Download ViewSonic PJD8653ws User guide
Transcript
On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press the “Menu” button on the remote control or on the control panel. 2. When OSD is displayed, use the ◄►▲▼ buttons to select the desired item and adjust the settings by the ◄► buttons. icon, you could press the ► button to enter another sub 3. If the setting has menu. Press the “Menu” button to close the sub menu after adjustment. 4. After adjusting the settings, press the “Menu” button to go back to the main menu. 5. To exit, press the “Menu” button again. The OSD menu will be closed and the projector will automatically save the new settings. Picture Color Mode Bright Wall Color White Brightness Contrast Sharpness Saturation Hue Gamma Color Temp Low Color Space Auto Select Main Menu Enter Sub Menu 22 http://www.pureglare.com.au Exit Settings