Download Sharp AR-FX8 Specifications

[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 8 ページ
２００３年１１月１２日　水曜日　午前９時４５分
<List of set values 1>
46-14
Purpose
Function (Content)
Adjustment
Used to adjust the reading density in the FAX
mode (Fine mode). (Only when FAX is installed.)
Section
Item
Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX Fine mode individual adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: PRINT START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
SIMULATION 46-14
EXP. LEVEL SETUP FAX(FINE). SELECT 0-14, AND PRESS START.
1
0. TRAY SELECT
1. PRINT START
1
2. EXP LEVEL
50
50
50
3. AUTO
4. 1.0
5. 2.0
50
50
50
6. 3.0
7. 4.0
8. 5.0
50
9. AUTO(H) 50
10. 1.0(H)
11. 2.0(H) 50
12. 3.0(H)
13. 4.0(H)
14. 5.0(H) 50
50
50
Select other than 0 - 2,
and press [START] key.
1
Press [CUSTOM SETTINGS] key.
SIMULATION 46-14
EXP. LEVEL SETUP FAX(FINE),INPUT VALUE 0-99, AND PRESS START.
4. 1.0
50
Select 1, and
press [START] key.
Press [START] key.
Press [CUSTOM SETTINGS] key.
Or copying is terminated.
SIMULATION 46-14
EXP. LEVEL SETUP FAX(FINE). NOW PRINTING.
Select 0, and
press [START] key.
Press [START] key or
press [CUSTOME SETTINGS] key.
SIMULATION 46-14
EXP. LEVEL SETUP FAX(FINE). SELECT 1-6, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
6. LCC
Select 2, and
press [START] key.
1
0
Paper feed selection
1
Print start (Default)
2
Exposure level selection
3
Auto
4
Exposure level 1
5
Exposure level 2
6
Exposure level 3
7
Exposure level 4
8
Exposure level 5
<Half tone>
9
Auto
10 Exposure level 1
11 Exposure level 2
12 Exposure level 3
13 Exposure level 4
14 Exposure level 5
<List of display values 1>
Normal display
ERROR display
“NOW PRINTING”
DOOR OPEN.
JAM
PAPER EMPTY.
<List of set values 2>
1
2
3
4
5
6
TRAY1
TRAY2
TRAY3
TRAY4
Manual feed
Side LCC
<List of set values 3>
3
Auto
4
Exposure level 1
5
Exposure level 2
6
Exposure level 3
7
Exposure level 4
8
Exposure level 5
<Half tone>
9
Auto
10 Exposure level 1
11 Exposure level 2
12 Exposure level 3
13 Exposure level 4
14 Exposure level 5
Press [START] key or
press [CUSTOME SETTINGS] key.
SIMULATION 46-14
EXP. LEVEL SETUP FAX(FINE). SELECT 3-14, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO
4. 1.0
5. 2.0
6. 3.0
7. 4.0
8. 5.0
9. AUTO(H)
10. 1.0(H)
11. 2.0(H)
12. 3.0(H)
13. 4.0(H)
14. 5.0(H)
1
AR-FX8 SIMULATIONS, FAX SOFTWARE SWITCH 6-8