Download Bosch PI.6..N24E Technical data

Product Information MAGIC.SENS -- Product range
PI -- 34.65d
7.2. Basket Guard SK 400
The basket guard SK 400 is installed over the
detector and protects the detector against
damage to the greatest possible extent.
If the detector is mounted in a sports facility, for
example, the basket guard prevents balls or
other sports equipment from hitting the detector
and damaging it.
7.3. Protective dust cover SSK 400
The protective dust cover SSK 400 is necessary
during construction work to protect an installed
detector base, with or without detector head,
from contamination. The protective dust cover
made of polypropylene (PP) is pushed onto the
installed detector base.
7.4. Detector console MK 400
The detector console MK 400 is used for the
DIBt--conforming installation of detectors above
frame sets, etc. The console is delivered with a
pre--installed base.
7.5. Detector Heating Element MH 400
The detector heating element MH 400 is required if the detector is used in an
environment where water condensation can occur, such as in a warehouse that must
be opened briefly for delivery vehicles.
The detector heating element is connected to the terminals + V / 0V in the detector base.
Operating voltage: 24V DC, resistance: 1kΩ, power consumption: 3W.
The heating is supplied with power either by the fed--through supply voltage via the
central unit or by a separate power supply.
With supply via the central unit, the number of detector heating elements depends on
the cable diameter and line length used.
Page 26 of 42
BDL--4998121218
A23.en /09.02.2007
ST--FIR/ PRM1 / deh