Download Compaq ProLiant SL160z - G6 Server Specifications

Transcript
Figure 32 Removing the PCIe card
To install the PCIe card:
1.
Open the PCIe latch.
2.
Remove PCIe card or blank.
3.
Push the PCIe card into riser card connector.
4.
Close PCIe latch.
5.
Install screws.
Figure 33 Installing the PCIe card
System Battery
The server uses nonvolatile memory that requires 2 batteries to retain system information when power
is removed.
This 3-volt lithium coin cell battery is located on the system board.
Removal and Replacement Procedures
48