Download Sharp AR-FX8 Specifications

Transcript
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 20 ページ
2003年11月12日 水曜日 午前9時45分
66-19
Setup
Used to backup the Address data
(Set values of rapid key dialing) into the flash
Memory (AR-MM9).
(When FAX is installed and FAX extended
memory is installed.)
Section
FAX
Item
Operation
Operation/Procedure Address data is backed up into Flash ROM.
Contents of backup data
•One-touch
•FTP expansion
•Group expansion
•Program
•User index
•Standard sender
•I-FAX sender registration
•Polling allow number
•Memory box
•Sender's name
•FAX sender
•Subject
•File name
•FAX receive select table
•iFAX receive YES/NO
The data other than the above are not backed
up.
SIMULATION 66-20
ADDRESS DATA (READ FROM FLASH ROM)
ARE YOU SURE ?
1. YES
2. NO
Purpose
Function (Content)
SIMULATION 66-19
ADDRESS DATA BACK UP. (WRITE TO FLASH ROM)
ARE YOU SURE?
1. YES
2. NO
Press [START] key.
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING...
1
After completion of reading
<Set value>
1
2
Purpose
Adjustment, setup, operation data output, check
(display, print)
Function (Content)
Used to print the FAX information (registrations,
communication management, file management,
system errors). (Only when FAX is installed.)
Section
FAX
Item
Data
Operation/Procedure Information related to FAX is printed.
1) Select information to be printed.
2) The selected information is printed.
3) The paper size is automatically selected by
the size stored in the image memory.
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1.REGISTERED
2.MANAGEMENT
3.FILE MANAGEMENT
4.SYSTEM ERROR
5.PROTOCOL
1
0
Select other than 0 and
press [START] key.
If there is no data to be printed,
the display returns to the initial state.
SIMULATION 66-19
ADDRESS DATA BACK UP. (WRITE TO FLASH ROM) EXECUTING...
1
(When 1 is selected)
SIMULATION 66-21
FAX INFORMATION PRINT OUT.EXECUTING...
1. REGISTERED
After completion of backup
<Set values>
Backup executed
No backup
After completion of printing
<List of set values>
66-20
Purpose
Function (Content)
Read/Write executed
Read/Write not executed
66-21
Press [START] key.
1
2
1
Setup
Used to restore the backup data (SIM 66-19) to
Address data. (When FAX is installed and FAX
extended memory is installed.)
Section
FAX
Item
Operation
Operation/Procedure Address data backed up with SIM 66-19 are read
from the option Flash ROM and written into the
machine.
However, data backed up in the Tiger series
cannot be restored to the machine. If an option
Flash ROM backed up in the Tiger series is
installed, the data in the option Flash ROM are
deleted.
1
2
3
4
5
REGISTERED
MANAGEMENT
FILE
MANAGEMENT
SYSTEM ERROR
PROTOCOL
AR-FX8 SIMULATIONS, FAX SOFTWARE SWITCH 6-20
Various registered information
Communication management information
File management information
System error information
Protocol information