prodotto su staffe instabili,
superfici o pareti instabili o vibranti, poiché ciò potrebbe
danneggiare il prodotto.
• Utilizzare solo strumenti idonei quando si installa il prodotto
Axis. Una forza eccessiva potrebbe danneggiare il prodotto.
• Non utilizzare sostanze chimiche, agenti caustici o detergenti
spray. Utilizzare un panno umido per la pulizia.
• Utilizzare solo accessori conformi con le specifiche tecniche
del prodotto. Queste possono essere fornite da Axis o da terze
parti.
• Utilizzare solo parti di ricambio fornite o raccomandate da
Axis.
• Non tentare di riparare il prodotto da soli, contattare Axis o il
rivenditore di zona Axis per assistenza.
• Questo prodotto Axis deve essere utilizzato in conformità alle
leggi e alle disposizioni locali.
• Il prodotto deve essere connesso utilizzando cavi schermati
(STP). Ogni cavo che connette il prodotto allo switch deve
essere schermato (STP) e concepito per l'uso specifico.
Assicurarsi che lo switch sia adeguatamente connesso a terra.
Per i requisiti normativi consultare Electromagnetic
Compatibility (EMC) alla pagina 2.
Trasporto
• Quando si trasporta il prodotto Axis, utilizzare l'imballo
originale o un imballo equivalente per evitare di danneggiare il
prodotto.
Sostituzione della batteria
Questo prodotto Axis utilizza una batteria al litio CR2032 da
3.0 V per alimentare il real-time clock (RTC) interno. In normali
condizioni questa batteria ha una durata di almeno 5 anni. La
batteria scarica influisce sul funzionamento dell'RTC, che viene
reimpostato ad ogni accensione. Un messaggio di registro
apparirà quando la batteria dovrà essere sostituita. La batteria
non deve essere sostituita a meno che non sia necessario.
Se la batteria non deve essere sostituita, contattare
www.axis.com/techsup per assistenza.
• Smaltire le batterie usate secondo le istruzioni del produttore.
• Rischio di esplosione se la batteria non viene sostituita
correttamente.
• Sostituire solo con una batteria identica o equivalente, come
raccomandato dal produttore.
Español
Medidas preventivas
Lea detenidamente esta Guía de instalación antes de instalar el
producto Axis. Guarde la Guía de instalación para poder
consultarla en el futuro.
• Guarde el producto Axis en un entorno seco y ventilado.
• Evite exponer el producto Axis a vibraciones, golpes o
presiones excesivas. No instale el producto en soportes
inestables ni en superficies o paredes inestables o con
vibraciones, ya que esto podría dañarlo.
• Utilice solo las herramientas apropiadas para instalar el
producto Axis; una fuerza excesiva podría dañarlo.
• No utilice productos químicos, agentes cáusticos ni
limpiadores en aerosol. Límpielo con un paño húmedo.
• Utilice solo accesorios que cumplan las especificaciones
técnicas del producto. Puede obtenerlos de Axis o de un
tercero.
• Utilice solo piezas de recambio suministradas o recomendadas
por Axis.
• No intente reparar el producto usted mismo, póngase en
contacto con Axis o con el distribuidor de Axis para los temas
de servicio técnico.
• Este producto Axis se utilizará de conformidad con la
legislación y normativas locales.
• El producto deberá ser conectado utilizando un cable de red
blindado (STP). Los cables conectados del producto al switch
deberán ser blindados (STP) y apropiados para su uso
específico. Asegúrese de que el switch esté correctamente
conectado a masa. Vea las Compatibilidades
Electromagnéticas (EMC), en la página 2, para los requisitos
reglamentarios.
Transporte
• A la hora de transportar el producto Axis, utilice el embalaje
original o uno equivalente para no dañar el producto.
Sustitución de la batería
Este producto Axis utiliza una batería de litio CR2032 3.0 de 3,0
V como fuente de alimentación para su reloj de tiempo real
interno (RTC). En condiciones normales, esta batería durará un
mínimo de 5 años. Cuando la batería tiene poca carga, el
funcionamiento del RTC se puede ver afectado, ya que esto
puede hacer que se reinicie cada vez que se encienda. Aparecerá
un mensaje de registro cuando sea necesario sustituir la batería.
No se debe sustituir la batería a menos que sea necesario.
Si necesita sustituir la batería, visite la página
www.axis.com/techsup para recibir asistencia.
• Deseche las baterías usadas según las instrucciones del
fabricante.
• Existe peligro de explosión si la batería se sustituye de forma
incorrecta.
• Utilice solo baterías de recambio iguales o equivalentes, de
acuerdo con las recomendaciones del fabricante.
AXIS Q1931-E/Q1932-E Installation Guide
1x
Page 7
1x
1x
1x
1x
1x
Camera owner authentication key
37306/R1.0/NOV09
Application License Code
The authentication key on this label is used to authenticate the owner/administrator of this Axis
camera. The key is associated with the camera’s unique serial number (S/N), as shown at the top of the
label. The authentication key is used for registering the camera with an AVHS service provider for hosted
video. For more information and help to find a local AVHS Service Provider, go to:
http://www.axis.com/products/avhs/
Please retain this document for future reference.
Through the registration of this license code and your acceptance of the license agreement
for the application, you will be able to use the application on one or more video products,
as specified on the label above.
Instructions
1. Download the application from www.axis.com/applications/
2. Install the application in the video product.
3. Register the License Code and video product’s serial number at
www.axis.com/applications/register/ to obtain the License Key.
4. Install the License Key file(s) on the video product(s) via the product’s web interface.
Label here
End-user license agreement:
Please note that this application is covered by a license agreement in which the terms and conditions for your
use of the application are set forth. The application must be downloaded, in accordance with the instructions
above, and the terms and conditions in the license agreement must be accepted prior to your registration of
the License Code with a product serial number.
The license agreement is available for your review at www.axis.com/applications/ and available for
acceptance when initiating the download of the application. If you do not agree to the terms and conditions of
the license agreement, you may not use the application.
©2006-2010 Axis Communications AB.
Axis is a registered trademark. All other company names and products are
trademarks or registered trademarks of their respective companies. We
reserve the right to introduce modifications without notice.
Part No. 38655
Axis Communications AB. Emdalavägen 14, 223 69 Lund, Sweden. Tel: +46 46 272 18 00 Fax: +46 46 13 61 30. www.axis.com
1x
1x
1x
1x
Page 8
AXIS Q1931-E/Q1932-E Installation Guide
Ø 3.5 - 7.5 mm
(0.14 - 0.29 in)
8-28 V DC max 11 W
20-24 V AC max 15 VA
+/- -/+
~
~
Power over Ethernet
IEEE 802.3af/802.3at Type 1 Class 3
AXIS Q1931-E/Q1932-E Installation Guide
1
T20
2
3
T20
1.0 Nm
(0.74 lb ft)
Page 9
Page 10
AXIS Q1931-E/Q1932-E Installation Guide
12
4
5
AXIS Q1931-E/Q1932-E Installation Guide
Page 11
6
STP Cat 5e
7
14
Page 12
8
9
AXIS Q1931-E/Q1932-E Installation Guide
AXIS Q1931-E/Q1932-E Installation Guide
Page 13
10
11
STP Cat 5e
Page 14
AXIS Q1931-E/Q1932-E Installation Guide
15
12
280 mm
(11 in)
13
14
AXIS Q1931-E/Q1932-E Installation Guide
15
T20
2.5 Nm ± 0.25 Nm
(1.8 lb ft ± 0.18 lb ft)
16
Page 15
Page 16
17
AXIS Q1931-E/Q1932-E Installation Guide
AXIS Q1931-E/Q1932-E Installation Guide
18
19
T20
2.9 Nm
(2.1 lb ft)
Page 17
Page 18
AXIS Q1931-E/Q1932-E Installation Guide
20
T20
2.5 Nm ±0.25 Nm
(1.8 lb ft ±0.18 lb ft)
AXIS Q1931-E/Q1932-E Installation Guide
Page 19
21
AXIS IP Utility
AXIS Camera Management
www.axis.com/warranty
www.axis.com/products/cam_q1931e/video.htm
www.axis.com/products/cam_q1932e/video.htm
Page 20
AXIS Q1931-E/Q1932-E Installation Guide
Installation Guide
AXIS Q1931-E Thermal Network Camera
AXIS Q1932-E Thermal Network Camera
© Axis Communications AB, 2014
Ver. 5.00
Printed: August 2014
Part No. 59045