Download ViewSonic PJD8653ws User guide

Transcript
On-screen Display Menus
The Projector has multilingual On-screen Display menus that allow you to
make image adjustments and change a variety of settings. The projector
will automatically detect the source.
How to operate
1. To open the OSD menu, press the “Menu” button on the remote control or on the
control panel.
2. When OSD is displayed, use the ◄►▲▼ buttons to select the desired item and
adjust the settings by the ◄► buttons.
icon, you could press the ► button to enter another sub
3. If the setting has
menu. Press the “Menu” button to close the sub menu after adjustment.
4. After adjusting the settings, press the “Menu” button to go back to the main
menu.
5. To exit, press the “Menu” button again. The OSD menu will be closed and the
projector will automatically save the new settings.
Picture
Color Mode
Bright
Wall Color
White
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Color Temp
Low
Color Space
Auto
Select
Main Menu
Enter
Sub Menu
22
http://www.pureglare.com.au
Exit
Settings