Download XL-DK225
Transcript
XL-DK225 [2] Test Mode • Setting the test mode During stand-by mode, press STOP button while 3 button and 44 button. Then, pressing down the press the CD button to enter the test mode. \ CD Step 1 TE ST IL isn’t done OPEN/CLOSE operation is using manual. IL isn’t done << / >> key input. Laser ON. Step 2 << / >> key input. Focus ON Step 3 << / >> key input. CLV Servo ON Step 4 << / >> key input. Tracking Servo ON Step 5 << / >> key input. Reading Sub-code and Display <<STOP>> key input. STOP and return to Step 1 Hold down << CD >> key for more than 2 sec. Start Auto Adjustment at current pick-up location. <<STOP>> key input. 2–2