Download Motorola Netopia Embedded Software Specifications

set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
voip
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
phone:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
codec G711U priority 2
codec G729A priority 3
codec G726_16 priority 4
codec G726_24 priority 5
codec G726_32 priority 6
codec G726_40 priority 7
sip-advanced-setting sip-dtmf-mode rfc2833
sip-advanced-setting sip-end-of-dial-marker off
sip-advanced-setting call-feature call-forwarding-all-option off
sip-advanced-setting call-feature call-forwarding-on-busy-option off
sip-advanced-setting call-feature call-forwarding-on-no-answer-option off
sip-advanced-setting call-feature call-waiting-option off
sip-advanced-setting call-feature call-conferencing-option off
sip-advanced-setting call-feature subscribe-do-not-disturb-option off
sip-advanced-setting call-feature subscribe-mwi-option off
sip-advanced-setting dsp-settings echo-option echo-on-cng-nlp
sip-advanced-setting dsp-settings echo-start-attenuation 8192
sip-advanced-setting dsp-settings echo-max-attenuation 16384
sip-advanced-setting dsp-settings echo-tail-length 0
sip-advanced-setting dsp-settings vad-option off
UPnP settings
set upnp option [ on | off ]
PCs using UPnP can retrieve the Gateway’s WAN IP address, and automatically create NAT port maps. This
means that applications that support UPnP, and are used with a UPnP-enabled Motorola Netopia® Gateway,
will not need application layer gateway support on the Motorola Netopia® Gateway to work through NAT.
The default is on.
You can disable UPnP, if you are not using any UPnP devices or applications.
set upnp log [ off | on ]
Enables or disables UPnP logging.
set upnp read-only [ off | on ]
Enables or disables
DSL Forum settings
TR-064 is a LAN-side DSL CPE configuration specification and TR-069 is a WAN-side DSL CPE Management
specification.
TR-064
DSL Forum LAN Side CPE Configuration (TR-064) is an extension of UPnP. It defines more services to locally
manage the Motorola Netopia® Gateway. While UPnP allows open access to configure the Gateway's features, TR-064 requires a password to execute any command that changes the Gateway's configuration.
set dslf-lanmgmt option [ off | on ]
Turns TR-064 LAN side management services on or off. The default is on.
321