Download Blade Network Technologies RACKSWITCH G8124 Technical data

RackSwitch G8124 Command Reference
SNMPv3 Target Address Table Information
The following command displays SNMPv3 target address information:
show snmp-server v3 target-address
Command mode: All
This command displays the SNMPv3 target address table information, which is stored in the
SNMP engine.
Name
---------trap1
Transport Addr
--------------47.81.25.66
Taglist
------v1v2trap
Params
---------v1v2param
Table 2-9 SNMPv3 Target Address Table Information Parameters
Field
Description
Name
Displays the locally arbitrary, but unique identifier associated with
this snmpTargetAddrEntry.
Transport Addr
Displays the transport addresses.
Taglist
This column contains a list of tag values which are used to select target addresses for a particular SNMP message.
Params
The value of this object identifies an entry in the snmpTargetParamsTable. The identified entry contains SNMP parameters to be used
when generating messages to be sent to this transport address.
BMD00076, January 2009
Chapter 2: Information Commands „ 33