Download XL-DK225

Transcript
XL-DK225
[2] Test Mode
• Setting the test mode
During stand-by mode, press STOP button while
3 button and
44 button. Then,
pressing down the
press the CD button to enter the test mode.
\
CD
Step 1
TE ST
IL isn’t done
OPEN/CLOSE operation is using manual.
IL isn’t done
<<
/ >> key input.
Laser ON.
Step 2
<<
/ >> key input.
Focus ON
Step 3
<<
/ >> key input.
CLV Servo ON
Step 4
<<
/ >> key input.
Tracking Servo ON
Step 5
<<
/ >> key input.
Reading Sub-code and Display
<<STOP>> key input.
STOP and return to Step 1
Hold down << CD >> key for more than 2 sec.
Start Auto Adjustment at current pick-up location.
<<STOP>> key input.
2–2