Download SCI CEO-24-HC22 Series Specifications

Table of Contents
A
Company Overview…….…………………………………………………….. A
1
On-Off Thermostats …….…..……………………………………………….. 1-x
2
On-Off Thermostats – Programmable…….…………………………….… 2-x
3
Proportional Thermostats…….…………………………………….……….. 3-x
4
Humidity Controllers…….……………………………………………..…….. 4-x
5
Fan Coil – Stand Alone Controllers…….………………………………..….. 5-x
6
A/C Stand-Alone Controllers…….…………………………….…………….. 6-x
7
Maxinet – Thermostat Network…….……………………………………….. 7-x
8
Communication / B.M.S. …….……………….……….…………………….. 8-x
9
Multi Zone Systems…….…………………………………………………….. 9-x
10
Dampers…….………………………….……………….…………………….. 10-x
11
Floor Heating…….………………………………….….…………………….. 11-x
12
Air Quality – GAQ controllers…….………………………………………….. 12-x
13
HVAC Analyzers …….……………….……………………………………….. 13-x
14
Special Controllers …….…………………………………………………….. 14-x
15
Sensors & Accessories …….……………………………..………………….. 15-x
16
Power Supplies…….……..…………………………….…………………….. 16-x
B
Types of Products…….………………………….…….…………………….. B
C
Contact Us …….……………………….……………….…………………….. C
D
Product Index…….…………………………………….…………………….. D
Export Catalogue 2012 / P048068
www.meitavtec.com | [email protected]
1
On/Off Thermostats
ETN-24-SUPER-SH
Wall mount, 24VAC thermostat, Cool/Heat or
Cool Only configuration, 1 or 3 fan speeds
AC
The ETN-24-SUPER-SH thermostat is a fully featured, stylish
thermostat suitable for light commercial, residential or
apartment applications.
COOL
It can control a large variety of HVAC systems with different
configurations. It offers both Cooling Only or Cool & Heat
control systems. It also has selectable number of heating
and cooling stages and multiple Fan Speeds.
HEAT
1/3
SPEEDS
The ETN-24-SUPER-SH is an attractive thermostat, with a
large, easy to read display.
AUTO FAN
COMPRESSOR
DELAY
Features
y
y
y
y
y
Wall mount, 24VAC thermostat
Selectable Configuration: Cool/Heat or Cool only
1 or 3 Fan speeds
Input – Normally open – Voltage free with 2 options
selectable:
* Option A – thermostat will turn ‘OFF’
* Option B – thermostat will change set point (Economy
Mode)
External Temperature Sensor - Option
Models
Model
y
y
y
y
y
y
ECONOMY
Energy saving – cost efficient, Environmental
Friendly algorithms and logic
Fault input - To be used with door switch,
window contact
Selectable display – ambient temperature or set
temperature only
Offset – for temperature reading adjustment
Set point limits - password protected
Lock buttons – password protected
EXT.
SENSOR
OPTION
Wiring diagram
Cool
Heat
Speeds
ETN-24-C1-1S-SH
1
N/A
1
ETN-24-C1-3S-SH
1
N/A
3
ETN-24-C2-1S-SH
2
N/A
1
ETN-24-C2-3S-SH
2
N/A
3
ETN-24-C3-1S-SH
3
N/A
1
ETN-24-HC11-1S-SH
1
1
1
ETN-24-HC11-3S-SH
1
1
3
ETN-24-HC12-1S-SH
2
1
1
ETN-24-HC12-3S-SH
2
1
3
ETN-24-HC22-1S-SH
2
2
1
ETN-24-HC23-1S-SH
3
2
1
www.meitavtec.com | [email protected]
1-1
On/Off Thermostats
ETN-24-SUPER-SI
Wall-mount, 24VAC thermostat, Cool & Heat or Heat
Pump- selectable, multiple heating & cooling stages,
Auto-Fan selectable, IR option
The ETN-24-SUPER-SI thermostat is a fully featured, stylish
thermostat, suitable for light commercial, residential or
apartment applications.
COOL
HEAT
It can control a large variety of HVAC systems with
different configurations; both Cool & Heat or Heat Pump
systems and has a selectable number of heating and
cooling stages.
ECONOMY
The ETN-24-SUPER-SI is an attractive, wall mount
thermostat with a large, easy to read display.
AUTO FAN
Features
y 24VAC thermostat
y Selectable display – ambient temperature or set
y
Selectable Configuration: Cool/Heat or Heat Pump
y
Input – Normally open – Voltage free. To be used
with door switch, window contact, etc. 2 options
selectable:
y Offset – for temperature reading adjustment
y Set point limits password protected
TIMER
°C
°F
y External Temperature Sensor - Option
y Lock buttons – password protected
* Option A – thermostat will turn ‘OFF’
* Option B – thermostat will change set point
(Economy Mode)
y
temperature only
y Emergency heat selectable in heat pump mode
y IR option – for hand held remote control
LOCK OPT.
EXT.
SENSOR
OPTION
Energy saving – cost efficient, environmental
friendly thermostat
RT03
Models
Model
1-2
Wiring diagram
Cool
Heat
Speeds
ETN-24-HC11-1S-SI
1
1
1
ETN-24-HC22-1S-SI
2
2
1
ETN-24-HC32-1S-SI
2
3
1
ETN-24-HP21-1S-SI
1
2
1
ETN-24-HP32-1S-SI
2
3
1
ETN-24-HP42-1S-SI
2
4
1
www.meitavtec.com | [email protected]
On/Off Thermostats
ETN-24-SUPER-SF
Wall mount, 24VAC thermostat, H/C or Heat
Pump configuration, with Filter counter
The ETN-24-SUPER-SF thermostat is a fully featured,
stylish thermostat suitable for light commercial,
residential or apartment applications.
COOL
HEAT
It can control a large variety of HVAC systems with
different configurations. It is applicable both for
Cool/Heat or Heat Pump systems and has a selectable
number of heating and cooling stages.
HP/HC
The ETN-24-SUPER-SF is an attractive, wall mount
thermostat, with large, easy to read display.
AUTO FAN
°C
Features
y Wall mount, 24VAC thermostat
°F
y Energy saving – cost efficient,
y Cool/Heat or Heat Pump – selectable by choosing
environmental friendly thermostat
y Filter counter in hours- range: 0-900
DIP switch position
y Fault Input – Normally open – Voltage free-
(adjustable)
indication on display only. Turn system Off or
y External Temperature Sensor- option
Economy - selectable
y Lock – Unlock buttons function
y Selectable display – ambient temperature or set
y Emergency heat selectable in heat pump
temperature only – selectable by choosing DIP
mode
AUTO
CHANGE-OVER
FAULT
INPUT
y Multiple heating and cooling stages
switch position
y Offset – for temperature reading adjustment
y IR remote control- option
ALARM
y Set point limits - password protected
EXT.
SENSOR
OPTION
Wiring
diagram
Models
Model
Cooling
Stages
Heating
Stages
Fan
Speeds
Window
Contact
ETN-HC11-1S
1
1
1
+
ETN-HC22-1S
2
2
1
+
ETN-HC32-1S
2
3
1
+
ETN-HP21-1S
1
2
1
+
ETN-HP32-1S
2
3
1
+
ETN-HP42-1S
2
4
1
+
www.meitavtec.com | [email protected]
RT03
1-3
On/Off Thermostats
FMH-220-HP11-3S-IR
Flush Mount thermostat, 220VAC, Heat & Cool
AC
outputs (Heat Pump configuration) with 3 fan
speeds and IR
COOL
The FMH-220-HP11-3S-IR is a fully featured, flushmount thermostat suitable for commercial or
residential applications to control a large variety of
HVAC systems.
This easy to operate thermostat has one output for
Cool and one output for Heat Pump (On/Off), 3 fan
speeds and IR option. The FMH-220-HP11-3S-IR is a
smart looking thermostat with a soft aesthetic shape
ECONOMY
°C
and a large, easy to read LCD display.
°F
Features
y Flush mount, 230VAC Thermostat
y Heat Pump configuration
y 3 Fan Speeds
y Auto fan- selectable
y Auto speed - selectable
y Remote Control – option
Wiring diagram
1-4
www.meitavtec.com | [email protected]
y Energy saving – cost efficient, environmental friendly
COMPRESSOR
DELAY
thermostat
y Daily digital timer – optimal when you are a way or
asleep (from Remote Control)
y 3-minute compressor delay
y Temperature offset – adjustable
RT03
On/Off Thermostats
FMH-24-C2-3S-IR
Flush Mount Thermostat, 24VAC, Cool only -
AC
two outputs for Cool, 3 fan speeds and IR
option
COOL
The FMH-24-C2-3S-IR is a fully featured, flushmount thermostat suitable for commercial or
residential applications to control a large variety of
HVAC systems.
It is targeted for Cool and Fan Only applications and
has
ECONOMY
2 outputs for Cool and 3 fan speeds.
The FMH-24-C2-3S-IR is a smart looking thermostat
with large, easy to read LCD display and a simple
user interface.
TIMER
°C
Features
y Flush mount, 24VAC thermostat
y Remote Control – optional
y Cool Only Thermostat, with 2 Cooling stages
y Energy saving – operates up to 2 compressors,
y Fan modes: Fan on / Auto fan / Auto speed
°F
if needed by smart logic algorithms
y 3-minute compressor delay (to protect the
y 2 outputs for Cool
compressor)
y 3 Fan Speeds
y Automatic temperature offset
y Auto fan - selectable
y Daily, digital Timer from Remote control –
y Auto speed - selectable
optimal when you are asleep or away
Wiring diagram
RE2
Compressor 2 (0.5A)
RE1
Compressor 1 (0.5A)
3
Low
2
Medium
1
High
Fan (0.5A)
C
Main Input 24VAC
R
www.meitavtec.com | [email protected]
1-5
On/Off Thermostats
FMH-220-HC11-3S-IR
Flush Mount, 220VAC thermostat with Heat
and Cool outputs, 3 fan speeds and IR option
The FMH-220-HC11-3S-IR is a fully featured, flushmount
thermostat
suitable
for
commercial
COOL
or
residential applications to control a large variety of
HEAT
HVAC systems. This easy to operate thermostat has
one output for Cool and one output for Heat
Element (On/Off), 3 fan speeds and IR option. The
FMH-220-HC11-3S-IR is a smart looking thermostat
AUTO FAN
with a soft aesthetic shape and a large, easy to read
LCD display.
Features
y Flush mount, 230VAC thermostat
y 2 separate outputs for Cool and Heat
y 3 Fan Speeds
y Remote Control – option
y Temperature offset – adjustable
y Daily, digital Timer from RC – optimal when you
are asleep or awa
COMPRESSOR
DELAY
y Energy saving – cost efficient,
environmental friendly thermostat
y 3 minutes compressor delay
(to protect the compressor)
y Auto fan – selectable
y Auto speed – selectable
y Type of heater (electric heater or oil heater) –
selectable
Wiring diagram
1-6
www.meitavtec.com | [email protected]
TIMER
RT03
On/Off Thermostats
FMT-24-SUPER
AC
24VAC, Flush-mount thermostat, with up to 3 stages
for Heat and 2 stages for Cool
The FMT24-SUPER thermostat is a flush- mount, stylish
thermostat for commercial or residential applications.
It has both Heat/Cool and Heat Pump configurations and
multiple cooling and heating stages. It offers useful
features for cold locations, such as Low Temperature Alarm
and Emergency Heat.
HEAT
Overall, the FMT24-SUPER is a sleek, attractive thermostat
and a convenient solution for many HVAC systems.
Features
y Main input- 24VAC
y Economy mode
y User Selectable applications:
y Emergency Heat – compressor stops working;
only Heat Element will be used for Heating
* Heat/Cool or Heat Pump
ECONOMY
HP/HC
y Low temp. alarm indication –
* Electric Heat or Oil/Gas
when less than 6°C (45°F)
* Heat Pump in Heat or Heat Pump in Cool
y With/without compressor delay
y C or F temp. scale display
y IR remote control- option
ALARM
y Offset – for temp. reading adjustment ±6°C/F
y Temp. limits for Cool & Heat - 10..30°C (50..88°F)
Models
Cooling Stages
Heating Stages
Fan Speeds
FMT-24-HC11-1S
1
1
1
FMT-24-HC22-1S
2
2
1
FMT-24-HP21-1S
1
2
1
FMT-24-HP32-1S
2
3
1
ALL-IN-ONE
ALL-IN-ONE
1
Model
FMT-24-SUPER
Wiring diagram
www.meitavtec.com | [email protected]
1-7
On/Off Thermostats
ERT-208
Wall mount, 230VAC thermostat,
with 2 compressors - Heat-Pump configuration,
1 fan speed, 12-hour timer and a Remote Control
option.
COOL
The ERT-208 is a fully featured, stylish thermostat
HEAT
suitable for Central Mini-Duct or Split-Unit A/C systems.
It has 2 compressors – heat pump configuration with 1
fan speed, 12-hour timer and a remote control option.
The ERT-208 is an easy to use thermostat, with a large,
AUTO FAN
easy to read LCD display.
Features
TIMER
y Wall-mount, 230VAC thermostat
y Temperature set-point limits
y 2 compressors, Heat Pump configuration
y 12-hour Timer - automatically turns on/off unit within
y 1 fan speed
y Auto Fan
y 3 minute compressor delay for compressor
protection
y Display of Ambient temperature / Set temperature
y Energy saving – cost efficient, environmental
friendly thermostat
Wiring diagram
1-8
www.meitavtec.com | [email protected]
12-hours
y Option for a Remote Control –
(with 24-hour timer)
y Large & easy to read LCD display
y Comfortable silicon rubber buttons
ECONOMY
°C
On/Off Thermostats
ERT-209
Wall mount, 230VAC Thermostat,
AC
with 2 compressors for Cooling and 2 Heat Elements,
Timer and IR (option)
COOL
The ERT-209 is a fully featured thermostat suitable for
Central Mini-Duct or Split-Unit AC systems.
HEAT
It has outputs for 2 compressors and 2 Heat Elements –
H/C configuration, 1 fan speed, 12-hour timer and a remote
control option. The ERT-209 is an easy to use thermostat,
with a large, easy to read display.
COMPRESSOR
DELAY
TIMER
Features
y Wall-mount, 230VAC thermostat
y 2 compressors for cooling, 2 heat elements for heating
y 1 fan speed
y 12-hour Timer - automatically turns on/off
within 12-hours
y Remote Control - optional
y Energy saving – cost efficient, environmental
friendly thermostat
°C
y 3 minute delay for compressor protection
y Heat Off Fan delay
RT03
y Ambient temperature display – selectable
y Large & easy to read LCD display
Wiring diagram
www.meitavtec.com | [email protected]
1-9
On/Off Thermostats
ERT100-LCD-IR
AC
Wall mount, 230VAC Thermostat, Heat-Pump
configuration, 12-hour timer and an option for a
Remote Control Unit.
COOL
The ERT100-LCD-IR is a fully featured thermostat
HEAT
suitable for central mini-duct or split-unit AC systems.
It has heat pump configuration, 3 fan speeds, 12-hour
timer and a remote control option.
AUTO FAN
The ERT100-LCD-IR is an easy to use thermostat with
a clear, easy to read LCD display.
TIMER
Features
y
Wall-mount, 230VAC thermostat
y
1 compressor for both Cool and Heat (Heat
y
Energy saving – cost efficient, Environmental Friendly
°C
thermostat
Pump)
y
Remote Control - optional
y
3 fan speeds
y
Large & easy to read LCD display
y
Auto Fan - selectable
y
Comfortable silicon rubber buttons
y
3 minute compressor delay
y
Ambient temperature display (display/hide) - optional
y
12-hour Timer - automatically turns the unit
ECONOMY
RT03
on/off within 12-hour
Wiring diagram
1-10
www.meitavtec.com | [email protected]
On/Off Thermostats
TED-220-HP11-3S
Wall mount, 220VAC thermostat, with 2 outputs for
AC
Cool & Heat (Heat Pump), 3 fan speeds and LCD
display
FC
The TED-220-HP11-3S thermostat is suitable for commercial
or residential applications to control a large variety of HVAC
COOL
systems, including fan coils.
HEAT
This mechanical thermostat offers Cool and Heat outputs as
well as 3 fan speeds, making the TED-220-HP11-3S the
perfect solution for basic and simple climate control.
COMPRESSOR
DELAY
Features
y Wall mount, 220VAC main supply
y 2 Outputs for Cool and Heat (HP)
y Energy saving – cost efficient, Environmental
Friendly logic
y Large, easy to read LCD display
y 3 Fan Speeds
y External Temperature Sensor – option
y Display for ambient temperature and set point
ECONOMY
°C
EXT.
SENSOR
OPTION
y Compressor delay algorithm
Wiring Diagram
External sensor
(option)
T
T
3
Fan Low (2.6)
2
Fan Medium (2.6)
HE
Heat Pump (0.5A)
1
RE
Fan High (2.6)
Compressor (0.5A)
0
Main Input 230VAC
~
www.meitavtec.com | [email protected]
1-11
On/Off Thermostats
TED-220-HC11-3S
Wall
mount,
220VAC
thermostat,
with
AC
temperature display suitable, for fan coil
applications and Air Conditions with H/C
FC
configurations (no Heat Pump).
The TED-220-HC11-3S thermostat is suitable for
COOL
commercial or residential applications to control a
large variety of HVAC systems, including fan coils.
HEAT
This mechanical thermostat offers Cool and Heat
outputs as well as 3 fan speeds, making the TED220-HC11-3S the perfect solution for basic and
ECONOMY
simple climate control.
°C
Features
y Wall mount, 220VAC Main supply
y Energy saving – cost efficient, Environmental Friendly logic
y 2 Outputs for Cool and Heat
y Large, easy to read LCD display
y 3 Fan Speeds
y Display for ambient temperature and set point
y External Temperature Sensor - option
Wiring Diagram
1-12
www.meitavtec.com | [email protected]
EXT.
SENSOR
OPTION
On/Off Thermostats
TED-24-SUPER
Wall-mount, 24VAC thermostat, for both AC
applications as well as Fan Coils.
AC
The TED-24-SUPER thermostat suits commercial or
FC
residential applications to control a large variety of HVAC
systems, including fan coils.
COOL
This mechanical thermostat offers up to 2 stages for Cool
HEAT
and 2 stages for Heat, making the TED-24-SUPER the
perfect solution for basic and simple climate control.
Features
y Wall mount, 24VAC thermostat
y Heat Pump or Heat/Cool configuration available;
jumper selectable
y LCD display for ambient temperature and set
point
y External Temperature Sensor – option
ECONOMY
y Suitable for fan coil applications
y °C or °F scale available- jumper selectable
y Heat Output configuration- Electric or Oil/Gas;
y Fault input (24VAC) – red led indication
°C
°F
jumper selectable
COMPRESSOR
DELAY
y Energy saving – cost efficient, environmental friendly
EXT.
SENSOR
OPTION
thermostat
Wiring Diagram
www.meitavtec.com | [email protected]
1-13
On/Off Thermostats
TED-220-C1-3S
Wall
mount,
220VAC
thermostat,
with
temperature display, suitable for Fan Coil
applications (Cool only)
COOL
The TED-220-C1-3S thermostat is suitable for
commercial or residential applications to control a
large variety of Fan Coil systems.
ECONOMY
This mechanical thermostat offers an output for Cool
°C
as well as 3 fan speeds, making the TED-220-C1-3S
the perfect solution for basic and simple climate
control in Cool Only configuration systems.
Features
y Wall mount, 220VAC thermostat
y Output for Cool valve
y External Temperature Sensor – optional
Wiring Diagram
External sensor
(option)
T
LO
Fan Low (2.6)
ME
Fan Medium (2.6)
HI
Fan High (2.6)
RE
Compressor (0.5A)
0
Main Input 230VAC
~
1-14
thermostat
y Large, easy to read LCD display
y 3 Fan speeds
T
y Energy saving – cost efficient, Environmental Friendly
www.meitavtec.com | [email protected]
y LCD display for ambient temperature and set point
On/Off Thermostats
TED-24-AUTO-SUPER
Wall-mount, 24VAC thermostat, with 2 outputs for
AC
Heat and 1 output for Cool with 1 fan speed (24VAC)
The TED-24-AUTO-SUPER thermostat suits commercial or
residential applications to control a large variety of HVAC
systems.
HEAT
This mechanical thermostat offers 1 stage for Cool and 2
stages for Heat. Its easy to change configuration, using only
jumpers,
makes
the
TED-24-AUTO-SUPER
the
perfect
AUTO FAN
solution for basic and easy climate control.
Features
y Wall mount, 24VAC thermostat
y Heat Pump or Heat/Cool configuration available;
jumper selectable
y Heat Output configuration- Electric or Oil/Gas;
jumper selectable
y LCD display for ambient temperature and set
point
y External Temperature Sensor – option
AUTO
CHANGE-OVER
y °C or °F scale available- jumper selectable
y Fan/Auto Fan
y Auto-Change-Over mode
y Energy saving – cost efficient, environmental friendly
thermostat
Wiring Diagram
www.meitavtec.com | [email protected]
1-15
On/Off Thermostats
TES-220-HC11-3S
Wall mount, 220VAC thermostat, for Air
Conditioning & Fan Coil applications.
AC
The TES-220-HC11-3S thermostat suits
FC
commercial or residential applications and can
control a large variety of HVAC systems,
COOL
including fan coils.
HEAT
This mechanical thermostat offers Cool and
Heat outputs as well as 3 fan speeds, making
the TES-220-HC11-3S the perfect solution for
basic and simple climate control.
ECONOMY
°C
Features
y Wall mount, 220VAC thermostat
y Outputs for Cool & Heat
y Energy saving – cost efficient, Environmental Friendly
thermostat
y Simple design and logic
y 3 Fan speeds
y External Temperature Sensor – option
Wiring Diagram
External sensor
(option)
T
T
3
Fan Low (2.6)
2
Fan Medium (2.6)
HE
H. Element (0.5A)
1
RE
Fan High (2.6)
Compressor (0.5A)
0
Main Input 230VAC
~
1-16
www.meitavtec.com | [email protected]
EXT.
SENSOR
OPTION
On/Off Thermostats - Programmable
ETN-24-SUPER-3S-FP-PROG-EU-C
24VAC, wall-mount thermostat, with 5-1-1 days,
AC
Europe-type weekly program built-in, with Freeze
Protection, for multiple HVAC configurations
FC
The ETN-24-Super-3S-FP-Prog-EU-C is an aesthetic, easy to
use thermostat for commercial and residential applications.
COOL
It can control a large variety of HVAC systems with either
Heat/Cool or Heat Pump configurations and offers numerous
HEAT
selectable or user adjustable features, such as Freeze
Protection to protect system from freezing, Offset for
temperature reading or an option for 3 minute compressor
delay.
AUTO
CHANGE-OVER
Its 5-1-1 program, with 4 x start time/ stop time per day is easy to use and can provide 24-hour comfort as well as
energy savings.
Overall, the ETN-24-Super-3S-FP-Prog-EU-C is an attractive, wall mount thermostat with a large, easy to read
display.
HP/HC
Features
ECONOMY
y Wall-mount, 24VAC thermostat
y Energy saving thermostat
y DIP switch selectable configurations:
y Lock / Unlock thermostat buttons
* Heat/Cool or Heat Pump system
y Temp. scale - °C
* Electric or Oil/Gas heat system
y 3 minutes compressor delay – optional (DIP
* Heat Pump in Cool or Heat
y 5-1-1 programmable – 4 x start time / stop time per day
y Modes: Cool, Heat, Auto Mode, Fan Only
y 3 fan speed + Auto Speed
y Set point limits- 10…30°C
y Freeze protection – adjustable
TIMER
switch selectable)
y Internal or external sensor – DIP switch
selectable
y External sensor- option
°C
EXT.
SENSOR
OPTION
y IR remote control – option
y Weekly Timer
FREEZE
PROTECT
y Offset – for temp. reading adjustment - ±6°C
LOCK OPT.
Wiring diagram
www.meitavtec.com | [email protected]
2-1
On/Off Thermostats - Programmable
ETN-24-SUPER-PROG-EU Series
24VAC, wall-mount thermostat,
AC
with 5-1-1, Europe-type weekly program built-in
and multiple Cooling and Heating stages
COOL
The ETN-24-Super-Prog-EU is a stylish thermostat well
suitable for commercial and residential applications.
It can control a large variety of HVAC systems with
either Heat/Cool or Heat Pump configurations and
offers a selectable number of heating and cooling
stages.
Its 5-1-1 program, with 2 x start time/ stop time per
day is easy to use and can provide 24-hour comfort as
ECONOMY
well as energy savings.
Overall, the ETN-24-Super-Prog-EU is an attractive,
PROG
wall mount thermostat with a large, easy to read
display.
TIMER
Features
y Wall-mount, 24VAC thermostat
y External sensor- option
y DIP switch selectable configurations:
y Lock – Unlock thermostat buttons
* Heat/Cool or Heat Pump system
y °C scale, 24hrs clock
* Electric or Oil/Gas heat system
y 3 minutes compressor delay – optional (DIP switch
y 5-1-1 programmable – 2 x start time / stop time
y Offset – for temperature reading adjustment
y Internal or external sensor – DIP switch selectable
per day
y 1 fan speed
y IR remote control – option
y Emergency Heat selectable in Heat Pump mode
y Weekly Timer
y Set point limits- 10…30°C
Models
2-2
EXT.
SENSOR
OPTION
selectable)
* Heat Pump in Cool or Heat
Cooling
stages
Heating
stages
ETN-24-HC11-PROG-EU
1
1
ETN-24-HC22-PROG-EU
2
2
ETN-24-HP21-PROG-EU
1
2
ETN-24-HP32-PROG-EU
2
3
Model
°C
www.meitavtec.com | [email protected]
LOCK OPT.
On/Off Thermostats - Programmable
ETN-24-SUPER-PROG-7DAYS-US Series
24VAC, Wall mount thermostat with 7-days,
AC
USA-type weekly program built-in
and multiple Cooling and Heating stages
COOL
The ETN-24-Super-Prog-7 Days-US is a stylish thermostat
that is well suited for commercial and residential
applications.
It can control a large variety of HVAC systems with either
Heat/Cool or Heat Pump configurations and offers a
selectable number of heating and cooling stages.
Its 7-Day program, with 1 period (Set Cool/Set Heat) per
day, is easy to use and can provide 24-hour comfort as well
ECONOMY
as energy savings.
Overall, the ETN-24-Super-Prog-7 Days-US is an attractive,
TIMER
wall mount thermostat with a large and easy to read
display.
PROG
Features
°C
y Wall-mount, 24VAC thermostat
y Filter counter in hours- range: 0-900
(adjustable)
y DIP switch selectable configurations:
y Offset for temp. reading adjustment - ±6°C
* Heat/Cool or Heat Pump system
RT03
y Set point limits for Cool & Heat (5…30°C)
* Electric or Oil/Gas heat system
y External Temperature Sensor- option
* Heat Pump in Cool or Heat
y 7-day programmable – 1 period per day, each with Set
y Lock – Unlock thermostat buttons
y Voltage-free, normally-open fault input. Will
Heat and Set Cool
LOCK OPT.
COMPRESSOR
DELAY
show signal on thermostat when active
y Separate Cooling & Heating set points
y 3 minutes compressor delay – optional (DIP
y Emergency Heat available in Heat Pump mode
switch selectable)
y °C scale, 24 hr clock
Wiring diagram
Models
Cooling
stages
Heating
stages
ETN-24-HC11-7DAYS-PROG-US
1
1
ETN-24-HC22-7DAYS-PROG-US
2
2
ETN-24-HP21-7DAYS-PROG-US
1
2
ETN-24-HP32-7DAYS-PROG-US
2
3
ALL-IN-ONE
ALL-IN-ONE
Model
ETN-24-SUPER-7DAYS-PROG-US
www.meitavtec.com | [email protected]
2-3
On/Off Thermostats - Programmable
ETN-24-SUPER-PROG-US Series
24VAC, wall-mount thermostat
AC
with 5-1-1, USA-type weekly program built-in
and multiple Cooling and Heating stages
The ETN-24-Super-Prog-US is a stylish thermostat
COOL
well suitable for commercial and residential
applications.
It can control a large variety of HVAC systems with
either Heat/Cool or Heat Pump configurations and
offers a selectable number of heating and cooling
stages.
Its 5-1-1 program, with 4 periods (Set Cool / Set
Heat) per day, is easy to use and can provide 24hour comfort as well as energy savings.
Overall, the ETN-24-Super-US is an attractive, wall
mount thermostat with a large, easy to read display.
°C
Features
y Wall-mount, 24VAC thermostat
y Set point limits- 5…30°C - adjustable
y DIP switch selectable configurations:
y External sensor- option
* Heat/Cool or Heat Pump system
y Lock – Unlock thermostat buttons
* Electric or Oil/Gas heat system
y IR remote control- option
* Heat Pump in Cool or Heat
y °C temperature scale
y 5-1-1 programmable – 4 periods per day, each
with Set Heat and Set Cool
y Internal or external sensor –
DIP switch selectable
y Offset for temperature reading adjustment +/-6°C
y Timer – AM/PM
y Energy saving – cost efficient, environmental
friendly thermostat
Models
Heating
stages
ETN-24-HC11-PROG-US
1
1
ETN-24-HC22-PROG-US
2
2
ETN-24-HP21-PROG-US
1
2
ETN-24-HP32-PROG-US
ETN-24-SUPER-PROG-US
2-4
Wiring
Cooling
stages
Model
2
3
ALL-INONE
ALL-INONE
www.meitavtec.com | [email protected]
TIMER
y 3 minutes compressor delay –
DIP switch selectable
y Double Set points (Cool & Heat)
LOCK OPT.
diagram
RT04
On/Off Thermostats - Programmable
FMT-24-SUPER-PROG
Flush-mount, 24VAC thermostat, 5-1-1
AC
programmable, with various selectable A/C
configurations
The FMT-24-SUPER-PROG is a stylish thermostat suitable
for commercial and residential applications. It can control a
large variety of HVAC systems with either Heat/Cool or Heat
Pump configurations and offers a selectable number of
heating and cooling stages.
°F
Its 5-1-1 program, with 4 periods (Set Cool/Set Heat) per
day, is easy to use and can provide 24-hour comfort as well
as energy savings.
Overall, the FMT-24-SUPER-PROG is an attractive
thermostat with a large and easy to read display.
Features
y Flush-mount, 24VAC thermostat
y Energy saving – cost efficient, Environmental
Friendly thermostat
y DIP switch selectable configurations:
* Heat/Cool or Heat Pump system
y Offset – for temperature reading adjustment
* Electric or Oil/Gas heat system
y 2 set points (Cool & Heat)
* Heat Pump in Cool or Heat
EXT.
SENSOR
OPTION
y Set point limits- password protected
y 5-1-1 programmable; 4 periods per day, each with
y External sensor- option
Set Heat and Set Cool.
y Lock – Unlock buttons function
y Auto Change-Over mode option
y IR remote control- option
y AM/PM clock
y
Wiring diagram
Models
Cooling
Stages
Heating
Stages
Fan
Speeds
FMT-24-HC11-PROG
1
1
1
FMT-24-HC22-PROG
2
2
1
FMT-24-HP21-PROG
1
2
1
FMT-24-HP32-PROG
2
3
1
ALL-IN-ONE
ALL-IN-ONE
1
Model
FMT-24-SUPER-PROG
www.meitavtec.com | [email protected]
2-5
On/Off Thermostats - Programmable
ETN24-HC21-PROG-ECO
Wall-mount, 24VAC thermostat, with weekly
program built-in and fresh air damper output
The ETN-24-HC21-PROG-ECO is a fully featured,
stylish
thermostat,
suitable
for
commercial
DAMPER
CONTROL
and
residential applications. It can control a large variety of
HVAC systems with different configurations. It offers a
selectable number of heating and cooling stages and a
HEAT
fresh Air Damper output - damper opens automatically
°F
or manually.
The
ETN-24-HC21-PROG-ECO
is
an
attractive
AUTO FAN
thermostat with a large, easy to read display.
ECONOMY
Features
y 24VAC wall-mount thermostat
y 2 stages of Heat and 1 stage of Cool
y Adjustable Electric and Oil/Gas system
y Outdoor sensor- option
y Fresh Air Damper output
y 5-1-1 programmable; 4 periods per day, each
with Set Heat and Set Cool
Wiring diagram
2-6
www.meitavtec.com | [email protected]
y Energy saving – cost efficient, Environmental Friendly
RT03
logic
COMPRESSOR
DELAY
y Offset – for temperature reading adjustment
y Freeze Protection even when thermostat is OFF
y Economy mode (set back)
y °F scale, AM/PM clock
PROG
EXT.
SENSOR
OPTION
On/Off Thermostats - Programmable
ETN24-HC21-PROG-OA
24VAC, wall-mount thermostat, with 5-1-1 USA-
AC
type weekly program built-in and fresh air damper
output.
The ETN-24-SUPER-PROG-OA is a fully featured, stylish
thermostat suitable for industrial, commercial and
COOL
residential applications.
HEAT
It can control a large variety of HVAC systems with
different configurations; Cool, Heat (Electric or Gas)
systems. It also offers selectable number of heating and
cooling stages and Fresh Air Damper output.
°F
The ETN-24-SUPER-PROG-OA is an attractive, with a
large, easy to read display.
RT03
Features
y 24VAC, wall -mount thermostat
y 2 stages of Heat and 1 stage of Cool
y Electric or oil/gas system- selectable
y External sensor- option
y Fresh Air Damper output – 24VAC
* Controlled by time ONLY (select number of
minutes per ½ hour- min.= 0 min (FAD never
y Energy saving – cost efficient, environmental friendly
PROG
thermostat
TIMER
y 5-1-1 programmable; 4 periods per day, each with
Set Heat and Set Cool
EXT.
SENSOR
OPTION
y IR remote control- option (programmable)
y Offset – for temperature reading adjustment
y °F scale, AM/PM clock
opens), max.= 30 min (FAD is always open)
*
FAD will NOT work between 7 PM and 7 AM
Wiring diagram
www.meitavtec.com | [email protected]
2-7
On/Off Thermostats - Programmable
ETN24-HC21-PROG-TS
24VAC, wall-mount thermostat, with 5-1-1 USAtype weekly program built-in and special
damper control in Heat mode.
DAMPER
CONTROL
The ETN-24-SUPER-PROG-TS is a fully featured and
stylish thermostat, especially designed for two-story
residential applications.
Thermostat on first floor, remote sensor on second
HEAT
floor and motorized damper in duct system.
In heat mode, damper closes when temperature on
second floor is 2 degrees (adjustable) higher than on
first floor.
This diverts all air to first floor and balances
temperature throughout the house.
COMPRESSOR
DELAY
Features
y Wall-mount, 24VAC thermostat
y 2 stages of Heat and 1 stage of Cool
y Electric or oil/gas system- selectable
y Remote 2nd floor temperature sensor
y Power open/Spring close damper output- 24VAC
(works only in Heat mode
y °F scale, AM/PM clock
Wiring diagram
2-8
www.meitavtec.com | [email protected]
ECONOMY
y Energy saving – cost efficient, environmental friendly
thermostat
°F
y 5-1-1 programmable; 4 periods per day, each with Set
Heat and Set Cool
y IR remote control - option (programmable)
PROG
y Backlight display on LCD
TIMER
y Offset – for temperature reading adjustment
EXT.
SENSOR
OPTION
On/Off Thermostats - Programmable
CTR-24-SUPER
Wall mount, 24VAC thermostat, programmable, with
AC
an extra connection for an IR for a remote control
from a second location
The CTR-24-SUPER thermostat offers a selectable number of
heating and cooling stages for Heat Pump or Heat/Cool
HEAT
systems.
The CTR-24-SUPER enables connection of an extra IR receiver
ECONOMY
panel for remote control from a second location.
In addition, it offers an alarm output, a fault input and also
indicates outdoor temperature.
With built-in weekly programming (where set Cool, set Heat
AUTO
CHANGE-OVER
may be programmed), the CTR-24-SUPER is a convenient,
temperature control solution.
HP/HC
°C
Features
y Main supply- 24VAC
y Energy saving – cost efficient, environmental
°F
RT03
friendly thermostat
y DIP switch selectable configurations:
y Multiple stages for Cooling and Heating –
* Heat/Cool or Heat Pump system
up to 3 cooling stages and 3 Heating stages
* Electric or Oil/Gas heat system
y Alarm
* Heat Pump in Cool or Heat
output
–
24VAC
dry
contact,
TIMER
normally-open
* Temperature scale- °C or °F
y Fault Input– 24VAC
y 5-1-1programmable; 4 periods per day, each with Set
y External Temperature Sensor- option
Heat and Set Cool
y Outdoor temperature sensor- option
y Limit Cool and Heat set-point
PROG
y Extra IR receiver panel for remote control
Wiring diagram
Y1
Fault in (24VAC)
Y2
B/O
HU
W2
W1
W3
G1
FD
G2
AL
AL
RC
AUX
RH
T1
C
T1
14
T0
15
T0
16
Main input
24VAC
Return air sensor
Outdoor temp. sensor
External IR receiver (option)
www.meitavtec.com | [email protected]
2-9
On/Off Thermostats - Programmable
BDIR-24-SUPER-PROG
Wall-mount, 24VAC thermostat,
AC
with 5-1-1 USA-type Weekly Program built-in,
operable via Remote Control only.
The BDIR-24-Super is a stylish thermostat, ideally
HP/HC
suitable for commercial applications, as it is
operable via IR remote control only.
It can control a large variety of HVAC systems with
either Heat/Cool or Heat Pump configurations and
offers a selectable number of heating and cooling
stages.
Its 5-1-1 program, with 4 periods (Set
Cool/Set Heat) per day, is easy to use and can
provide 24-hour comfort as well as energy savings.
ECONOMY
Overall, the BDIR-24-SUPER-PROG is an attractive,
°C
wall mount thermostat with a large, easy to read
°F
display.
PROG
Features
y Wall-mount, 24VAC thermostat
y 5-1-1 programmable; 4 periods per day, each with Set
Heat and Set Cool
y DIP switch selectable configurations:
*
*
*
*
y Operable via IR Remote Control only
Heat/Cool or Heat Pump system
Electric or Oil/Gas heat system
Heat Pump in Cool or Heat
°F or °C temperature scales
y 2 set points (Cool & Heat)for auto-change-over
y External Temperature Sensor- option
y Energy saving – cost efficient, environmental
friendly thermostat
y
Wiring diagram
Models
Cooling
Stages
Heating
Stages
Speeds
BDIR-24-HC11-1S
1
1
1
BDIR-24-HC22-1S
2
2
1
BDIR-24-HP21-1S
1
2
1
2
3
1
ALL-INONE
ALL-INONE
1
Model
BDIR-24-HP32-1S
BDIR-24-SUPER
2-10
www.meitavtec.com | [email protected]
RT04
On/Off Thermostats - Programmable - Voice & Phone
CEO-24-HC22
“Talking
Thermostat”
with
telephone
&
voice
AC
capabilities, “call-out” options and 5-1-1 weekly
programmable. Perfect for controlling temperature
in second home
COOL
The CEO-24-HC22 thermostat brings you the state of the art
technology
in
capabilities.
It
thermostat
is
the
with
perfect
telephone
choice
for
and
voice
HEAT
controlling
temperature in your second home, cabin, condo or office
from a remote location.
Want to Heat up or Cool down your vacation home before
°C
you arrive while you are on the way? Forgot to change
mode and left home? Call your CEO-24-HC22 thermostat
°F
and receive verbal information on actual temperature and thermostat settings to change them. Not only that but, the
CEO-24-HC22 will call you in case of an alarm situation to enable you change set point, mode or turn the system off.
AUTO FAN
This unique thermostat offers also 5-1-1 weekly programming, so together with its built-in communication, alarm
activation in case of reaching Cool /Heat limits and further remarkable qualities, the CEO-24-HC22 is the ultimate
thermostat to give you peace of mind!
Features
y Main supply- 24VAC
y Telephone communication:
* thermostat calls-out to user in case of alarm
situation
* up to 3 numbers can be programmed to be called
in case of alarm
* thermostat re-dials every 2 minutes in case of busy
signal
* call thermostat from remote location to check or
set mode and temperature
y Modes: Cool /Heat / Auto-Change-Over/ Auto-fan /
Fan-On
y Economy mode – to be activated when you leave home
for any period of time
y Up to 2 stages of Heat and 2 stages of Cool
y Heat output- Electric or Oil/Gas jumper
selectable
y Selectable system configurationHeat Pump / Millivolt (dry contact)
y Internal / External sensor- jumper selectable
y 4 minutes compressor delay – jumper selectable
y Clock mode – 24 hours / 12 hours (AM/PM) –
TIMER
jumper selectable
y General purpose output (e.g. boiler) – to be
PROG
activated also by telephone for unlimited time
y External Temperature Sensor- option
y °C or °F Temperature display
y Real Time Clock
y 5-1-1 weekly program
Wiring diagram
www.meitavtec.com | [email protected]
2-11
On/Off Thermostats - Programmable - Voice & Phone
CEM-24-SUPER
“Talking Thermostat” with telephone and voice
options, and 5-1-1 weekly programmable, perfect
for controlling temperature in second home
The CEM-24-SUPER thermostat brings you the state of the
art technology in thermostat with telephone and voice
capabilities. It is the perfect choice for controlling
temperature in your second home, cabin, condo or office
from a remote location.
Want to Heat up or Cool down your vacation home before
you arrive while you are on the way? Forgot to change
mode and left home? Call your CEM-24-SUPER thermostat
and receive verbal information on actual temperature and
thermostat settings and command to raise or lower
temperature, change mode or turn the system on or off.
This unique thermostat offers also 5-1-1 weekly
programming, so together with its built-in telephone
capability,
COOL
HEAT
°C
alarm activation in case of reaching Cool /Heat limits and further remarkable qualities, the CEM-24-SUPER is the
ultimate thermostat to give you peace of mind!
Features
y Main supply- 24VAC
y Selectable system configuration-
y Telephone communication – Call thermostat and
listen to information on temperature settings, or
set mode and temperature from a remote
location through telephone
y Alarm activated when temperature reaches preset high or low limit, or when fault input is active
– indicated by red LED
y 5-1-1 weekly program
FAULT
INPUT
Heat-Cool / Heat Pump / Millivolt (dry contact)
y Up to 2 stages of Heat & 2 stages of Cool
AUTO
CHANGE-OVER
y Heat output- Electric or Oil/Gas - jumper selectable
y Heat Pump in Cool /Heat – jumper selectable
ALARM
y Internal / External Temperature Sensor - jumper
selectable
ECONOMY
y General purpose output (e.g. boiler) – to be activated
y Modes: Cool /Heat /Auto-Change-Over /Auto-fan
/Fan-On
y Economy mode – to be activated when you leave
home for any period of time
www.meitavtec.com | [email protected]
Fan
Compressor 1
Heat element 2
Compressor 2
Wiring diagram
2-12
°F
also by telephone for a un/limited time
y Large, easy to read display
PROG
On/Off Thermostats - Programmable - Voice & Phone
CEV-24-SUPER
Wall-mount,
24VAC
thermostat
loudspeaker,
especially
with
designed
for
built
in
AC
visually-
impaired individuals.
COOL
The CEV-24-SUPER brings the latest technology in room
temperature control and is perfectly suitable for residential
HEAT
and commercial applications.
With voice option and built-in speakers, the CEV-24-SUPER
is ideal for visually impaired individuals. Pressing the
command buttons activates the voice, which guides the user
to change mode, set point, etc. Available in C° or F° scale.
°C
With the CEV-24-SUPER, climate control becomes accessible
°F
to everyone in a simple, user-friendly way.
ALARM
Features
y Main supply- 24VAC
y Up to 2 stages of Heat and 2 stages of Cool
y Built-in speakers and voice option- thermostat speaks to
y Selectable Heat output- Electric or Oil/Gas
user allowing him to:
HP/HC
(jumper selectable)
* Turn On/Off thermostat
y Celsius or Fahrenheit temperature scale
* Verify & change mode
y External Temperature Sensor - option
* Verify & change set point
EXT.
SENSOR
OPTION
y Outdoor sensor- option
* Verify indoor & outdoor temp.
PROG
y Alarm indication output
* Verify time of day
y Ideal for visually-impaired individuals
y Fault input, 24VAC
y Heat/Cool or Heat Pump - selectable
y 5-1-1 weekly program
y Energy Saving – cost efficient, Environmental Friendly
y Economy mode (set-back/unoccupied mode)
logic built-in
Wiring diagram
Models
Model
Cool
Heat
Speeds
CEV-24-HC11
1
1
1
Heat element 1 / Heat pump
W1
CEV-24-HC22
2
2
1
Fan
G1
Compressor 1
Y1
Heat element 2
W2
Compressor 2
Y2
CEV-24-HC21
CEV-24-SUPER (all in oneHC11, HC22, HC21)
1
2
1
1 or 2
1 or 2
1
AL
Alarm indication
AL
AX
Fault input from system
RC
Return air sensor
0
RH
Q2
T1
C
Main input
24VAC
www.meitavtec.com | [email protected]
2-13
Proportional Thermostats 0-10V
ETN-24-P/PD-FC-SUPER2
Wall mount, 24VAC thermostat, for all Fan Coil
Proportional valve applications.
The
ETN-24-P/PD-FC-SUPER2
is
a
fully
featured,
advanced thermostat suitable for light commercial,
residential or apartment systems to control a wide array
of Fan Coil applications.
This superior thermostat offers various configurations
HEAT
according to customer's requirements, applicable by DIP
1/2/3
switches. It suggests 2 separate proportional outputs for
SPEEDS
Cool & Heat for 4-pipe Fan Coil systems, or a single
proportional output for both Cool & Heat for 2-pipe
systems. In addition, it has an option for 1, 2 or 3 fan
speeds as well as an option for an Auto-change-over and
an external sensor. Suitable for Wholesalers to keep a
stock on the shelf and supply the proper configuration
according to customer's specifications.
All these qualities make the ETN-24-P/PD-FC-SUPER2
°C
a superior, flexible solution for easy temperature control.
Features
Wiring diagram
°F
RT03
y Wall mount , 24VAC thermostat
y 1 or 2 proportional (0-10V or 2-10) output for
TIMER
Cool & Heat – DIP switch selectable
y 1,2 or 3 fan speeds – DIP switch selectable
y Auto-change-over mode by T2 water sensor
y Auto Fan Speed
y External Temperature Sensor – optional
y Energy saving – cost efficient, environmental friendly
thermostat
y Celsius or Fahrenheit temperature scales –
DIP switch selectable
y Daily, digital Timer – optimal when you are asleep or away
y Set point limits
y Temp Reading Offset – -5°..0..+5°
y Silicon rubber buttons
y IR option
www.meitavtec.com | [email protected]
3-1
Proportional Thermostats 0-10V
ETN24-PH-FC-SUPER
Wall-mount, 24VAC thermostat, with
proportional output for Cool (0-10VDC), onoff output for Heat. Suitable for Cool/Heat or
Cool Only applications
The ETN24-PH-FC-SUPER is an advanced, energy
saving thermostat suitable for light commercial,
residential or apartment systems to control
Cool/Heat or Cool Only, Fan Coil applications.
HEAT
This thermostat offers various configurations, either
Cool/Heat/Auto, Cool/Heat/Fan, or alternatively Cool
Only, all of which are selectable with 1, 2 or 3 fan
speed control. For Cool/Heat applications, it allows
1/2/3
SPEEDS
proportional output (0-10VDC) for Cool and On/Off output for Heat, while for Cool Only, it enables only
1 proportional output for Cool. In addition, it offers Economy mode for maximum energy saving.
All these qualities make the ETN24-PH-FC-SUPER suitable for wholesalers, keeping a stock on the shelf and
supplying the proper configuration according to customer's specifications.
AUTO
CHANGE-OVER
°C
Features
y Wall mount, 24VAC thermostat
y Fan Only
y 1 proportional output for Cool (0-10VDC) and
y Lock buttons - option
1 on-off output for Heat
y
y Modes: Cool/Heat/Auto, Cool/Heat/Fan, Cool Only
Energy saving – cost efficient, environmental
y Celsius or Fahrenheit temperature scales
y Economy mode
y IR option
y Window contact, normally open / normally closed –
y Set point limits - 10°..30° C (50..86°F) +set points
for Economy mode
y Internal / external sensor – DIP switch selectable
y Temp. offset – +5°C
y Auto-fan
Models
Heater
Electric
Oil / Gas
3-2
Wiring
diagram
Mode
Fan Speed
Cool, Fan Only
1/2/3
Cool, Heat, Fan Only
1/2/3
Cool, Heat, Auto, Fan Only
1/2/3
Cool, Fan Only
1/2/3
Cool, Heat, Fan Only
1/2/3
Cool, Heat, Auto, Fan Only
1/2/3
www.meitavtec.com | [email protected]
LOCK OPT.
EXT.
SENSOR
OPTION
friendly thermostat
y 1, 2 or 3 fan speeds + Auto speed
DIP switch selectable
°F
RT03
Proportional Thermostats 0-10V
FMH-24-P-1S
Flush-mount 24VAC Thermostat, with 2 separate
FC
proportional outputs for Cool & Heat (0-10VDC) and
1 fan speed.
COOL
The FMH-24-P-1S is a fully featured thermostat suitable for
light commercial, residential or apartment applications. It
HEAT
has 2 proportional outputs for Cool and Heat (0-10VDC)
0-10V
and 1 fan speed. It is a smart looking, flush mount
OUTPUT
thermostat, with a soft aesthetic shape and a large, easy to
read LCD display.
Features
ECONOMY
y Flush-mount, 24VAC thermostat
y Modes: Cool / Heat / Auto / Fan
y 2 separate proportional outputs for Cool and Heat
y Temperatures Limit – optional
(0-10V or 2-10V)
y 1 fan speed
y Hand held remote control – optional
y Temperature reading offset – optional ± 6°
y 12-h Timer (using Remote Control)
TIMER
°C
y Silicon rubber key pads
y Large, easy to read display
y Simple & friendly setting
y Energy saving – cost efficient, environmental friendly
thermostat
Wiring diagram
www.meitavtec.com | [email protected]
3-3
Proportional Thermostats 0-10V
FMH-24-PD-1S
Flush-mount, 24VAC thermostat, with a single
proportional output for both Cool and Heat
and 1 fan speed.
0-10V
OUTPUT
The FMH-24-PD-1S is a fully featured, easy to
operate thermostat suitable for light commercial and
COOL
residential applications. It offers 1 proportional
output for both Cool and Heat (0-10VDC or 2-
HEAT
10VDC) and 1 fan speed.
It is an attractive, flush mount thermostat, with a
large and easy to read display.
ECONOMY
Features
y Flush-mount, 24VAC thermostat
y Modes: Cool / Heat / Fan
y 1 proportional output for both Cool and Heat
y Large & easy to read display
y 0-10VDC or 2-10VDC proportional output
y Silicon rubber key pads
y 1 fan speed
y Simple & friendly setting
Wiring diagram
3-4
www.meitavtec.com | [email protected]
°C
Proportional Thermostats 0-10V
FMT-24-PD-3S
Flush-mount, 24VAC thermostat, with a single
proportional output for both Cool & Heat and
3 fan speeds.
The FMT-24-PD-3S is a fully featured, stylish thermostat
suitable for light commercial, residential or apartment,
2-pipe fan coil applications. It offers 1 proportional
HEAT
output for both Cool and Heat (0-10VDC or 2-10VDC)
and 3 fan speeds.
The FMT-24-PD-3S is a smart looking, flush mount
thermostat, with a soft aesthetic shape and a large,
ECONOMY
easy to read LCD.
EXT.
SENSOR
OPTION
Features
y Flush-mount, 24VAC thermostat
y Modes: Cool /Heat /Fan Only
y 1 proportional output for both Cool and Heat
y Large & easy to read display
y 3 fan speeds + auto speed
y Silicon rubber key pads
y External Temperature Sensor – optional
y Simple & friendly setting
°C
Wiring diagram
External sensor
(option)
T
To
R
Main Input 24VAC
C
HI
High
ME
Medium
LO
Low
Fan (0.5A)
Y
Proportional output for cool and heat 0-10VDC
0
W
Not in use
www.meitavtec.com | [email protected]
3-5
Proportional Thermostats 0-10V
ETN-24-P-1S (Cool Only)
VAV
Wall-mount thermostat for VAV applications,
with 1 proportional output (0÷10VDC) for
Cool only
The ETN-24-P-1S (Cool Only) thermostat is a fully
0-10V
featured and stylish thermostat suitable for light
OUTPUT
commercial, residential or apartment applications.
COOL
This thermostat has proportional output for Cool (010VDC or 2-10 VDC), large, easy to read display
and a hand held remote control.
TIMER
Features
y Wall mount, 24VAC thermostat
y 1 proportional output for Cool (0-10V or 2-10V)
y External Temperature Sensor - Option
y Differential - Adjustable for 0–10 VDC
y Offset temperature reading - Adjustable
y Temperature limit range (10°C…30°C, 50°F…86°F)
y Two different scales: Fahrenheit or Celsius
y Lock buttons option
°C
°F
EXT.
SENSOR
OPTION
y Hand Held Remote Control – Option
LOCK OPT.
y Energy saving – cost efficient, environmental
friendly logic
RT03
Wiring diagram
0
Proportional output for cool (0-10VDC)
Y
T
External sensor
To
G
Fan (24VAC, 0.5A)
C
Main Input 24VAC
R
3-6
www.meitavtec.com | [email protected]
Proportional Thermostats 0-10V
TED-24-P-3S (FAN 230 VAC)
Wall-mount, 24VAC thermostat, with 2 proportional
outputs for Cool and Heat (0-10V) and 3 fan speeds
(230VAC).
The TED-24-P-3S is an attractive, fully featured thermostat
suitable for light commercial, residential or apartment
applications. It has two proportional outputs for Cool and
Heat and 3 fan speeds.
HEAT
All these qualities make the TED-24-P-3S the perfect
solution for basic and easy climate control.
Features
ECONOMY
y Wall-mount, 24 VAC Thermostat
°C
y 2 proportional outputs (0-10 VDC) for Cool & Heat
EXT.
SENSOR
OPTION
y 3 fan speeds - 230 VAC outputs (using 220V feed)
y External Temperature Sensor – option
y Energy saving – cost efficient, environmental friendly
thermostat
y Simple & friendly setting
Wiring diagram
External sensor
(option)
T
T
Y
Cool valve 0-10VDC
W
Heat valve 0-10VDC
R
Main Input 24VAC
C
R
C
230VAC Input (common for fan)
~
HI
Fan high
ME
Fan medium
LO
Fan low
Fan (0.5A)
www.meitavtec.com | [email protected]
3-7
Proportional Thermostats 0-10V
TED-24-P-3S-Cool Only (FAN 230 VAC)
Wall-mount, 24VAC thermostat,
with 1 proportional output for Cool only
(0-10V) and 3 fan speeds (230VAC)
The TED-24-P-3S-Cool Only is a fully featured, easy
to operate thermostat suitable for light commercial,
residential or apartment applications. It has one
proportional output for Cool Only and 3 fan speed
outputs, 230 VAC.
It is an attractive, wall mount thermostat, with a
large easy to read display.
°C
Features
y Wall-mount, 24VAC thermostat
y Simple & friendly setting
y 1 proportional output (0-10 VDC) for Cool
y Large, clear LCD display
y 3 fan speeds
y Energy saving – cost efficient,
environmental friendly thermostat
y Fan - 230 VAC power supply
y External Temperature Sensor - optional
Wiring diagram
External sensor
(option)
T
T
Y
Cool valve 0-10VDC
W
R
Main Input 24VAC
C
230VAC Input (common for fan)
~
3-8
HI
Fan high
ME
Fan medium
LO
Fan low
Fan (0.5A)
www.meitavtec.com | [email protected]
R
C
EXT.
SENSOR
OPTION
Proportional Thermostats - 3 wires
ETN-24-PM2 series
Wall-mount, 24VAC thermostat with 2 separate
FC
proportional outputs for Cool & Heat (3-wire)
and 1 or 3-fan speeds
COOL
The ETN-24-PM2 Series is suitable for light commercial or
residential applications. It offers 2 proportional outputs
HEAT
(3-wire) for Cool & Heat valves and 1 speed or 3 speeds,
24VAC fan.
AUTO FAN
3-WIRE
OUTPUT
The ETN-24-PM2 is an attractive thermostat with a large,
easy to read, display.
ECONOMY
Features
y Wall mount, 24VAC thermostat
y Auto speed
y 2 Proportional and Integral outputs (3-wire)
y Offset - ±6°C
for Cool & Heat
y Adjustable Open/Close time for motor
(10 to 400 seconds)
AUTO
CHANGE-OVER
EXT.
SENSOR
OPTION
y Set point temp. – 10…30°C
y Auto-fan
y Energy saving – cost efficient, environmental
y Modes - Cool / Heat / Auto
y External / Internal sensor – DIP switch selectable
friendly thermostat
Models
Model
Fan Speeds
ETN-24-PM2-1S
1
ETN-24-PM2-3S
3
Wiring diagram
www.meitavtec.com | [email protected]
3-9
Proportional Thermostats - 3 wires
ETN-24-PMHP
Wall mount, 24 VAC thermostat, for 2-pipe
FC
systems, with 1 proportional output (3-wire,
24VAC) for Heat and a compressor with Heat
Pump output for Cool
The ETN-24-PMHP is well suited for commercial or
°C
residential applications.
°F
It offers 1 proportional output (3-wire, 24VAC) for
Heat and a compressor with Heat Pump output for
COOL
Cool. It is suitable for 2-pipe systems only and has 1
fan speed or 2 fan speeds, 24 VAC.
The ETN-24-PMHP is an attractive thermostat, with a
3-WIRE
OUTPUT
large, easy to read display.
Features
RT03
y Wall mount – 24VAC thermostat
y 1 or 2 fan speed
y Adjustable Open/Close time for motor (10 to 250
y Two Temp. scales: Fahrenheit or Celsius
ECONOMY
seconds)
y 1 Proportional and Integral output (24VAC) ,
3 wire, for Heat
y Heat second stage using Compressor W/WO
Heat Pump
y Cool output, Compressor W/WO Heat Pump
Wiring diagram
3-10
www.meitavtec.com | [email protected]
y External Temperature Sensor - Option
y Lock buttons option
y Energy saving – cost efficient, environmental friendly
thermostat IR remote control option
EXT.
SENSOR
OPTION
Proportional Thermostats - 3 wires
ETN-24-P/PM-1S (Cool Only)
Wall mount, 24VAC thermostat, with 0-10VDC
VAV
output for Cool and 3-wire output for damper
control
0-10V
OUTPUT
The ETN-24-P/PM-1S (Cool Only) thermostat is a fully
featured
and
stylish
thermostat
suitable
for
light
COOL
commercial, residential or apartment applications.
ECONOMY
It offers a proportional output for Cool (0-10VDC) as well
1
as another 3-wire proportional output, ideal for dampers.
SPEED
°C
The ETN-24-P/PM-1S (Cool Only) is an attractive, stylish
thermostat with a large, easy to read display and an
°F
3-WIRE
OUTPUT
optional IR remote control.
EXT.
SENSOR
OPTION
Features
y Wall mount, 24VAC thermostat
y Lock buttons
y 0÷10V or 2÷10V Cool Output
y Two Temp. scales: Fahrenheit or Celsius
y 3 Wire, proportional output– Open / Close, time adjustable
y External Temperature Sensor - Option
y Differential - adjustable for 0÷10 VDC
y Offset for temperature reading adjustment
y Display for set temperature only – selectable by DIP switch
y Hand Held Remote Control – Option
LOCK OPT.
position
y Energy saving – cost efficient, Environmental Friendly
algorithm
Wiring diagram
www.meitavtec.com | [email protected]
3-11
Proportional Thermostats - 3 wires
ETN-24-PMH series
Wall mount, 24 VAC thermostat, for 2-pipe
systems, with 1 proportional output (3-wire,
24VAC) for Cool and an on/off output for Heat
COOL
The ETN-24-PMH Series is well suited for commercial
or residential applications.
HEAT
It offers 1 proportional output (3-wire, 24VAC) for
1/3
Cool and an on/off output for Heat. It is suitable for
SPEEDS
2-pipe systems only and has 1 fan speed or 3 fan
speeds, 24 VAC.
The ETN-24-PMH is an attractive thermostat, with a
3-WIRE
OUTPUT
large, easy to read display.
Features
RT03
y Wall mount – 24VAC thermostat
y 1 or 3 fan speed control (DIP Switch selectable)
y Proportional and Integral output, 3 wire (24VAC)
y Fan Off delay after Electric heater operation
ECONOMY
for Cool
y Energy saving – cost efficient, environmental friendly
y Adjustable Open/Close time for motor (10 to 400
seconds)
thermostat IR
y remote control option
y Heat output (on/off relay) - 24 VAC
y Auto speed (only in 3 speed model)
y Heater type – Electric or Oil (DIP Switch
y Auto fan – selectable
selectable)
y On/Off or Start/Stop configuration - selectable
y Temperature limits for Cool and Heat
Wiring diagram
OP
Open
CL
Common
COM
Proportional output
for Cool (3-wire)
Close
C
Main Input 24VAC
R
3-12
W1
Heat (0.5A)
G
Fan (0.5A)
www.meitavtec.com | [email protected]
Humidity Controllers
CHU-24-SUPER
Wall-mount, 24 VAC thermostat, for controlling
AC
Temperature & Humidity, weekly programmable
The CHU-24-SUPER thermostat is a combined Temperature
COOL
& Humidity controller.
It offers a selectable number of heating and cooling stages
as well as an output for humidifier or de-humidifier. The
CHU-24-SUPER has a built-in humidity sensor, which allows
adjustment of a Humidity Set Point.
It also offers weekly programming (where set Cool, set Heat
and set Humidity may be programmed) and alarm indication
in case temperature or humidity limits are exceeded.
ALARM
Features
y Main supply- 24VAC
y System configuration- Heat Pump or Heat/Cool (jumper
selectable)
y Multiple stages for Cooling & Heating
y Output for Humidifier or De-Humidifier (jumper
selectable)- 24VAC
y Humidity sensor built-in (0-10VDC)
y Adjustable Heat configuration; Electric or Oil/Gas system
(jumper selectable)
y Energy
saving
–
cost
efficient,
PROG
environmental friendly thermostat
y 5-1-1 weekly program with programmable
TIMER
set Cool, set Heat and Set Humidity
y Re-heat function in humidity logic
y Alarm output (24VAC) Indication in case
temperature or humidity limits are exceeded
y Adjustable temperature set point range 5°C - 35°C
y Adjustable humidity set point range 20%-70% RH
Wiring diagram
www.meitavtec.com | [email protected]
4-1
Humidity Controllers
ERHU-55
Wall-mount, 12VDC Humidity Controller for
de-humidification only.
HUMIDITY
The ERHU-55 is a Humidity controller with a built-in
humidity sensor and an output for de-humidification via a
compressor.
The ERHU-55 allows users to adjust Humidity Set Point
and the desired fan speed. The main input and outputs are
12VDC, and therefore the ERHU-55 must be used with
power supply PS102.
Features
y Main supply – 12VDC
y Adjustable humidity set point
y On/Off output for De-Humidification (via compressor)
y 3 Fan speeds- manually
y Humidity sensor built-in
Wiring diagram
4-2
www.meitavtec.com | [email protected]
adjustable
Humidity Controllers
DEH-2000
HUMIDITY
Wall-mount, 24VAC, humidity ONLY controller with
°C
Fresh Air Damper output and weekly program
built-in.
°F
The DEH-2000 has a built-in humidity sensor, which allows
adjustment of a HUMIDITY SET POINT. It offers a
DAMPER
CONTROL
humidifier and de-humidifier output (24VAC) as well as a
weekly program for the operation of Fresh Air Damper.
COMPRESSOR
DELAY
PROG
Features
y Main supply- 24VAC
y On/Off output for Humidifier- 24VAC
y On/Off output for De-Humidifier- 24VAC
y Output for Fresh Air Damper
y Humidity sensor built-in
y Display of T-ambient in °C or °F
y 5-1-1 weekly program (4 x start/stop)
for Fresh Air Damper operation
y Fan always runs when ventilation occurs
(FAD open), even if Fan has been set to “Off”
y Re-heat function in humidity logic
y Adjustable humidity set point range- 20%-90%
y Energy saving – cost efficient, environmental friendly
thermostat
Wiring diagram
www.meitavtec.com | [email protected]
4-3
Humidity Controllers
ETN-24-P-3S-HU
Wall-mount, 24VAC, temperature and humidity
AC
controller (de-humidification only), with
proportional integral outputs for Cool and Heat
COOL
It offers 2 separate Proportional Integral (0-10VDC)
outputs and 3 Fan Speeds; one output for Cool &
De-Humidification and another for Heat. With inputs
for external temperature and humidity sensors, the
ETN-24-P-3S-HU allows the user to adjust both
Temperature and Humidity set points.
ECONOMY
Features
y Wall mount, 24VAC thermostat
y Energy saving – cost efficient, environmental friendly
y 2 separate Proportional Integral (0-10VDC)
thermostat
y Input for external humidity sensor
outputs:
* Cool and Dehumidification
(0-10VDC)
* Heat
y Humidity set point range- 40%-70% RH
y 2 adjustable set points; temperature and humidity
y Auto-Changeover mode
y Works with Meitav-tec’s GHU sensor- combined
temperature & humidity sensor for room or duct
y Input for external temperature sensor
y Re-heat function in humidity logic (only in AutoChangeover mode)
Wiring diagram
0
W
0
Y
T
To
Proportional output
for Heat (0-10V)
Proportional output
for Cool (0-10V)
External sensor
(option)
HU
Humidity sensor
0
G3
High
G2
Medium
G1
Low
Fan (0.5A)
C
Main Input 24VAC
R
4-4
www.meitavtec.com | [email protected]
EXT.
SENSOR
OPTION
Humidity Controllers
M5003-24VAC/12VDC
AC
Wall mount, 24VAC or 12VDC controller for
Temperature & Humidity
COOL
The M5003 thermostat is a combined Temperature &
Humidity controller, available in either 24VAC or 12VDC.
The M5003 offers a selectable number of heating and
cooling stages as well as 2 outputs for Humidifier and DeHumidifier. The M5003 allows adjustment of Humidity & DeHumidity set points and also offers weekly programming.
HUMIDITY
Features
y Main supply- 24VAC or 12VDC
y Multiple stages for Cooling and Heating (up to 2
stages of Heat and 2 stages of Cool)
y Energy saving – cost efficient, environmental
friendly controller
y Adjustable Heat configuration; Electric or
°C
Oil/Gas system (jumper selectable)
y Output for Humidifier
PROG
y Output for De-humidifier
y 2 separate set points for humidification and dehumidification
y Input for external temperature sensor
y Input for external humidity sensor (0-10VDC)
y 5-1-1 weekly program with programmable
temperature set point, humidity set point and
EXT.
SENSOR
OPTION
de-humidity set point
y Re-heat function in humidity logic
y Works with Meitav-tec’s GHU sensor- combined
temperature and humidity sensor for room or
M5003-24VAC
24VAC
Fan (0.5A)
12VDC
Humidifier (0.5A)
M5003-12VDC
Heat element 2 (0.5A)
Voltage
Heat element 1 (0.5A)
Model
Compressor 1 (0.5A)
(Cool / De-hum)
Models
Compressor 2 (0.5A)
duct
Wiring diagram
www.meitavtec.com | [email protected]
4-5
Humidity Controllers
M5001-24-4X0-10VDC
HUMIDITY
Wall mount, 24VAC controller for Temperature
& Humidity
COOL
The M5001-24-4X0-10VDC controller is a multipurpose display controller. It offers unique flexibility
0-10V
and simplicity, allowing users proportional control of
OUTPUT
both temperature and humidity.
The M5001-24-4X0-10VDC offers 4 different
ECONOMY
proportional outputs; Cool, Heat, Humidifier and De-
°C
humidifier. Additional features such as wide
temperature and humidity ranges, adjustable
differentials and adjustable dead-zones, make the
M5001-24-4X0-10VDC a truly unique and practical
controller.
Features
y Wall mount, 24VAC controller
y Range temperature from 0°C-60°C
y Range humidity from 10%-99% RH
y Separate Proportional Cool & Heat outputs
(0-10VDC or 2-10VDC)
y Separate Proportional Humidifier and DeHumidifier outputs (0-10VDC or 2-10VDC)
y Adjustable temperature differential (0.5°C1.5°C) and dead-zone (0.5°C-2.5°C)
Wiring diagram
4-6
www.meitavtec.com | [email protected]
y Adjustable humidity differential (0.5%-3.0% RH) and
dead-zone (0.5%-5.0% RH)
y Automatic operation
y Works with Meitav-tec’s GHU sensor- combined
temperature and humidity sensor for room or duct
Fan Coil Stand Alone Controllers
FMH-FC-SUPER3
Flush-Mount, 230VAC or 110VAC Thermostat for all
Fan Coil applications, with special input.
FC
The FMH-FC-SUPER3 series allows users the flexibility of
having one main controller for most Fan Coil applications.
It can be flush-mounted or installed directly into the Fan
Coil, with an external sensor for the return air.
COOL
HEAT
The FMH-FC-SUPER3 also offers a special input for 1 of 4
options:
1- Auto-change over sensor, where the incoming water
temperature dictates the Mode.
2- Contact input for a remote switch, which changes the
Mode of one or many thermostats linked together.
3- Contact input for a remote switch, which activates
Economy mode.
4- Contact input to Turn OFF units.
AUTO FAN
RT03
Features
y Flush-Mount, 230VAC or 110VAC, Thermostat
ECONOMY
y Special Input for:
* Auto-change over sensor - mode is set
y Can be connected to:
* 4 pipe system – 2 valves
* 2 pipe system – 1 valve
* Fan Coil – no valve
AUTO
CHANGE-OVER
based on temperature of the incoming
water flow, ideal for 2-pipe systems.
* Contact input for a remote switch, which
sets the mode of one or more
y DIP switch control options:
thermostats linked together (available
* Manual Cool/Heat or Auto-Change
* Display for set temperatures only
only for 2-pipe systems).
LOCK OPT.
* Contact input to activate Economy Mode
* Fan/Auto Fan or all time Auto Fan – selectable
- unit reverts to pre-determined economy
* Internal / External sensor
set points
y Lock buttons – password protected
y Set point limits – password protected
* Contact input to turn the unit Off
y Energy
saving
–
cost
efficient,
environmental friendly thermostat
y Unit ‘On’ ‘Off’ Timer’
y Available in different colors
Wiring diagram
Models
FMH-220-FC-Super3
220VAC
FMH-110-FC-Super3
110VAC
www.meitavtec.com | [email protected]
5-1
Fan Coil Stand Alone Controllers
FMH220-P-FC-SUPER
FC
Flush-mount, 220VAC thermostat, with 0-10V
proportional outputs for Fan-Coil valves and 3 Fan
speeds
COOL
The FMH220-P-FC-SUPER is a highly versatile thermostat for
Fan Coil applications. With numerous configuration options,
HEAT
it is an ideal solution for wholesalers to keep on stock and
supply the proper configuration according to customer's
ECONOMY
specifications.
0-10V
OUTPUT
This superior, energy saving thermostat offers 2 proportional outputs for Cool & Heat, with a configurable,
proportional opening. It also enables choosing various configuration options using DIP switches, to suit to
1/3
SPEEDS
customer's requirements. For example, seller can configure it to a 2-Pipe or a 4-Pipe application, with or without
Auto-Change-Over mode, 1 or 3 fan speeds, or alternatively, internal / external sensor. Other important features,
AUTO FAN
such as Economy mode, temperature offset, dead zone and set point limits are also adjustable.
This versatility makes the FMH220-P-FC-SUPER the ultimate choice for comfortable, easy temperature control for
AUTO
CHANGE-OVER
Fan-Coil.
Features
y Flush mount, 220VAC thermostat (available also in
110VAC model)
temp. only – DIP switch selectable
y Applicable for various Fan Coil applications: 2 pipe / 4
pipe – DIP switch selectable
y Internal / External Temperature Sensor – DIP
(configurable, proportional opening -0-10V)
y Auto change over sensor or contact input – DIP switch
selectable
y Hand held remote control – option
LOCK OPT.
y Timer – ideal when you are asleep or away
y Adjustable set point limits - 10°…30°C
y Economy mode
y 1 or 3 fan speeds – DIP switch selectable
y With / without Auto-change-over mode – DIP switch
selectable
y Always Auto-Fan /Auto-Fan selectable – DIP switch
y Lock buttons – option
y Offset – adjustable
y Beeping pushbuttons - optional
Fan (3A)
Wiring diagram
3
2
1
L
4-Pipe configuration
N
High voltage wires
W
(or)
2-Pipe configuration
(or)
No valve – fan only
Not connected
Heat valve
0
Y
Cool valve
One valve
Not connected
T2
Contact input (remote switch) or Auto-change over sensor
0
External sensor (option)
T1
5-2
TIMER
switch selectable
y 2 separate proportional outputs for Cool and Heat
selectable
y Set point & room temp. display / set point
www.meitavtec.com | [email protected]
°C
Fan Coil Stand Alone Controllers
MIGA1-FC-SUPER
Main Controller for Fan Coil applications, with
optional hand-held remote control +IR panel, or
wall or flush mount panels.
COOL
MIGA1-FC-SUPER is a main controller for various F/C
applications. Together with a wall or flush mount
HEAT
thermostat panel or receiver and a remote control - this
controller becomes highly attractive and an ideal 'general
purpose controller'.
MIGA1-FC-SUPER has a modular, user-friendly design
AUTO FAN
with various F/C applications built-in, field selectable.
This modularity allows you to have one main controller
for different F/C applications and suit it according to
customer’s needs on the spot.
Meitav-tec's best seller for years – highly reliable and
user friendly both for installers and customers.
FAULT
INPUT
Features
TIMER
RT03
Indoor coil sensor
Auto change over
sensor
Return air sensor
Cool (1A)
valves – jumper selectable
3 fan speeds
Wall or flush mount thermostats – option
Hand-Held Remote Control + IRP or
sticker panel – option
Swing motor output - dry contact
Pump output – active in Cool mode
Timer – Start/Stop, programmable from R.Control
Swing motor Output
(dry contact)
Medium
Wiring diagram
y
y
y
High
y
External fan (3A)
y
y
y
y
* 2 pipe systems
* 4 pipe systems
No valve systems
T1 – Return Air Sensor
Auto-Change Over sensor (for 2-pipes) T2<20°C – Cool, T2>20°C – Heat - Option
Indoor coil sensor - T3 >30°C – Fan starts
T3< 27°C Fan stops - Option
Fault input, dry contact – when contact opens, unit
turns off and warning, indications lights will flash
Heat (1A)
y
y
y
y Auto-Fan in Heat and Fan-On in Cool / Fan in no
Low
y Main Supply – 230VAC
y Various F/C application, jumper selectable:
www.meitavtec.com | [email protected]
5-3
Accessories for MIGA1
ETN-MIGA-IR
FC
User interface for MIGA1 main board, with IR option
AC
The ETN-MIG-IR is a convenient user-interface for the
MIGA1 main board. It is a wall mount, local control panel
with an infra-red receiver option, making it ideal for any
end-user.
The ETN-MIG-IR is a smart looking thermostat panel with a
soft aesthetic shape and a large, easy to read LCD display.
TIMER
RT03
Features
y Easy connection to MIGA1 main board (3 wires only!)
y Local Control of:
Friendly logic
* ON/OFF
y Large, easy to read display
* Mode
y Soft, silicon pushbuttons
* Fan Speed
*
ON/OFF Timer
Wiring diagram
5-4
y Energy Saving – cost efficient, Environmental
www.meitavtec.com | [email protected]
y Neutral, aesthetic color
Accessories for MIGA1
FMH-MIGA-IR
Flush mount, thermostat panel, serving as a
FC
user interface for Meitav-tec's MIGA1 main
board, with an IR receiver option.
The FMH-MIGA-IR is a flush mount, thermostat
panel, functioning as a user interface for MIGA1
HEAT
main board.
It is a convenient local control panel with an infrared receiver option, making it ideal for any end-user.
The FMH-MIGA-IR is a smart looking thermostat with
a soft aesthetic shape and a large, easy to read LCD
display.
Features
°C
y Flush mount, 12VDC thermostat
y 3 fan speeds + Auto
y Easy connection to MIGA1 main board (3 wire
y Temperature set point limits – 10…30°C
only!)
y Local Control of:
* On/Off
y IR option
y Real time clock and day
* Mode
y Large & easy to read display
* Set point temperature
y Silicon rubber key pads
* Fan Speed
y Modes: Cool / Heat /Auto /Fan only
y Simple & friendly setting
Wiring diagram
www.meitavtec.com | [email protected]
5-5
Accessories for MIGA1
M1P
IR Sticker Receiver Panel for MIGA1 main board
COOL
The M1P is a wall mount, infrared sticker receiver panel,
with a quick connector to MIGA1 main board.
HEAT
It can be locally controlled via its On/Off button, or via an
IR Remote Control (RT03).
TIMER
The M1P can be supplied with an 80cm extension cable
Features
y Easily connected to MIGA1 main board using a quick
y LED Indications:
connector
* ON/OFF
y Locally Controlled:
* Timer
* On/Off
* Power
y Remotely Controlled:
* On/Off
* Mode
* Heat/Cool
y Suitable for Meitav'tec's MIGA controllers
* Fan Speed
* On/Off Timer
M101P
Plastic Panel Receiver for MIGA1 main board
The M101P is a wall mount, infra-red receiver panel, with a
cable connector to MIGA1 main board.
HEAT
It can be locally controlled via its On/Off button, or via an
IR Remote Control (RT03).
AUTO FAN
Features
y Easily connected to MIGA1 main board
y Locally Controlled:
* On/Off
TIMER
y Remotely Controlled:
* On/Off
* Mode
y LED Indication for Fault / Alarm
* Fan Speed
y Suitable for Meitav-tec's MIGA controllers
*
Temperature set-point Auto-Fan
*
Timer
*
5-6
www.meitavtec.com | [email protected]
Real Time Clock
Fan Coil Stand Alone Controllers
FMH-FC-SUPER4
Flush-Mount, 230VAC or 110VAC Thermostat for all
Fan Coil applications, with a special contact input.
The FMH-FC-SUPER4 is a highly versatile thermostat
suitable for various Fan Coil applications. It can be flushmounted or installed directly into the Fan Coil, with an
external sensor for the return air and water temperature.
The FMH-FC-SUPER4 also offers several DIP Switch
selectable options to best suit customer's needs, e.g. AutoChange-Over sensor, Soft-start for fan or a Contact Input.
When the special contact input is selected, it allows 1 of 3 options:
1- Contact input for a remote switch, which changes the Mode of one or many thermostats linked.
2- Contact input for a remote switch that activates Economy mode.
3- Contact input to turn units off.
COOL
HEAT
ECONOMY
Features
y Flush-Mount, 230VAC or 110VAC, Thermostat
y Suitable to various Fan Coil systems:
y Special Contact Input (remote switch - close/ open) can be
set to work in one of the following modes:
* Mode selection – remote switch sets the mode
(Cool/Heat) to one or more thermostats linked
together (ideal for hotel bedrooms or offices).
* 4 pipe system – 2 valves
* 2 pipe system – 1 valve
* Fan Coil – no valve
y Modes: Cool, Heat, Auto, Fan Only
* Economy Mode - unit reverts to pre-defined
economy set points
y 3 fan speed control + Auto
* Contact input to turn the unit Off
y DIP switch control options:
AUTO
CHANGE-OVER
FAULT
INPUT
°C
y Soft-Start logic in Heat for the Fan – adjustable delay time
* Auto-Change-Over sensor & Fan SoftStart in Heat / Contact input
y T2 soft-start in Cool & Heat – adjustable temperature to
* Display of set temperatures only /
Display of set-point & room temp.
y Cool/Heat temp. Dead Zone setting
* Always Auto-Fan / Auto-Fan selectable
* With / without Auto-Change-Over mode
* Internal / External sensor
y Auto-change over sensor - mode is set based
on temperature of the incoming water flow,
ideal for 2-pipe systems.
start fan
y Energy saving – cost efficient, environmental friendly
thermostat
y Offset - ±6°C
y Lock buttons – option
y Set point limits – 10°…30°C
y Remote control– optional (RT03)
Wiring diagram
Models
Model
FMH-220-FC-Super4
FMH-110-FC-Super4
www.meitavtec.com | [email protected]
5-7
Fan Coil Controllers
MIGA AB
FC
MIGA AB enables control of multiple fan-coil
controllers, linked one to another, via a main
panel. Ideal for open space applications, where all
controllers need the same working parameters.
COOL
MIGA-AB controller is a smart, cost effective solution for
HEAT
multiple fan-coil control. ETN/MIGA AB master panel
allows control of up to 60 MIGA controllers, which need
COMM
the same working conditions. Each MIGA board controls
temperature according to the orders received from the
master ETN/MIGA AB, but works according to its local
ambient temperature, measured by its temperature
sensors.
AUTO FAN
It is, therefore, a great solution for open spaces, such as
banks, large stores and similar applications where one
set of parameters suits all fan-coil units.
MIGA AB, together with a wall or flush mount panel, is a
convenient, easy way to operate numerous fan coil
controllers.
Features
y Main Supply – 230VAC
y Optional panels for Master: Wall / flush-mount
y Various F/C applications, jumper selectable:
y Optional panels for slave: wall-mount, IR
y
y
y
y
y
y
y
* 2 pipe systems
receiver (can override the main panel command
* 4 pipe systems
(Last operation rules).
3 fan speed control
y Remote Control (RT03)
Modes: Cool, Heat, Auto, Fan Only
y Daily, Start-Stop timer (from remote control
Mode is selected from master panel to all boards
Communication to other MIGA boards
y Economy T-set in Cool & Heat – adjustable
T1 – Return Air Sensor
y Offset - ±6°C
T3- Soft-Start in Heat sensor
When T3 is not connected, Auto-Fan mode in Heat is
active, Auto-Fan in Cool is inactive
y Condensing Pump output
y Air Mixing algorithm in Heat (when set-point ambient temp.)
y DIP switch selectable options in
y Set point limits - 10°…30°C
y Dead Zone, adjustable - 1…5°C
y In 2-pipe systems, Aqua-Stat should be used
between the valve outputs and the valve
y DIP switch selectable options in
WP2500/MIG/WS panel:
ETN1000/MIGA/AB panel:
* On-Off / Start-Stop configuration
* Lock / Unlock panel buttons
* Read ambient Temp. from panel / MIGA
* On-Off / Start-Stop configuration
* T-set + T ambient Display / T-set display only
* Read ambient Temp. from panel / MIGA
* Standard work / Technician work
* T-set + T ambient Display / T-set display only
* Standard work / Technician work
5-8
only)
www.meitavtec.com | [email protected]
RT03
Fan Coil Controllers
MIGA AB
Wiring diagram
www.meitavtec.com | [email protected]
5-9
A/C Stand Alone Controllers
MIGA1-AC-SUPER
Main Controller for A/C applications, with optional
AC
hand-held remote control +IR panel, or wall or flush
mount panels.
COOL
MIGA1-AC-SUPER is a main controller for various A/C
applications. Together with a wall or flush mount thermostat
HEAT
panel or a receiver and a remote control - this controller
becomes highly attractive, an ideal 'general purpose
controller'.
MIGA1-AC-SUPER has a modular, user-friendly design with
AUTO FAN
various A/C applications built-in, field selectable. This
modularity allows you to have one main controller for
different A/C applications and suit it according to customer’s
needs on the spot.
Features
TIMER
y Main controller for multi AC applications
y 3 Fan speeds and Auto Speed
y Main Input- 230VAC
y Auto Fan – selectable
y Jumper selectable applications
y External fan output – option
y Wall or Flush mount thermostats, Sticker Panel
* Heat Pump (reversible)
°C
EXT.
SENSOR
OPTION
or IRP - option
* Heat-Cool
y External sensor – option
y IR remote control - option
y Return air sensor (T1)
y Timer – Start/Stop, programmable by remote
y Outdoor coil sensor (T2) option –in Heat mode, de-
control
y C° temperature display
icing
y Indoor coil sensor (T3) option – in Cool mode, de-icing
Low
Medium
High
External fan (3A)
Heat element /
Heat pump (1A)
Compressor (1A)
Wiring diagram
www.meitavtec.com | [email protected]
6-1
Maxinet – Thermostat Network
MCU
Master Control Unit for stand alone applications or
B.M.S
Maxinet Router for up to 60 thermostats
COMPATIBLE
The MCU is a Master Control Unit for stand-alone
COMM
applications to control up to 60 thermostats or software
applications. It is also applicable as a router for large
network applications in Maxinet B.M.S., or just for simple
divisions in installations such as floors or large buildings.
The MCU has an emergency weekly program that is
°C
activated automatically when the software is down. In
°F
addition, the MCU has a large display and pushbuttons to
view and change units in the network. It allows
broadcasting commands to all the units with a push of a
button.
Overall, the MCU offers features and solutions for the
modern HVAC BMS market.
Features
y View and change units in the network
y Easy to change each unit settings:
* Mode
y Emergency Weekly Program (EWP) , automatically
activated when software is down
y Weekly program for 7 days, with 2 times start-stop
* Fan speeds
time and set for each period when working as stand
* Set temperature
alone master
* Set temperature limit
* On/Off
y Energy Saving – cost efficient, Environmental
Friendly built-in logic
y Connect up to 12 MCUs to one Maxinet software
y DIP switch selection for stand alone or software
application
www.meitavtec.com | [email protected]
7-1
Maxinet – Thermostat Network
ETN-C-24-SUPER-Maxinet protocol
Wall mount, 24VAC thermostat for MaxiNet
AC
BMS system
The ETN-C-24-Super is an attractive thermostat for
COOL
easy HVAC control with MaxiNet BMS system.
Having most A/C applications built-in, field selectable
HEAT
and offering several stages of Cool and Heat and, the
ETN-C-24-Super is suitable for either Heat/Cool or
Heat Pump systems.
B.M.S
This flexibility, together with built in Maxinet protocol
COMPATIBLE
and energy saving algorithm make the ETN-C-24Super an easy, cost-effective solution for networking
COMM
in small to medium sized BMS.
°C
°F
Features
y Wall mount, 24 VAC thermostat
y Up to 3 stages for Heat & 2 stages for Cool
y DIP switch selectable applications:
y External sensor- option
* Heat/Cool or Heat Pump
EXT.
SENSOR
OPTION
y Selectable temperature scale - °C or °F
* Electric Heat or Oil/Gas
y Set Point limits- 10…30°C, 50…86°F
* Heat Pump in Heat or Heat Pump in Cool
MAC address configuration via DIP switches
y Economy mode
MaxiNet Communication Built in
y Easy to install and use
HP/HC
Wiring diagram
Models
Model
COMPRESSOR
DELAY
Heating
Stages
Cooling
Stages
Speeds
ETN-C-24-HC11-1S
1
1
1
B
ETN-C-24-HC22-1S
2
2
1
T
ETN-C-24-HP11-1S
1
1
1
To
ETN-C-24-HP21-1S
2
1
1
W2
B/O
Heat element 2 / Heat pump (0.5A)
ETN-C-24-HP32-1S
3
2
1
W1
Heat element 1 (0.5A)
Y2
Compressor 2 (0.5A)
Y1
Compressor 1 (0.5A)
G
Fan (0.5A)
A
Communication (Maxinet)
External sensor (option)
C
Main Input 24VAC
R
7-2
www.meitavtec.com | [email protected]
Maxinet – Thermostat Network
PS1800- Main controller - MaxiNet protocol
Main Controller for A/C and Fan coil in Building
B.M.S
Management System (BMS) application, with
COMPATIBLE
Maxinet protocol
The PS1800 Family consist of main controllers, with
MaxiNet Protocol, for A/C and Fan Coil MaxiNet BMS
applications. It has a modular, user-friendly design with
various A/C or Fan Coil applications built-in, field
AC
selectable. This modularity allows you to have one main
controller for different A/C or Fan Coil applications and
suit it according to customer’s needs on the spot.
COOL
The PS1800 Family also offers cost efficient capabilities,
such as, occupancy sensor, and smart algorithm for
HEAT
maximum energy saving.
Each of the PS1800 controllers are factory pre-
1/3
programmed to save valued time on field programming.
SPEEDS
Please note the PS1800 is also available as a
CTU1800, with additional advanced features.
Features
y Main Input - 230VAC
y Wall or flush mount panels available
y RS-485 Maxinet protocol
y MAC address 1-255 by DIP switch
y Main controller for multi AC or Fan Coil applications
y Occupancy Sensor - 12VDC supply
y Inputs
y Ambient Temperature reading from panel or from
* 8 x Digital Inputs
* 3 x Temperature sensor inputs
y Outputs
* 8 x Digital Outputs
* 2 x 0-10VDC
* 3-wire 24VAC (Open – Common – Close)
main board - selectable
y Celsius or Fahrenheit temperature display
COMPRESSOR
DELAY
y Lock pushbuttons - option
y Offset for temperature reading
y Set point limits - 10°…30°C , 50…86 °F
Available also in 24V configuration
Application
ECONOMY
EXT.
SENSOR
OPTION
FAULT
INPUT
°C
PS Fan-Coil controllers
Outputs operation
FC-SUPER
On/Off
P-FC-SUPER
0-10VDC proportional for Valve/Fan
PM2
3 wire (Open/Common/Close) 24VAC
°F
RT03
PS Air Condition controller
AC-SUPER
Compressor & Heat Pump outputs
www.meitavtec.com | [email protected]
7-3
7-4
Room panel
(option)
T3
0
0
PR
0
F1
Compressor 1 (0.5A)
H. pump / H. element 1 (0.5A)
High
Medium
Low
common for the outputs
N.C N.C
X2
2
1
X1
16
15
14
13
12
11
~F
F2
0
F4
0
F5
0
F6
www.meitavtec.com | [email protected]
0
H. element 2 (0.5A)
Not in use
Outdoor fan / H. element 3 (0.5A)
0
Not in use
Compressor 2 (0.5A)
FMH-X500-02
F3
Fan
(230VAC, 3A)
0
Communication
Maxinet protocol
0
Heat pump
configuration
7
OR
1 or 3 fan speeds
8
T2
Compressor delay
3.5 minutes
3
IRP-X500-02
Fault 3 (N.C.)
Flow sensor
2
0
Indoor sensor
OR
Fault 2 (N.C.)
Window contact
1
T1
Fault 1 (N.C.)
Indication only
IR -12V +12V
Outdoor sensor
TS-01 sensor only
(No Panel)
Celsius / Fahrenheit
Occupancy
sensor
Return air sensor
Maxinet – Thermostat Network
PS1800- Main controller - MaxiNet protocol
Configurations
Main Panel
PS1800
OR
ETN-X500-02
Control Panels/Accessories
Wiring diagrams
PS1800-AC-SUPER-02
Main input
230VAC
~
B
A
N
Maxinet – Thermostat Network
PS1800- Main controller - MaxiNet protocol
PS1800-FC-SUPER-02
PS-1800-P-FC-SUPER
(24VAC, 2.5VA)
(24VAC, 2.5VA)
F1
0
T3
F2
IR -12V +12V
0
0
Valve open/close time
F3
0
F4
0
F5
1
2
0
F6
Fault F2
0
0
Room panel
(option)
3
8
7
A
B
Communication
Maxinet protocol
Cool
Valve
PR
T2
Enable fan only mode
Heat
Valve
0
0
Occupancy
sensor
Fault F1
Open
Close
Common
Open
CL1 OP1 COM COM CL2 OP2
Common
C
Close
R
T1
Indoor coil sensor
11
PUMP
Change over sensor
12
L
24VAC input
(for valves)
Return air sensor
Low
13
N
Not in use
Medium
Main input
230VAC
Fan
(230VAC, 3A)
High
Condensing pump
(230VAC, 1A)
PS-1800-PM2-FC-SUPER
www.meitavtec.com | [email protected]
7-5
Maxinet – Thermostat Network
CTU1800- Main Controller B.M.S - Maxinet protocol
B.M.S
Main DDC Controller for Maxinet BMS application
COMPATIBLE
The CTU 1800 are smart, ready to install controller,
especially developed to work with the Maxinet SW.
The CTU1800 family Pre-Programmed, "Plug and Play" to
save valued time for the installers on site.
y Main Input- 230VAC , 110VAC or 24VAC
y 12VDC power supply for occupancy sensor
y RS-485 Communication port – proprietary Maxinet
y Adjustable Set point limits for cooling and
protocols.
y Panel interface to various designs Wall/flush mount/IR
panels - optional
y Inputs
* 8 x Digital Inputs
* 2 x Analog inputs (0-10VDC)
* 3 x Temperature Sensor inputs
y Outputs
* 8 x Digital Outputs (24VAC 110VAC or 230VAC –
based on the supply voltage)
* 2 x Analog Outputs (0-10VDC)
* 2 x 3-wire 24VAC (Open-Common-Close)
heating
AC
COOL
y Offset – for temperature reading adjustment
y IR input
HEAT
y 2 indication LEDs
y MAC address 1-255 by DIP switch
y 4 DIP switches for configuration purposes
y DIN rail connection
y CE certified
y Energy saving – cost effective, environmentally
AUTO FAN
friendly controller
Application
CTU Fan-Coil controllers
Outputs operation
FC-SUPER
On/Off
P-FC-SUPER
0-10VDC proportional for Valve/Fan
PM2
3 wire (Open/Common/Close) 24VAC
ECONOMY
CTU Air Condition controller
AC-SUPER
Compressor & Heat Pump outputs
WSHP (Water Source Heat Pump)
Compressor & Heat Pump
EXT.
SENSOR
OPTION
RT03
°C
7-6
www.meitavtec.com | [email protected]
°F
2 x Indication
LEDs
Configuration
MAC
Address
Comm.
RS-485
0
B
A
AI2
0
AI1
V2
AO2
0
AO1
7
8
3
2
1
PO4
COM
PO3
PO2
COM
PO1
COM
2 x Analog
Outputs 0-10V
Room
Panel
2 x 3-Wire
outputs
8 x Digital
Outputs
0.5A Each
Dry contact w/DO1
Common for D/O’s
ETN-X500
5VDC Output
2 x Analog
Inputs 0-10V
T3
DO8
DO7
DO6
DO5
DO4
DO3
DO2
DO1
X1
V1
OR
0
T2
0
T1
DI8
0
DI7
DI6
0
DI5
FMH-X500
3 x Temp.
Inputs
0
DI4
Main
Supply
OR
12VDC Output
8 x Digital
Inputs
DI3
DI2
0
DI1
L
N
Maxinet – Thermostat Network
CTU1800- Main Controller B.M.S - Maxinet protocol
Configurations
Main Panel
OR
FMT-X500
IRP-X500
Control Panels/Accessories
Wiring diagram
www.meitavtec.com | [email protected]
7-7
Maxinet – Thermostat Network
CTU1601 - Maxinet protocol
Input Output card for Maxinet system with 8
outputs 230V, 8 inputs dry contact and 3
Temperature readings
COMM
The CTU-1601 is an Input Output (IO) card for Maxinet
EXT.
SENSOR
OPTION
system. It has 8 inputs, dry contact to view the status of
various devices, and 8 outputs 230V 0.5A, to manage
general devices from the Maxinet software, such as:
- Air compressor
- Chiller
- Fresh air damper
- Lights
- Outdoor lights
- Extractors
- Fans
The 8 outputs can be weekly programmed from the
software very easily. In addition, the CTU-1601 offers 3
Temperature sensor inputs, enabling to see temperatures
in 3 locations.
Available also in 24VAC version
Features
y 8 Digital outputs – 230 V, 0.5 A
y Works with Maxinet Software
y 8 Digital inputs – volt free – dry contact
y Easy connection to Din Rail
y 3 Temperature readings
Wiring diagram
7-8
www.meitavtec.com | [email protected]
Maxinet – Thermostat Network
PS1600 - Maxinet protocol
Output card for Maxinet system, with up to
8 outputs – dry contact
The PS-1600 is an output card for Maxinet mini
COMM
B.M.S. system. It has 8 outputs, dry contact, to
control energy consuming devices / systems,
ECONOMY
connected to Maxinet system, such as:
y Air compressor
y Fresh air damper
y Lights
y Outdoor lights
y Extractors
y Fans
These outputs can be viewed, controlled and
monitored from the Maxinet software and can
also be easily weekly programmed.
Features
y 8 outputs - dry contact, normally open
y Up to 16 units per network
y Works with Maxinet Software
y 12VDC operating voltage
y PS201P as power supplier
Wiring diagram
www.meitavtec.com | [email protected]
7-9
Communication / B.M.S.
PS2500/4500 Main Controller – BACnet/Modbus Protocol
Main Controller for A/C and Fan coil in Building
B.M.S
Management System (BMS) application, with BACnet or
COMPATIBLE
Modbus protocol
COMM
The PS2500/4500 - Family consist of main controllers, with
FC
BACnet or Modbus Protocol, for A/C and Fan Coil BMS
applications. It has a modular, user-friendly design with various
A/C or Fan Coil applications built-in, field selectable. This
AC
modularity allows you to have one main controller for different
A/C or Fan Coil applications and suit it according to customer’s
needs on the spot.
COOL
The PS2500/4500 - Family also offers cost efficient capabilities,
HEAT
such as, occupancy sensor, and smart algorithm for maximum
1/3
energy saving.
SPEEDS
Each of the PS2500/4500- controllers is factory pre-programmed
to save valued time on field programming.
AUTO FAN
Please note the PS2500/4500 are also available as a
CTU2500/4500, with additional advanced features.
HP/HC
Features
AUTO
CHANGE-OVER
y Main Input- 230VAC
y Wall or flush mount panels available
y RS-485 communication port – Available in BACnet or
y MAC address 1-255 by DIP switch
Modbus protocols:
* PS2500 Family – BACnet protocol controllers
* PS4500 Family – Modbus protocol controllers
y Main controller for multi AC or Fan Coil applications
y Inputs
* 8 x Digital Inputs
* 3 x Temperature sensor inputs
* 2 x Analog inputs 0-10V
COMPRESSOR
DELAY
y Occupancy Sensor - 12VDC supply
y Ambient Temperature reading from panel or
from main board - selectable
y Celsius or Fahrenheit temperature display
y Lock pushbuttons - option
y Offset for temperature reading
y Set point limits - 10°…30°C , 50…86 °F
ECONOMY
EXT.
SENSOR
OPTION
FAULT
INPUT
°C
°F
y Outputs
* 8 x Digital Outputs
* 2 x 0-10VDC proportional outputs
* Optional - 3-wire 24VAC (Open – Common – Close)
www.meitavtec.com | [email protected]
8-1
Communication / B.M.S.
PS2500/4500 Main Controller – BACnet/Modbus Protocol
Configurations
Main Panel
PS2500
OR
OR
FMH-X500
OR
IRP-X500
ETN-X500
FMT-X500
Control Panels/Accessories
Application
CTU Fan-Coil controllers
Outputs operation
FC-SUPER
On/Off
P-FC-SUPER
0-10VDC proportional for Valve/Fan
PM2
3 wire (Open/Common/Close) 24VAC
TA2
Thermal Actuator
CTU Air Condition controller
AC-SUPER
8-2
www.meitavtec.com | [email protected]
Compressor & Heat Pump outputs
Communication
BACnet protocol
Not in use
Fault 2
(indication through protocol)
Enable fan only mode
Fault 1
(open – all outputs off)
Temperature scale
Indoor coil sensor
Change over sensor
Return air sensor
Low
Medium
High
Heat (230VAC,1A)
Cool (230VAC,1A)
Pump Output (230VAC,1A)
Communication / B.M.S.
PS2500/4500 Main Controller – BACnet/Modbus Protocol
Wiring diagrams
PS2500-3S-FC-SUPER / PS4500-3S-FC-SUPER
PS2500-P-3S-FC-SUPER / PS4500-P-3S-FC-SUPER
www.meitavtec.com | [email protected]
8-3
Communication / B.M.S.
PS2500/4500 Main Controller – BACnet/Modbus Protocol
PS2500-PM2-3S-FC-SUPER / PS4500-PM2-3S-FC-SUPER
PS2500-TA2-3S-FC-SUPER / PS4500-TA2-3S-FC-SUPER
PS2500-AC-SUPER-02-WET / PS4500-AC-SUPER-02-WET
8-4
www.meitavtec.com | [email protected]
Communication / B.M.S.
CTU2500/4500 Main Controller – BACnet/Modbus Protocol
Main DDC Controller for B.M.S application for A/C or
F/C applications with BACNET or MODBUS protocols
B.M.S
The CTU2500/4500 family are smart, highly versatile
COMPATIBLE
controllers.
Meitavtec has especially developed this product to meet the
COMM
need for a controller, readily implemented for customer's
AC
unique HVAC application.
The CTU2500/4500 - Family controllers are factory preprogrammed "Plug & Play" to save valued time for the
installers on field programming.
HEAT
0-10V
OUTPUT
Features
y Main Input- 230VAC , 110VAC or 24VAC
y RS-485 communication port – Available in BACnet or
Modbus protocols:
* CTU2500 Family – BACnet protocol controllers (BTL
Certified)
* CTU4500 Family – Modbus protocol controllers
y Panel interface to various designs Wall/flush mount/IR
panels - optional
y Inputs
* 8 x Digital Inputs
y 12VDC power supply for occupancy sensor
heating
y Offset – for temperature reading adjustment
AUTO FAN
FAULT
INPUT
y IR input
y 2 indication LEDs
y MAC address 1-255 by DIP switch
y 4 DIP switches for configuration purposes
y DIN rail connection
* 3 x Temperature Sensor inputs
y CE certified
* 8 x Digital Outputs (230VAC, 110VAC or 24VAC –
SPEEDS
y Adjustable Set point limits for cooling and
* 2 x Analog inputs (0-10VDC)
y Outputs
1/3
y Energy saving – cost effective, environmentally
friendly controller
°C
°F
depending on the supply voltage)
* 2 x Analog Outputs (0-10VDC)
* 2 x 3-wire 24VAC (Open-Common-Close)
EXT.
SENSOR
OPTION
www.meitavtec.com | [email protected]
8-5
Communication / B.M.S.
CTU2500/4500 Main Controller – BACnet/Modbus Protocol
Configurations
Main Panel
CTU2500/4500
OR
OR
FMH-X500
OR
IRP-X500
ETN-X500
FMT-X500
Control Panels/Accessories
Application
CTU Fan-Coil controllers
Outputs operation
FC-SUPER
On/Off
P-FC-SUPER
0-10VDC proportional for Valve/Fan
PM2
3 wire (Open/Common/Close) 24VAC
TA2
Thermal Actuator
CTU Air Condition controller
8-6
AC-SUPER
Compressor & Heat Pump outputs
WSHP (Water Source Heat Pump)
Compressor & Heat Pump
www.meitavtec.com | [email protected]
0
DI6 DI7
0
N
DI8 12V
N
N
T1
0
T2
0
T3
0
Communication
BACnet protocol
N
T3 -Indoor Sensor
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
T2 – Outdoor sensor
Low
“N”
T1 - Return air sensor
DI4 DI5
12Vdc supply voltage – option
(30mA max)
0
Occupancy sensor
DI2 DI3
Digital input 7 – Indication only
0
Digital input 6 – Heat pump config.
DI1
V1
Digital input 5 – Fan speeds
L
Digital input 4 – Compressor delay
Main Supply
230VAC
Medium
High
H.Pump/H.Element 1 (0.5A)
Compressor 1 (0.5A)
Outdoor Fan/H.El. 3 (0.5A)
Compressor 2 (0.5A)
H.Element 2 (0.5A)
Feeding to
outputs
“WET”
Fault 3 – Flow sensor (N.C.)
N
Fault 2 – Window contact (N.C.)
Digital input 1 – Indication only
Communication / B.M.S.
CTU2500/4500 Main Controller – BACnet/Modbus Protocol
Wiring Diagrams
CTU2500-AC-SUPER-02-WET / CTU4500-AC-SUPER-02-WET
Fan (3A)
Input
Room panel
(option)
1
2
A
B
3
7
Not in use
8
AO1 0 AO2
CTU2500-3S-FC-SUPER / CTU4500-3S-FC-SUPER
www.meitavtec.com | [email protected]
8-7
Communication / B.M.S.
CTU2500/4500 Main Controller – BACnet/Modbus Protocol
CTU2500-P-3S-FC-SUPER-02 / CTU4500-P-3S-FC-SUPER-02
Fan
230VAC, 3A
Main Supply
230VAC
N
L
V1
DI1
0
DI2 DI3
“N”
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
0
DI4 DI5
Room panel
(option)
Input
Not in use
0
DI6 DI7
0
DI8
N
12V
N
N
N
T1
0
T2
0
T3
0
1
2
A
B
3
7
8
Digital inputs
CTU2500-PM2-3S-FC-SUPER-01 / CTU4500-PM2-3S-FC-SUPER-01
CTU4500-WSHP-WET-01
8-8
www.meitavtec.com | [email protected]
AO1 0 AO2
Communication / B.M.S.
FMHC220-FC-MDB03 - Modbus RTU Protocol
Flush mount, 230VAC thermostat, for Fan Coil
B.M.S. applications, with Modbus protocol
The FMHC220-FC-MDB03 is a highly versatile, stand alone
thermostat, suitable for Building Management System
application, with Modbus communication protocol.
With
multiple,
selectable
modes
of
operation,
the
FMHC220-FC-MDB03 offers suitability to 2-Pipe, 4-Pipe or
no valve Fan Coil system, electrical heating element option,
and can function as either Coo/Heat or Cool Only
HEAT
thermostat.
Using DIP switch, technician can select between applying Auto-Change-Over sensor, or alternatively utilizing a
1/3
SPEEDS
contact input for Economy mode to save energy. In addition, it offers the Auto-Fan feature to work at either Cool,
or Heat or at both. Additional features, such as Set Point Temp. Limits, Dead Zone and Room Temperature Offset
ECONOMY
°C
are all implemented and changeable.
Overall, the FMHC220-FC-MDB03 offers numerous options, nonetheless setting is simple and user friendly.
AUTO
CHANGE-OVER
Features
y Flush mount, 230VAC thermostat
y 2 separate outputs for Cool & Heat
y DIP switch selectable options:
* Auto-Change-Over sensor or Contact input
* 2-pipe or 4-pipe system
y Contact input changes to Economy mode or
turns unit off (Optional)
y Cool Only thermostat – option
y Disable Fan operation – option (only in Cool,
only in Heat, or in both)
y Set point limits – 10…30°C
* With or without Auto-Change-Over mode
y 3 Auto-Fan types:
temp. display only
* Always Auto-fan or Auto-fan selectable
* Internal or external temperature sensor
y Modes: Cool/ Heat / Auto- Change-Over/ Fan Only
AUTO FAN
y Electrical heater - option
* 1 or 3 fan speed control + Auto Speed
* Set point & room temp. display on LCD, or set point
EXT.
SENSOR
OPTION
* Auto-fan in Cool & Heat
* Auto-fan only in Cool
* Auto-fan only in Heat
y Password for protected setting
y Pushbutton beeper – option
y Hand held remote control (RT03) - option
Wiring diagram
www.meitavtec.com | [email protected]
8-9
Communication / B.M.S.
FMHC220-P-FC-MDB01 – Modbus RTU Protocol
FC
Flush mount, 230VAC thermostat, for Fan Coil
B.M.S. applications, with proportional outputs
for Cool & Heat, 3 Fan Speeds and Modbus
B.M.S
interface
COMPATIBLE
The FMHC220-P-FC-MDB01 is a distinguished, stand
COMM
alone, proportional thermostat for 2-Pipe or 4-Pipe Fan
Coil applications. Its Modbus communication protocol
COOL
makes it also compatible for Building Management
System (B.M.S.) applications.
HEAT
It offers modular, user friendly configuration to best suit customer’s needs. Features, such as Set Point limits, dead
zone or offset are adjustable while others as internal / external sensor 1 or 3 fan speed or auto-change-over are
all selectable.
The FMHC220-P-FC-MDB01 is an esthetic, flush-mount thermostat which offers increased energy savings as well as
comfort to the user.
1/3
Features
AUTO
CHANGE-OVER
y Flush mount, 230VAC thermostat
y 2 proportional (0-10V) outputs for Cool & Heat
y Modes: Cool/ Heat / Auto- Change-Over/ Fan Only
y DIP switch selectable options:
* 2Pipe or 4Pipe Fan Coil
* 1 or 3 fan speed
* Auto-change-over sensor or Contact input
* With or without auto-change-over
* Set point & room temp. display or set-point
temp. display only
* Auto-Fan
Wiring diagram
8-10
www.meitavtec.com | [email protected]
y Internal /External sensor
y Energy saving – cost efficient,
SPEEDS
ECONOMY
environmental
friendly thermostat
°C
y Dead zone – 0…5°C
y Set point temp. limits – 10…30°C
y Offset - ±6°C
y Lock / un-lock thermostat pushbuttons
AUTO FAN
EXT.
SENSOR
OPTION
y Pushbutton beeper - option
y Programmable MAC address – 1…99 addresses –
LOCK OPT.
DIP switch configurable
y Fits into Gewiss box
y Remote control (RT03) - optional
RT03
Communication / B.M.S.
ETN-X500
Wall mount, thermostat panel, serving as a user
interface
of
applicable
for
a
communicating
B.M.S
(Building
controller,
COMM
Management
B.M.S
Systems)
COMPATIBLE
The ETN-X500 is a wall mount, thermostat panel,
FC
functioning as a user interface of a communicating
controller.
AC
Having advanced communication capabilities, it is an
ideal panel for B.M.S. applications.
Temperature may be sensed either through the wall
panel’s built-in temperature sensor, or through the
COOL
return air sensor connected to the main board.
The ETN-X500 is a well designed room panel for
Meitav-tec's communicating controllers, appreciated by
architects worldwide.
AUTO FAN
Features
y Wall mount panel
y Built-in communication
y On /Off
y Temperature may be sensed either through the
wall panel’s built-in temperature sensor, or
through the return air sensor – DIP switch
°C
°F
EXT.
SENSOR
OPTION
selectable
y Set temperature
y Suitable for Meitav'tec's controllers
y Modes: Cool / Heat / Auto-Change-Over/Fan Only
y Silicon rubber pushbuttons
y Auto-Fan
y Large, easy to read display
y 3 fan speeds
y Various panel colors available
RT03
ECONOMY
Wiring diagram
www.meitavtec.com | [email protected]
8-11
Communication / B.M.S.
FMH-X500
Flush mount, thermostat panel, serving as a user
interface of Meitav-tec communicating controller,
applicable
for
B.M.S
(Building
COMM
Management
B.M.S
Systems)
COMPATIBLE
The FMH-X500 is a flush mount, thermostat panel,
functioning as a user interface of a communicating
controller.
Having advanced communication capabilities, it is an ideal
AC
panel for BMS applications.
Temperature may be sensed either through the wall panel’s
built-in temperature sensor or through the return air sensor
COOL
connected to the main board.
The FMH-X500 is a smart looking thermostat with a soft
1/3
aesthetic shape and a large, easy to read LCD display
SPEEDS
Features
y Flush mount, horizontally shaped panel
y Built-in communication
y On /Off
y Set temperature
y Modes: Cool / Heat / Auto-Change-Over/Fan Only
y Temperature may be sensed either through
the wall panel’s built-in temperature sensor,
or through the return air sensor – DIP switch
selectable
y Suitable for Meitav'tec's B.M.S.
communicating controllers
y Auto-Fan
y Silicon rubber pushbuttons
y 1 or 3 fan speeds
y Large, easy to read display
y Various panel colors
Wiring diagram
8-12
www.meitavtec.com | [email protected]
AUTO
CHANGE-OVER
EXT.
SENSOR
OPTION
°C
°F
RT03
Communication / B.M.S.
FMT-X500
Flush mount, thermostat panel, serving as a
user interface of a communicating controller,
applicable for B.M.S (Building Management
Systems)
COOL
The FMT-X500 is a flush mount, thermostat panel,
HEAT
functioning as a user interface of a communicating
controller.
Having advanced communication capabilities, it is an
ideal panel for BMS applications.
AUTO FAN
Temperature may be sensed either through the wall
panel’s built-in temperature sensor, or through the
return air sensor connected to the main board.
COMM
Features
y Flush mount, vertically shaped, panel
y Built-in communication
y On /Off
y Set temperature
y Modes: Cool / Heat / Auto-Change-Over/
Fan Only
y Auto-Fan
y Temperature may be sensed either through the wall
RT03
panel’s built-in temperature sensor, or through the return
air sensor – DIP switch selectable
y Suitable for Meitav'tec's controllers
y Silicon rubber pushbuttons
y Large, easy to read display
y Various panel colors
y 3 fan speeds
Wiring diagram
www.meitavtec.com | [email protected]
8-13
Communication / B.M.S.
IRP-X500 + RT03
Infra Red Panel operating +IR remote Control to
operate Meitav-tec's communicating controller,
COMM
applicable for B.M.S. (Building Management
AC
Systems)
The IRP-X500 is an Infra Red Receiving Panel operating a
communicating controller.
Having advanced communication capabilities, it is a perfect
solution for B.M.S. applications.
Temperature may be sensed either through IRP's built-in
COOL
temperature sensor, or through the return air sensor
connected to the main board.
HEAT
Features
y Wall mount, Infra Red Panel + IR remote control
y Built-in communication with controller
y On /Off
y Temperature
through
the
may
wall
be
sensed
panel’s
either
built-in
air sensor – jumper selectable
y Suitable for Meitav'tec's controllers
y Modes: Cool / Heat / Auto-Change-Over/Fan Only
y Panel dimensions – 46 x 38 x 19 mm
y 1 or 3 fan speeds
Wiring diagram
www.meitavtec.com | [email protected]
1/3
SPEEDS
temperature sensor, or through the return
y Set temperature
y Auto-Fan
8-14
AUTO
CHANGE-OVER
AUTO FAN
RT03
Communication / B.M.S.
CTU2601 - BACnet Protocol
B.M.S
Input / Output card for BACnet communication net
COMPATIBLE
The CTU-2601 is an Input / Output (I/O) card for BACnet
communication net, designed to control various devices
COMM
from software.
It has 8 inputs, dry contact to view the status of any
device or other input connected and 8 outputs to control
any device, such as:
- Air compressor
- Chiller
- Fresh air damper
- Lights
- Pump
- Fans
The CTU-2601 also offers 3 Temperature sensor inputs in
order to view temperature in different locations, 2 Analog
Inputs and 2 Analog Outputs.
Features
y 8 Digital Outputs – Available in either 230VAC, 110VAC
y 3 Temperature reading Inputs*
or 24VAC
(50K @ 25ºC)
y 2 Analog Outputs, 0-10VDC
y Easy connection to Din Rail
y 8 Digital Inputs – voltage free – dry contact
y MAC Address selection by DIP Switches
y 2 Analog Inputs, 0-10VDC
* The 3 Temperature readings inputs may be
used as Digital Inputs – Dry contact as well.
T1
0
T2
0
Temp. sensor T2/
Digital Input 10
DI8
Temp. sensor T1 /
Digital Input 9
0
Digital Input 8
Digital Input 7
DI6 DI7
Digital Input 6
0
Digital Input 5
DI4 DI5
Digital Input 4
Digital Input 3
0
Analog Output 2
0
AI1
0
AI2 5VDC
A
Communication
BACnet protocol
DI2 DI3
Analog Input 2
0
0-10VDC
DI1
AO1 0 AO2
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
Analog Input 1
V1
Digital Input 2
L
Digital Input 1
N
0-10VDC
Digital Outputs 1-8
230VAC, 0.5A each
Temp. sensor T3 /
Digital Input 11
Main input
230VAC
Analog Output 1
Wiring diagram
T3
B
Normally Open
www.meitavtec.com | [email protected]
8-15
Communication / B.M.S.
CTU4601 - Modbus RTU Protocol
Input
/
Output
card
for
B.M.S
Modbus
communication net
COMPATIBLE
The CTU-4601 is an Input / Output (I/O) card
COMM
for Modbus communication net, designed to
control various devices from B.M.S. software.
It has 8 inputs, dry contact to view the status
of any device or other input connected and
8 outputs to control any device, such as:
- Air compressor
- Lights
- Chiller
- Pump
- Fresh air damper
- Outdoor Lights
The CTU-4601 also offers 3 Temperature sensor inputs in order to view temperature in different locations and 2
analog inputs.
Features
y 8 Digital Outputs – Available in either
230VAC, 110VAC or 24VAC
y 3 Temperature reading Inputs (50KΩ @ 25ºC)
y Easy connection to Din Rail
y 8 Digital Inputs – voltage free – dry contact
y MAC Address selection by DIP Switches
y 2 Analog Inputs, 0-10VDC
8-16
www.meitavtec.com | [email protected]
Communication
Modbus protocol
Analog Input 2
0-10VDC
Analog Input 1
Temp. sensor T3
Temp. sensor T2
Temp. sensor T1
Digital Input 8
Digital Input 7
Digital Input 6
Digital Input 5
Digital Input 4
Digital Input 3
Digital Input 2
Digital Input 1
Wiring diagram
Communication / B.M.S.
CTU2646 – Input/Output card
Input / Output card for BACnet and Modbus
B.M.S
communication net
COMPATIBLE
The
CTU2646
for
is
BACnet
protocols,
an
or
designed
Input/Output
Modbus
to
control
(I/O)
card
COMM
communication
various
devices
from the Building Automation Server/Application.
It has 12 inputs, dry contact to view the status of any
device or other input connected and 4 outputs to control
any device, such as:
- Air compressor
- Chiller
- Fresh air damper
- Lights
- Pump
- Fans
Features
y Main supply: 230VAC or 110VAC
y Easy connection to Din Rail
y RS-485 Communication port - BACnet (BTL certified) or
y MAC Address selection by DIP Switches
Modbus operation selectable by DIP switch
y 12 x Digital Inputs – voltage free – dry contact
Note: 24VAC to Dry contact Adaptor can be
y DI12 digital input can be converted to 24V Input -
supplied upon order.
jumper selectable
y 4 X Digital outputs (Change Over)
y Selectable Digital outputs configuration - N.O/N.C
Wiring diagram
www.meitavtec.com | [email protected]
8-17
Communication / B.M.S.
TCP/IP – Web HVAC Network Controller & viewer
The TCP/IP/WEB controller is an ideal
B.M.S
solution for real-time monitoring and
COMPATIBLE
control of a thermostat network, via the
internet,
without
the
need
for
COMM
designated computer.
The TCP/IP/WEB enables access to the HVAC
Network Control program via an exclusive IP,
and therefore doesn't require a main control
computer.
Up
to
240
Meitav-Tec
thermostats/controllers can be connected to
each TCP/IP/WEB via RS-485 communication
network making the control simple, easy and
most importantly accessible from any device
with internet access.
The TCP/IPWEB offers a user friendly interface
with options for area/floor scheme display,
text alarms to cellular phones, weekly
program, data logger and more.
Features
y Main supply: 230VAC or 110VAC
y Real-Time,
thermostats
network
y Alarm to telephone numbers by Texting - optional
main
controller
y Web access to each controller via exclusive
IP
y Adjustable Set point limits for cooling and
heating
y Weekly programs
y Ethernet/Internet Connection
Schematic Layout
8-18
www.meitavtec.com | [email protected]
y Data logger (can be exported to Excel)
y Friendly, clear graphic display of all units
y Remote control of all units in the network
y Replaces the need for dedicated computer on site
y System continues to work as a standalone system when
disconnected from the web
Multi-Zone Systems
PSMZ-100/200 for Multi-Zone System
24VAC, Controller for multi-zone system
AC
controlling 4 to 7 zones
The PS-MZ 100/200 is ideal for residential, commercial or
COOL
industrial applications. It is compatible with Heat/Cool or
Heat Pump HVAC applications and can control up to 4
(PS-MZ100) or 7 (PS-MZ200) different zones.
One of the zones serves also as the master, and different
types of thermostats can be selected as masters or zones.
Zones can also be programmed for on/off, ideal for times
when the zone is less occupied.
DAMPER
CONTROL
3-WIRE
OUTPUT
The main board offers inputs for Bypass and Fresh Air
dampers and 3 different temperature sensors. Other
features such as Auto-Changeover mode and quick
AUTO
CHANGE-OVER
connectors from the thermostats to the main board, make
this multi-zone the simplest and most efficient climate
ECONOMY
control system.
Features
PROG
y Main Input - 24VAC
y Energy saving and cost efficient system
y Controls up to 4 zones (PS-MZ100) or 7 zones
y Output for dampers- 3-wire , 24 VAC
(PS-MZ200)
y Fresh Air Dampers- 2 logics for open/close:
y Zone 1 also serves as Master (same thermostat)
1. by timer (min per hour), or
y Heat/Cool or Heat pump - Selectable
2. by temperature difference (T1-T2)
y Up to 4 stages for Heat and 2 stages for Cool
y Selectable Heat output- Electric or Oil/Gas (jumper
selectable)
y Modes: Cool, Heat, Auto-change Over, Fan Only –
selectable through Master only
y T1 Sensor - Indoor temperature sensor- option
(for Fresh Air Damper)
y T2 Sensor - Outdoor temperature sensor- option
(for Fresh Air Damper)
y Bypass Damper (3-wire) output
y Display temperature available in °C or °F –
depending on model ordered
y Economy
mode
(Unoccupied
mode)
–
optional
y Zone thermostats with weekly program –
optional, depending on model ordered
y Weekly Program type- (5-1-1) - 4 times Set
Cool/Set Heat
y T3 Sensor - Indoor Coil sensor (freeze protection in Cool
and overheat protection in Heat)
www.meitavtec.com | [email protected]
9-1
Multi-Zone Systems
PSMZ-100/200 for Multi-Zone System
Master & Zone 1 M100
Different types of thermostats can be selected for masters and zones; wall or flush mount, with C° or F°
temperature display, programmable or non-programmable. Programmable controllers are ideal for times when zones
are unoccupied, and is therefore energy saving and cost efficient.
When thermostat functions as a Master, it Controls
main system functions:
y On/Off
Functions of thermostat as Zone 1:
y Local Fan
y Local set point
y Mode (Cool, Heat, Auto, Fan Only)
y Activate or de-activate Economy Mode - Unoccupied
y Weekly program- option depending on
thermostat ordered
Mode)
y Set Fresh Air damper logic
Zone Z100
y Set local On/Off status
y Weekly program- option (depending on thermostat ordered)
y Set local set point
y Fan On / Auto Fan
Models
Master & Zone model
Scale
Program.
Zone Model
Scale
Program.
ETN-M100-C
Celsius
-
ETN-Z100-F
Fahrenheit
-
ETN-M100-F
Fahrenheit
-
ETN-Z100-C
Celsius
-
ETN-M100-Prog-C
Celsius
+
ETN-Z100-F-Prog
Fahrenheit
+
ETN-M100-Prog-F
Fahrenheit
+
ETN-Z100-C-Prog
Celsius
+
Note: All Master and Zone thermostats are available in flush-mount models (FMT) as well.
Wiring diagram
9-2
www.meitavtec.com | [email protected]
Multi-Zone Systems
PS 2007/P - Multi-Zone Control System
230VAC
system
Controller
with
for
multi-zone
proportional,
A/C
SYSTEM
3-wire
Master
M2007/E
AC
PS-2007/P
damper outputs, to control up to 7
zones
The PS 2007/P is a simple yet extremely
intelligent controller for Multi-Zone system,
ByPass
Damper
ideal for small to medium scale apartments
HEAT
Upto 7
Zone Dampers
and houses.
HP/HC
Upto 7
Zone Thermostats
3-WIRE
OUTPUT
Controlling up to 7 zones, it is compatible with Heat/Cool or Heat Pump HVAC systems. The PS 2007/P offers
proportional damper outputs (both for the zones and the bypass and 3 different temperature sensor inputs. With
°C
a separate master to control the system parameters (ON/OFF, Mode, Fan), the PS 2007/P is an environmental
EXT.
SENSOR
OPTION
friendly and energy saving system.
Features
y Main Input - 230VAC
y Controls up to 7 zones
y 3 wire, proportional damper output
y Selectable system configuration- Heat/Cool or Heat
Pump
y Selectable Heat output- Electric or Oil/Gas (jumper
selectable)
y Up to 3 stages of Heat and 2 stages of Cool
y Modes: Cool, Heat, Fan Only- selectable through
Master only
y T2 - Outdoor coil temperature sensor (de-frost
RT41
y T3 - Indoor coil temperature sensor (freeze
protection in Cool)
y Energy saving, environmental friendly system
TIMER
ECONOMY
y Wall or flush mount thermostat for zone
controller (ETN-41-P or FMH-41-P)
PROG
y Master unit with weekly program- start time/stop
FREEZE
PROTECT
time
y Zone damper outputs- Proportional Integral logic
(for Meitav-tec dampers only)
y Bypass damper output - proportional
y Open / Close time 13-15 seconds, I=20mA
protection in Heat)
www.meitavtec.com | [email protected]
9-3
Multi-Zone Systems
PS 2007 - Multi-Zone Control System
M2007
Master Controller
Wall mount, Master Controller for Multi-zone systems
(up to 7 zones)
The M2007-E Master Controller is the main controller for the
main system functions.
Features
y On/Off
y Fan speed (Hi-Med-Low)
y Modes: Cool, Heat, Fan Only
y Fan On – Auto Fan
y Set weekly program for all system - optional
y Energy saving and cost efficient
Zone Z-2007
Zone Controller for Multi-zone systems Wall or flush mount with optional hand held remote
control
Two types of controllers can be selected for zones;
y Wall-mount - ETN-41-P-IR, with hand held remote control
(RT-41)
y Flush-mount - FMH-41-P-IR, with hand held remote
control (RT-41)
Features
y Set local On/Off status
y Set local temperature set point
9-4
www.meitavtec.com | [email protected]
Multi-Zone Systems
PS-MZ502 Multi-Zone System
24VAC, Multi-Zone and climate control system, to
AC
control up to 31 zones
The PS-MZ502 is an advanced multi-zone system
controlling up to 31 Zones. It is the perfect climate control
system for small to medium residential, commercial or
industrial applications, enabling users to decide which
rooms in their house or office will be air conditioned or
HEAT
closed.
Suitable for Heat/Cool or Heat Pump applications, the
HP/HC
PS-MZ502 allows multiple stages of Cool and Heat.
1/3
The Master Unit M500 allows users to view and change
SPEEDS
zone parameters, such as local On/Off and set point. It is
also used to set the main system parameters.
Through the main board, features such as proportional Fresh Air and Bypass damper outputs are available. A special
pressure sensor input exists, in order to control the bypass damper. There are also 2 different fault inputs and 3
temperature sensor inputs.
Overall, the PS-MZ502 multi-zone system improves occupant comfort with maximum energy saving.
EXT.
SENSOR
OPTION
Features
y Main Input - 24VAC
y T1- Indoor temperature sensor
y Controls up to 31 zones
y T2- Outdoor temperature sensor
y Energy saving, environmental friendly system
y T3- Duct temperature sensor (freeze protection in
y Communication to Maxinet Thermostat network
y Selectable system configuration- Heat/Cool or Heat
Pump, 2 Pipe or 4 Pipe Fan Coil
Cool, overheat protection in Heat)
y 12-h Timer / 24-h Timer – DIP switch selectable
y Access zones from master (set point, on/off)
y Selectable Heat output- Electric or Oil/Gas (jumper
y Master unit with weekly program- jumper selectable
y Modes: Cool, Heat, Auto-change Over, Fan Onlyselectable through Master ONLY
y Output for dampers- 3-wire, 24VAC, general
purpose with P.I logic
* Zone dampers- open / close time adjustable
* Fresh Air Dampers- 2 logics for open/close:
o by timer (min. per hour) OR
o by temperature difference (T1-T2)
* Bypass Damper (0-10V) output- 2 options:
o by pressure (input for air pressure sensor) OR
ALARM
y Display temperature available in C° or F°
y Up to 4 stages of Heat and 2 stages of Cool
selectable)
ECONOMY
PROG
TIMER
y Weekly Program- 7 days, 4 programs per day (start
time/stop time)
y 1 or 2 fan speeds
y Input for air pressure sensor- for bypass output
y Compressor delay- option
y Economy (Set Back) Mode available for individual
zones or all the system
y F1- Fault input, normally closed, voltage free- all
system OFF
y F2 - Fault input, normally closed, voltage freealarm indication on master
o by number of rooms
www.meitavtec.com | [email protected]
9-5
Multi-Zone Systems
PS-MZ502 Multi-Zone System
Master M500 Controller
Zone Z500 Controller
The Master M500 of PS-MZ502 Multi Zone system
The Zone Z500 controls the following functions:
controls main system and zone functions :
y Set local On/Off status
Main system functions
y Set local set point
y On/Off
y Modes: Cool, Heat, Auto-change-over, Fan Only
y Fan: Fan On – Auto Fan
y Activate or de-activate Economy Mode (Unoccupied
Mode)
y View main system parameters- damper status, faults,
pressure, T2, T3
y Set Fresh Air damper and Bypass damper logic
y Set weekly program for all system- option
(7 days, 4 programs per day)
y Maxinet Networking connection - option
Zone Functions
y local ON/OFF
y Set point
y Local temperature limits - password protected
y View zone parameters- mode, set point, % open of
dampers
Wiring Diagram
9-6
www.meitavtec.com | [email protected]
y Set local temperature limits (password protected)
y Adjust damper’s open/close time
Damper Control Solutions
ETN-24-AZC
DAMPER
CONTROL
24VAC damper controller, proportional, with an
option for a duct temperature sensor
COOL
The ETN-24-AZC is the best stand-alone damper controller
HEAT
with a proportional output. This thermostat can control all
standard, general purpose dampers- (3-wire, 24VAC) and its
AUTO
CHANGE-OVER
Open / Close time is adjustable by the user.
ECONOMY
The ETN-24-AZC also has a special option to connect a duct
3-WIRE
OUTPUT
temperature sensor, which senses the airflow temperature
and automatically selects the mode (Auto-Change-Over).
°C
°F
Features
y 24VAC damper controller
y Set point limits for cooling and heating
y Proportional, 3-wire output for dampers
y Adjustable open/close time for motor
y Two different temperature scales: Fahrenheit or Celsius
y External Sensor – Option
y Offset for temperature reading adjustment
y Energy saving – cost efficient, environmental friendly
(10 - 400 seconds)
y Duct sensor for Auto Change-Over mode –
option
y Remote Control – RT41
thermostat
Wiring diagram
www.meitavtec.com | [email protected]
10-1
Damper Control Solutions
FMT-24-AZC-Proportional-IR
Flush mount, 24VAC thermostat for Damper
control, with a proportional 3-wire output
The FMT-24-AZC is an ideal stand-alone damper
COOL
controller with a proportional floating output. This
thermostat can control all standard, general purpose
HEAT
dampers- (3-wire, 24VAC), and its Open / Close time
is adjustable by the user.
AUTO
CHANGE-OVER
The FMT-24-AZC has also a special option to
ECONOMY
connect a duct temperature sensor, which senses
the airflow temperature and automatically selects
RT40
the mode (Auto-Change-Over).
3-WIRE
OUTPUT
Features
y Flush mount, 24VAC thermostat
y Proportional output for dampers – 24VAC,
3-wire
y Two temperature scales: Fahrenheit or Celsius
y Offset for temperature reading adjustment
y Duct sensor for Auto Change-Over mode –
optional
Wiring diagram
10-2
www.meitavtec.com | [email protected]
y Energy saving – cost efficient, Environmental Friendly
implemented logic
y Set point limits for cooling and heating
y Adjustable open/close time for motor
(10-400 seconds)
y IR Remote Control
Damper Control Solutions
ETN-40P1
Wall mount, room thermostat, with IR-option for
DAMPER
CONTROL
damper control, On/Off to Damper
The ETN-40P1 is a wall mount, thermostat panel,
COOL
functioning as a user interface for damper control.
HEAT
The ETN-40P1 is a smart looking thermostat with a soft
°C
aesthetic shape and a large, easy to read LCD display
* On /Off - 12V signal to damper
EXT.
SENSOR
OPTION
Main input
12VDC
y Control of:
Damper
motor
y Wall mount, 12V thermostat
AUTO
CHANGE-OVER
Wiring diagram
External temperature
sensor (option)
Features
RT03
* Set temperature
y Remote control (RT40) – optional
0
T
M- M+ 8
7
y External Temp. sensor – optional
y Silicon rubber pushbuttons
y Large, easy to read display
y Various panel colors
y Works with DA-401 dampers family
www.meitavtec.com | [email protected]
10-3
Damper Control Solutions
FMH-40P1
Flush mount, room thermostat, with IRoption for damper control, On/Off to Damper
The FMH-40P1 is a flush mount, thermostat panel,
COOL
functioning as a user interface for damper control.
The FMH-40P1 is a smart looking thermostat with
HEAT
a soft aesthetic shape and a large, easy to read
°C
LCD display
Features
y Wall mount, horizontally shaped, 12V thermostat
Wiring diagram
RT03
y Control of:
* On /Off – open/close the damper
* Set temperature
y Timer
y Remote control (RT40) - optional
y Silicon rubber pushbuttons
y Large, easy to read display
y Various panel colors
y Works with DA-401 dampers family
IRP-401
Infra red receiver panel + IR remote Control
for damper control, On/Off to Damper
The IRP-401 is an Infra Red Receiving Panel for
COOL
damper control. 12V operation and power to
Damper.
HEAT
°C
Features
y Control of:
* On /Off
* Set temperature
y Suitable for Meitav-tec's dampers - DA-401
dampers family
y Dimensions – 46 x 38 x 19 mm
10-4
www.meitavtec.com | [email protected]
Dampers
DA-401 - Stand Alone Dampers
VAV
Stand-alone dampers for air flow capacity regulation
and control. Available in 6",8" & 10" diameter
The Stand Alone proportional dampers are the best way to
obtain optimum results from today's air conditioning ducting
systems. They allow you to have complete control over
which rooms at home are air-conditioned or closed, and are
thus energy saving.
Dampers can be operated by two different control devices:
RT40
room thermostats, or by IR receiver with hand held remote
control. Users decide on mode and set point and the
damper will open or close accordingly.
DA-401 dampers are available in 6”, 8” & 10” diameter.
Features
y Main supply - 12VAC
y Two different control options:
y Stand alone proportional damper
* Room thermostat
y Energy saving & environmentally friendly
* Infra Red Receiver + Hand held remote control
Models
Model
Diameter
DA6"-401
6"
DA8"-401
8"
DA10"-401
10"
Main input
230VAC
0
~
PS201P
Wiring diagram
7
8
7
8
Main input
230VAC
0
IR
Receiver
~
12VDC
Room
thermostat
PS201P
7
8
R
-
+
B
M- M+
TJ
J2
12VDC
Damper motor
Application 1 – IR Receiver + Remote contrrol
TJ
J2
12VDC
M- M+
Damper motor
Application 2 – Room thermostat
www.meitavtec.com | [email protected]
10-5
Dampers
DA-24-3W
Stand alone damper –
Air flow regulator & control
3-WIRE
OUTPUT
Available in 6”, 8”, 10” diameter
Damper for climate control are the best way to
regulate airflow in a multi-zoned house, hotel or
office building to improve efficiency and occupant
COOL
comfort.
HEAT
Dampers allow you to have complete control over
which rooms are air conditioned or closed, and are
thus energy saving.
Users decide on mode and set point and the
damper will open or close accordingly.
Dampers are available in 6”, 8” & 10” diameter.
Features
y Main supply - 24V
y Damper control - via room thermostat
y Energy saving & environmental friendly
y Stand alone, proportional damper
y Available in 6”, 8” and 10” diameter
y Proportional, 3 wire open /close
y Damper opening/ closing duration: 8
seconds
Note: These dampers are available also with a Temperature Sensor (DA-24-3W-T series)
Wiring diagram
CL
COM
OP
DA-24-3W
10-6
CL
COM
OP T
DA-24-3W-T
www.meitavtec.com | [email protected]
T
Floor Heating
FE-340-H1
Wall mount, 230VAC thermostat for Floor Heating
HEAT
The FE-340-H1 thermostat for floor heating elements
perfectly suits commercial and residential applications.
ECONOMY
The FE-340-H1 thermostat has been specifically designed
for Floor Heating systems and has an output for Heat
only (16Amp).
The FE-340-H1 is attractively designed, easy to use and
is energy saving solution for Floor Heating applications.
Features
y Main Supply - 230VAC
y Range - 10-30°C
y Output for Heat Element only- 230VAC, 16Amp
y External Sensor- option (TS05 or TS06)
y Offset – for temperature reading adjustment
y Energy saving – cost efficient, environmental
friendly thermostat
y Large, easy to read display
y Soft, silicon pushbuttons
y Neutral, aesthetic color
y Fits into Standard Gewiss Box (GW24 203)
Wiring diagram
www.meitavtec.com | [email protected]
11-1
Floor Heating
FE-340-H1-PAR
Wall mount, 230VAC thermostat, for Floor
HEAT
Heating applications, with Overheat
protection (27°C)
ECONOMY
The FE-340-H1-PAR thermostat for floor heating is
perfectly suitable for higher-end commercial or
residential applications.
The FE-340-H1-PAR-45 thermostat, with an output
for Heat only (16Amp), has been specifically
designed for Floor Heating, parquet systems,
TIMER
where temperature mustn't exceed 27°C
(Adjustable).
RT41
The FE-340-H1-PAR, with its over heat protection
is a simple, yet convenient solution for floor
heating systems.
Features
y Main Supply - 230VAC
y Output for Heat Element only- 230VAC, 16Amp
y Special Floor Temperature Sensor input (T-TO)
for overheat protection
y Overheat Protection- Heat output turns off if
temp. reaches 27°C
Wiring diagram
11-2
www.meitavtec.com | [email protected]
y Energy saving – cost efficient, environmental friendly
thermostat
y Offset – for temperature reading adjustment
y IR remote control – option
y Timer operation (By Remote control)
y Fits into Standard Gewiss Box (GW24 203)
Floor Heating
FE-340-H1-PAR-45
Wall mount, 230VAC thermostat, for Floor Heating
HEAT
applications, with Overheat protection
The FE-340-H1-PAR-45 thermostat for Floor Heating is
ECONOMY
perfectly suitable for higher-end commercial or residential
applications.
The FE-340-H1-PAR-45 thermostat has an output for Heat
only (16Amp) and has been specifically designed for Floor
Heating, parquet systems, where temperature cannot be
allowed to exceed 45°C.
TIMER
The FE-340-H1-PAR-45, with its over heat protection is a
simple, yet convenient and safe solution for floor heating
RT41
systems.
Features
y Main Supply - 230VAC
y Output for Heat Element only- 230VAC, 16Amp
y Special Floor Temperature Sensor input (T-TO) for
overheat protection
y Overheat Protection- HEAT output turns OFF if temp
reaches 45°C
y Energy saving – cost efficient, environmental
friendly thermostat
y Offset – for temperature reading adjustment
y IR remote control – option
y Timer operation (By Remote control)
y Fits into Standard Gewiss Box (GW24 203)
Wiring diagram
www.meitavtec.com | [email protected]
11-3
Floor Heating
FHV-H1-PR-IR
Wall
mount,
230VAC
thermostat,
for
HEAT
Floor Heating applications, with weekly
programming
ECONOMY
The FHV-H1-PR-IR thermostat for floor heating
is
perfectly
residential
suitable
for
applications
commercial
and
has
or
been
specifically designed for Floor Heating systems.
With weekly programming and external sensor
option, the FHV-H1-PR-IR is a simple, yet
PROG
efficient solution for floor heating systems.
TIMER
Features
y Main Supply - 230VAC
y Flush-mount thermostat
y Output for Heat element- 230VAC, 13Amp
y DIP switch selectable display – Tambient and
Tset or Tset only
Wiring diagram
11-4
www.meitavtec.com | [email protected]
y Energy saving – cost efficient, Environmental Friendly
algorithms
y IR remote control – option
y Weekly program (5-1-1)
y Offset – for temperature reading adjustment
RT03
Floor Heating
PS8-FH + ETN-8H
Multi Zone Controller (PS8-FH) + Wall-mount
HEAT
Thermostat (ETN-8H) for Floor Heating applications
EXT.
SENSOR
OPTION
The PS8-FH + ETN-8H multi-zone controller for Floor
Heating elements perfectly suits commercial or residential
°C
applications.
This multi-zone system consists of one main board to
control up to 8 zones and a thermostat. Each zone works
with two temperature sensors; ambient temperature sensor
and floor temperature sensor for floor overheat protection.
The user controls the zones via a wall panel, where each
zone may be individually accessed.
The PS8-FH + ETN-8H with overheat protection feature is
ideal for parquet floors due to its overheat protection logic.
Features
y Main Supply - 230VAC
y Output for up to 8 Heat elements- 230VAC, 1Amp
y ETN-8H- wall-mount thermostat control panel (12VDC)
for up to 8 zones (output from main board)
y Output for up to 8 external temperature sensors (RS01)
for ambient temperature (10°-30°C)
y Output for up to 8 temperature sensors (TS01)
for floor temperature limit
y Overheat protection- unit turns off, if floor
temperature limit is reached
y Floor temperature limit - DIP switch selectable
(27°C, 28°C, 29°C or 30°C)
y Energy saving, environmental friendly system
Wiring diagram
www.meitavtec.com | [email protected]
11-5
Air Quality
GAQ - Air Quality Controller & Sensor Series
Air Quality controller – wall mount, 24VAC, or 12VDC
0-10V
and
OUTPUT
Duct / Room sensor 24VAC or 12VDC
GAQ -12/24
The GAQ series are Air Quality Sensors and Controllers that
automatically react to air pollution sources. They sense
tobacco smoke, toilet odors, strong kitchen smells, etc. and
mechanically regulate ventilated areas such as cinemas,
GAQ Room Sensor
pubs, restaurants, toilets or conference rooms.
The sensor switches the fan on when air quality drops below
a preset, adjustable level. The sensing head of the unit is
self - cleaning, a process which occurs each time the unit is
triggered. When atmosphere has returned to normal, the
GAQ Duct Sensor
fan switches off.
Features
Wall mount, Air Quality Controllers
y Set point for Air Quality - adjustable
y Main supply - 24VAC or 12VDC (with PS)
y Indication lights to show status of Air Quality
controller (On/Off)
y The controller has 3 outputs:
* Proportional output 0-10VDC for variable fan speed
or B.M.S. applications.
y Self cleaning sensor
Room or Duct air quality sensors
* Proportional Output 4-20 mA
y Main supply - 24VAC or 10-30VDC
* Dry contact for direct fan switching (on/off) or
y Sensor has proportional pre-defined output 0-
alarm indication
10VDC
Wiring diagram
GAQ
GAQ Room sensor
GAQ Duct sensor
~
+
0
0
+
0
Main Supply 24VAC
or Main Supply 12-30VDC
Proportional Output
0-10VDC
www.meitavtec.com | [email protected]
12-1
Air Quality
CO Detector
Sensor for measuring carbon monoxide (CO)
concentration
SensiCO PX 300 is a reliable sensor for measuring
carbon monoxide (CO) concentration in locations, such
as car parks and garages.
As CO, a dangerous poisonous gas, has no smell, taste
or color, it is important to install SensiCO PX300, as a
total protection from CO poisoning.
When CO concentration exceeds 50 PPM, a signal to
the ventilation system is activated and an alarm is sent
to the car park management/ control. SensiCO PX 300
may be connected to a self-control system or to the
B.M.S. (Building Management System), using its analog
output.
Features
y Approval / Certification: TÜV per VDI – 2053
(Air treatment systems for car parking)
y Detection principle: Electro-chemical
y Humidity range: 15 - 95% relative humidity, non
condensating
y Operation: Continuous
y Signal: 4-20 mA, max. load 300
y Gas entry: by diffusion
y Connection: 2 – wire
y Measuring range: 0-300 ppm CO in air
y Zero adjustment: Automatic, calibration free
y Reproducibility : < 3 ppm
y Sensitivity adjustment: via potentiometer
y Response time 90: < 60 sec
y R.F.I According EN 50 081-1 resp.
y Cross sensitivity: < 2% on 300 ppm CO
according VDI 2053
y Linearity: < 2% on 300 ppm CO according VDI
2053
Wiring diagram
12-2
y Operating temperature range: -10°C to +40°C
www.meitavtec.com | [email protected]
EN 50 082-2 B
y Filter: For dust and water protection
HVAC Analyzers
M4000MD
HVAC Analyzer, measures inlet and outlet variables,
for an intelligent analysis of HVAC performance
HUMIDITY
The M4000MD HVAC Analyzer is a diagnostic instrument
for a wide range of applications.
It consists of two units; a large LCD display and a hand held
sensor connected by a coiled command cable.
The M4000MD measures all HVAC inlet and outlet
variables, allowing for an intelligent analysis of system
performance.
The M4000MD is an excellent tool for every HVAC
technician allows readings both in Metric or English values.
Features
y The M4000MD measures:
y Allows measurement of Rectangular and
Round Grills
*
Temperature (°C/°F)
*
Humidity (%RH)
y Three, simple keypads operate all functions
*
Dew Point (°C/°F)
y Low Battery Indication
*
Air Velocity (FPS or M/S)
*
Air Volume (CFM or M³/S)
*
Energy Capacity in BTU/HR or KW
y Direct Read-out – no additional calculations needed
y Audible and Visual Prompts
y Memory holds cumulative volume and power
measurements for multi grills calculations
y 9V Battery Operated
www.meitavtec.com | [email protected]
13-1
Special Controllers
EC-300
230VAC, Energy Controller for energy saving in offices
AC
or hotel rooms. Turns off/on HVAC + lighting systems
per presence in a room via an Occupancy Sensor and
optional Contact Inputs
The EC-300 is a smart Energy Controller, which offers
substantial energy saving of Air Conditioning & Lighting
operation in hotel bedrooms, offices or conference rooms.
ECONOMY
Since hotel bedrooms have different needs from offices
+
regarding occupancy changes, the EC-300 allows different
configurations for them. In both applications, presence
detection is achieved via an Infra Red Occupancy sensor; if
the IR sensor detects no presence within a certain,
configurable time, the EC will cut off electricity to HVAC &
Lighting systems. Upon detection, EC will automatically re-operate the systems. Further energy saving is achieved
by cutting off electricity to HVAC system if someone opens the window, or if set temperature exceeds the Limit Cool
or Limit Heat. For Hotels, additional Contact Input, a door switch, or other Normally Closed input is employed to
stop HVAC, Lighting or both.
Available also in 24VAC version
Features
y Power supply - 230VAC, 10A for HVAC operation
y Detects presence based on an IR Occupancy sensor +
Contact Inputs on door entry or window
y Easy, quick installation at voltage line, between an
existing HVAC & lighting system and Power Supply
y Inputs:
* IR Occupancy sensor – turns off HVAC and lights
after adjustable time, separate for HVAC and lights
* Window contact (X2) – N.O. or N.C selectable
* Door switch – enables special logic for hotel rooms
* Temperature sensors – enable Temperature Limits,
Cool & Heat set limits are adjustable
y EC installation requires no modification in
the existing room devices
y No decline in convenience to user
y Controller supplies 12VDC voltage to IR
sensor
y EC set contains Controller + IR sensor
y DIP switch selectable options:
* Hotel or Office configuration (Door switch
active or not for logic)
* With or without compressor delay
* Window contact configuration (N/O or N/C)
y Maximum energy saving
Wiring diagram
www.meitavtec.com | [email protected]
14-1
Special Controllers
TLC
230VAC, Temperature Limit Controller for energy
saving. Turns off/on compressor as per adjustable
temperature limits.
The TLC is a simple, yet efficient Temperature Limit
ECONOMY
Controller which offers substantial energy saving of Air
Conditioning by limiting ‘Set Temperature’.
COMPRESSOR
DELAY
The TLC is compact and easy to install at any existing AC
system by connecting the compressor relay line to the TLC,
the TLC overrides the AC control system and therefore can
limit the Cool/Heat set points.
Limit Cool & Limit Heat values are configurable. If ambient
temperature from the return air sensor exceeds the
predefined limits, the compressor will stop working. The TLC
will automatically re-operate the compressor according to
these values.
The TLC allows significant energy saving in both commercial
or residential applications while investment is minimal and
installation is quick and simple.
Available also in 24VAC version
Features
y Energy Saving, cost effective Controller
y Adjustable temperature limits for Cool / Heat
using 2 manual knobs
y Power supply - 230VAC for HVAC operation
y Easy, quick installation for any existing AC
y 1A, 230Vac dry contact for compressor relay
Wiring diagram
14-2
www.meitavtec.com | [email protected]
y With or without compressor delay
(to protect compressor) – jumper selectable
y TLC installation requires no modification in the
existing room devices
y No decline in convenience to user
y Return On Investment (ROI) is fast
Special Controllers
Lead-Lag Controller
Lead-Lag Controller for 2 complete units, with
AC
On/Off cycling every 24 hrs.
The Lead-Lag controller is the most efficient way of
COOL
controlling temperature in a remote location where
both a primary cooling unit and a back-up cooling unit
are used.
EXT.
SENSOR
OPTION
The Lead-Lag controller controls 2 different units,
treating them as 2 different stages, and allows them
to cycle On and Off every 24hrs. This ensures that the
TIMER
desired room temperature is always maintained and
also prevents wear of the units.
COMPRESSOR
DELAY
With a 4°C differential kept always between room
temperature and set temperature, the Lead-Lag
controller is ideal for environments, such as computer
rooms and other rarely visited rooms.
Features
y Main Supply - 230VAC
y Auto switch-over from one unit to the other every
24 hrs.
y In Auto mode, the 2 units (on-duty and off-duty) are
treated like 2 stages
y On-duty unit compressor cycles between “On” and
“Off” depending on room temp. and set temp.
y Manual switch-over (3 positions) between “Auto”,
“Off” and “Manual”
y Display of ambient temperature on a
wall-
mount room thermostat (ETN).
y Fault indication when ambient temperature rises
above 28°C.
y External sensor for ambient room temperature.
y Time delay for compressor protection
y 4°C always maintained between room temp and set
temp- off-duty unit will start operating, if necessary.
Wiring diagram
www.meitavtec.com | [email protected]
14-3
Special Controllers
M6000-T1-T2-AN
230VAC, Multi Stage Controller, with 6 programmed
outputs + analog inputs, for large applications
The M6000-T1-T2-AN controller is the best multi-stage
COOL
display controller on the market today. As opposed to many
complicated units, the M6000-T1-T2-AN makes it incredibly
HEAT
easy to pre-set stages and all other parameters. This, plus
the 6 individually programmed outputs, gives users a unique
ability to “custom-build” their entire HVAC control system.
The M6000-T1-T2-AN offers the following:
* 6 outputs- fully programmable
* 2 outputs for On Indication (may activate fan)
TIMER
* Input for 2 temperature sensors to be used
separately for each output (Meitav-tec's sensors)
* Analog Inputs (0-10VDC) to be used separately for
each output (humidity, pressure, water flow, etc)
PROG
The M6000-T1-T2-AN is suitable for even the largest of
M6000 (12V) + PS104
applications, such as chillers and big air-handling units.
ECONOMY
EXT.
SENSOR
OPTION
Features
* Logic for output- Cool or Heat
Main Supply - 230VAC with power supply
Ex: Humidifier- If Heat is selected, output
Range temperature from 0°C-65°C
will be activated only if set point is Higher
Range set point for each output 0°C-60°C
than actual humidity
* Compressor delay – Yes or No
y 6 programmable outputs, each output corresponds to a
stage. Parameters that can be set are:
y Analog input can be set for different scales
* Set point
(0 to 100 as % or 0 to adjustable)
* Input to operate by: Analog, T1 or T2 (2 different
y Fault input – Normally Open (all unit OFF)
temperature sensors) – inputs may be combined
Energy saving – cost efficient, environmental
friendly controller
* Differential (T between stages)
y All outputs have Random start
14-4
www.meitavtec.com | [email protected]
Analog input
(option)
T2 Sensor
(option)
T1 Sensor
(option)
230VAC
Main input
ON Indication
(fan)
Out 6
Out 5
Out 4
Out 3
Out 2
Out 1
Wiring diagram
COMPRESSOR
DELAY
Special Controllers
FCC_01 - Free Cooling Controller
Wall mount, 230VAC controller, for Cooling
AC
with outside fresh air – saves energy and
refreshes room air.
FC
Meitav-tec's 'Free Cooling' controller offers a simple,
energy saving solution to control room temperature.
COOL
'Free Cooling' is virtually a Cool Only thermostat,
which serves as a complementary to an existing
DAMPER
CONTROL
HVAC control system. The thermostat is designed to
EXT.
SENSOR
OPTION
take advantage of natural resources to cool room
temperature; if outside temperature is cooler than
ambient then the Free Cooling thermostat sends a
signal to open a window or a damper to let fresh,
cool air come in, and cool the room.
Features
y Wall mount – 230VAC thermostat
y Difference between ambient and room temperature,
y Open / Auto / Close switch (for damper, fan or
window)
to open the window, is jumper configured (Default is
1°C)
y External / Internal room sensor – jumper
y Energy saving controller
y Aesthetic shaped controller
selectable
y Outside temperature sensor input
y Can work as a “stand-alone” or next to another
HVAC system
Wiring diagram
T
HI RE
T
LO ME
230VAC
power
supply
0
output
3A
0 ~
~
room
temp.
outside
external
temp.
sensor
sensor
(option)
Free Cooling
www.meitavtec.com | [email protected]
14-5
Sensors and Accessories
DT-02 Duct Sensor
Duct sensor in a plastic enclosure
Suitable for all Meitav-tec's thermostats
Features
y Dimensions:
y Range - -40°C to 110°C ; 39°F to 230°F
*
width - 45 mm
*
height – 38 mm
*
depth – 20 mm
y Thermistor type - NTC
*
rod length – 155 mm
y Standard – UL94V-0
y Measurement accuracy - ±3%
y Weight: 14 gr.
y Color – white
y Resistance – 25C; 77F = 50 K
y Plastic - ABS
y Thermal Time Rate – 15 seconds
Wiring Diagram
www.meitavtec.com | [email protected]
15-1
Sensors and Accessories
GHU Room/Duct Sensor
General purpose stand-alone humidity and
0-10V
temperature sensor for room or duct.
OUTPUT
GHU Room Sensor
The GHU Room or Duct sensors are general
purpose, all-in-one™ sensors for both
temperature and humidity.
HUMIDITY
Humidity measurement is given as a proportional
output, 0-10VDC while temperature reading may
be given in one of two ways:
1.
Normally via a thermistor (for
controllers that do not offer 0-10VDC
temperature inputs- temperature sensor
used must be Meitav-tec type)
2.
GHU Duct Sensor
As a proportional signal (0-10VDC)
With wide temperature and humidity ranges,
the GHU Room / Duct sensors are practical and
ideal solutions for all room and duct applications.
Features
y Main Supply – 24VAC or 12VDC
y Proportional temperature output- 0-10VDC
y Proportional humidity output- 0-10VDC
Wiring Diagram
0
Temp. 0-10V
Hum. 0-10V
Temperature
sensor
15-2
www.meitavtec.com | [email protected]
y Temperature set point range from 0°C-60°C /
32°F-140°F (0-10VDC)
y Humidity set point range from 15%-90% RH
(0-10VDC)
Sensors and Accessories
TS-01 & TS-02 Temperature Sensors
TS-01 External Temperature Sensor, 80 cm cable
TS-02 External Temperature Sensor, 180 cm cable
Features
y Cable 2 wire – AWG 24 BLACK
y Thermal Time Rate – 15 seconds
y Thermistor color – silver or brass
y Range - -40°C to 110°C ; 39°F to 230°F
y Dims of Thermistor 1" x 0.25" (2.5 cm x 0.6 cm)
y Thermistor type - NTC
y Resistance – 25C; 77F = 50 K
TS-05 & TS-06 Temperature Sensors
TS-05 External Temperature Sensor, 80 cm cable
TS-06 External Temperature Sensor, 300 cm cable
Thermistor is coated with isolating plastic.
Other technical specifications are the same
as TS-01 & TS-02.
www.meitavtec.com | [email protected]
15-3
Sensors and Accessories
RS-01 Temperature Sensor
External Temperature Sensor in a decorative box
External temperature sensor in a wall mount, decorative
box. Suitable for all Meitav-tec's thermostats
Features
y Cable 2 wire – AWG 24 BLACK
y Thermal Time Rate – 15 seconds
y Dimensions – 1.8" x 1.5" (46 mm x 38 mm)
y Range - -40°C to 110°C ; 39°F to 230°F
y Resistance – 25C; 77F = 50 K
y Thermistor type - NTC
RS-02 Average Temperature Sensor
Average Temperature Sensor in a decorative box
y Ideal for wide, open space hall where temp. differs
in each location
y 2 units required for average measurement of Temperature
y Provides average room temperature, using
external sensors, installed in two different locations
y Each temperature sensor installed in a wall-mount,
decorative box
y Suitable for all Meitav-tec's thermostats
y Technical Specifications are the same
as RS-01.
15-4
www.meitavtec.com | [email protected]
Sensors and Accessories
RT03 Remote Control
Hand held remote control unit, for Meitav-tec's
thermostats and controllers.
HEAT
An infra-red remote controller, suitable for Meitav-tec's
thermostats and receivers. Easy-to-use, with big LCD and
a large temperature digit display.
Features
TIMER
y On/Off
y Timer - Start / Stop
y Modes: Cool / Heat / Auto-change-over / Fan only
y Real time clock & day
y Fan speeds: High / Medium / Low / Auto
y 2 X AAA battery operated
y Temperature set point
y Elegant Housing for wall mounting
y °C or °F temperature scale
y Available in black or white panel
RT04 Remote Control
Hand-held remote control for programmable
COOL
thermostats, with USA weekly program
HEAT
An infra-red, remote controller, suitable for programmable
thermostats. Easy-to-use, with big LCD and a large
temperature digit display, °F display.
PROG
Features
y On/Off
y Up to 6 different weekly programs
y Modes: Cool / Heat / Auto change-over / Fan only
y Timer
y Temperature set-point
y Real time clock
y °F temperature scale
y 2 X AAA battery operated
y 2 or 4 periods a day, each with a different set point
y Available in black or white panel
TIMER
www.meitavtec.com | [email protected]
15-5
Sensors and Accessories
RT05 Remote Control
COOL
Hand-held remote control for programmable
thermostats, with European weekly program
An infra-red, remote controller, suitable for programmable
thermostats. Easy-to-use, with big LCD and a large
temperature digit display, °C display.
°C
Features
y On/Off
y Up to 6 different weekly programs
y Modes: Cool / Heat / Auto change-over / Fan only
y Timer
y Temperature set-point
y Real time clock
y °C temperature scale
y 2 X AAA battery operated
y Up to 4 start /stop a day, each with a different set
y Available in black or white panel
TIMER
point
RT40/41 Remote Control
DAMPER
CONTROL
Hand-held remote control for stand-alone
dampers,
for Meitav-tec’s receivers
COOL
An infra-red remote controller, suitable for stand-
HEAT
alone dampers. Easy-to-use, with big LCD and a
large temperature digit display.
Features
y °C or °F temperature scale
y On/Off
y Modes: Cool / Heat
y Temperature set point
y Elegant Housing for wall mounting
y Timer - Start / Stop, hour & minute display
y Available in black or white panel
y 2 X AAA battery operated
15-6
y Real time clock & day
www.meitavtec.com | [email protected]
Power Supplies
PS-102
230VAC – 12VDC, Power Supply
The PS-102 is a power supply for HVAC system. It converts 230VAC to 12VDC for thermostat operation and
through relays, transfers commands from thermostat to operate 230VAC HVAC system.
It offers 7 relay outputs to control HVAC system and 3 inputs for Temperature Sensors.
Features
Wiring Diagram
y Main Supply - 230VAC
PS102
y 7 x 230VAC outputs – each 6A (resistive), or 3A
(inductive), total 9A
y 7 x 12VDC inputs
y 3 inputs for temperature sensors
To thermostat
(12VDC)
y Inputs & outputs are terminal blocks, screw connector
y PS-102 is supplied in a plastic enclosure box
12VDC supply
(to thermostat)
21
RL 7
17
1
22
RL 6
16
18
2
RL 5
15
3
RL 4
14
4
RL 3
13
5
RL 2
12
6
RL 1
11
7
+
8
+
POWER
SUPPLY
12VDC
9
Sensors
10
Fuse
10A
~
0
20
To system
(230VAC)
230VAC
Main input
T1 T1 T2 T2 T3 T3
Sensors
PS-24
24VAC - 230VAC –Power Supply
Ideal for 230VAC Fan operation in 24VAC HVAC systems
The PS-24 is a power supply for HVAC system. It converts 24VAC to 230VAC thorough relays for fan operation and
transfers commands from thermostat to operate 24VAC HVAC system. All in all, it offers 3 relay 230VAC outputs to
control HVAC fan system and 4 x 24VAC inputs, directly transferred to 24VAC outputs.
Features
Wiring Diagram
y Main Supply - 230VAC
y 3 x 230VAC outputs + 4 x 24VAC outputs
y 7 x 24VAC inputs + 1 Temperature input
y Inputs & outputs are terminal blocks, screw connector
y PS-24 is supplied in a plastic enclosure box
www.meitavtec.com | [email protected]
16-1
Power Supplies
PS-104
230VAC – 12VDC, Power Supply
The PS-104 is a power supply for HVAC system. It converts 230VAC to 12VDC for thermostat operation and
through relays, transfers commands from thermostat to operate HVAC system.
It offers 8 relay outputs to control HVAC system and 3 inputs for Temperature Sensors.
Features
Wiring Diagram
y Main Supply - 230VAC
y 8 x 230VAC outputs – each 6A (resistive), or
3A (inductive), total 9A
y 7 x 12VDC inputs
To thermostat
(12VDC)
y 3 inputs for temperature sensors
y Inputs & outputs are terminal blocks, screw
12VDC supply
(to thermostat)
connector
22
RL
8
18
21
RL
7
17
3
RL
6
14
1
RL
5
16
2
RL
5
15
4
RL
3
13
5
RL
2
12
6
RL
1
11
7
+
8
-
9
Sensors
10
+
POWER Fuse 10A
SUPPLY
12VDC
~
0
20
T1 T1 T2 T2 T3 T3
Sensors
PS-600
230VAC – 24VDC, Power Supply
Ideal for 230VAC HVAC units operated by 24VAC
The PS-600 is a power supply for HVAC system. It converts
230VAC to 24VDC for thermostat operation and through relays,
transfers commands from thermostat to operate the 230VAC
HVAC system.
It offers 6 relay outputs to control HVAC system controllers
Features
y Main Supply - 230VAC
y 6 x 230VAC outputs – 3 outputs 3A and 3 outputs 1A
y 6 x 24VDC inputs
y 10 direct input-output connections low Voltage (24V)
y Inputs & outputs are terminal blocks, screw connector
y PS-600 is supplied in a plastic enclosure box
16-2
www.meitavtec.com | [email protected]
Wiring Diagram
To system
(230VAC)
230VAC
Main input
CTU
Communication Controller
230VAC, 115VAC, 24VAC
Specifications
Temperature Range
Accuracy
+1˚
Weight
0.545 Kg
Plastic
PC/ABS
Color
gray
Flammability
UL94V-0
204
.5 m
m
92
mm
www.meitavtec.com | [email protected]
B-1
ERT
Wall mount thermostat
230VAC
Specifications
Temperature Range
10°C ÷ 30°C , 50°F ÷ 86°F
Accuracy
±1°C
Weight
0.25 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white
Temperature Input
50K@25°C
83mm
45mm
B-2
www.meitavtec.com | [email protected]
30mm
ETN (non programmable)
Wall mount thermostat/panel
24VAC, 12VDC
Colors
white silver black gold
others
Accessories
TS01
RS01
RS02
WP4
RS03
Specifications
Temperature Range
10°C ÷ 30°C, 50°F ÷ 86°F
Accuracy
±1°C
Weight
0.25 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white, silver, black, others
Temperature Input
50K@25°C
80mm
Front view
Side view
92mm
22mm
80mm
www.meitavtec.com | [email protected]
B-3
ETN (programmable)
Wall mount thermostat/panel
24VAC
Colors
white silver gold black others
Accessories
TS01
RS01
RS02
Specifications
Temperature Range
5°C ÷ 35°C
Accuracy
±1°C
Weight
0.125 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white, silver, black, others
Temperature Input
50K@25°C
80mm
B-4
www.meitavtec.com | [email protected]
Front view
Side view
92mm
22mm
80mm
WP4
RT03
FMH
Flush Mount thermostat/panel
24VAC, 220VAC, 110VAC
Colors
white silver gold black
others
Accessories
TS01
RS01
RS02
DT02
RT03
Specifications
Temperature Range
10°C ÷ 30°C , 50°F ÷ 86°F
Accuracy
±1°C
Weight
0.200 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white, silver, black, others
Temperature Input
50K@25°C
Front view
Side view
Back view
6mm (max)
118mm
75mm
C
O
80mm
ON
Cool Hi
Heat Med
Lo
ON
OFF
MODE
53mm
FAN
35mm
(inside the wall)
www.meitavtec.com | [email protected]
B-5
FMT(non programmable)
Flush mount vertical thermostat/panel
24VAC , 220VAC, 110VAC
Accessories
TS01
RS01
RS02
Specifications
Temperature Range
10°C ÷ 30°C, 50°F ÷ 86°F
Accuracy
±1°C /±1.5°F
Weight
0.200 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white
Temperature Input
50K@25°C / 77°F
Front view
80mm
Side view
Back view
6mm (max)
53mm
118mm
75mm
ON
SELECT
35mm
(inside the wall)
B-6
www.meitavtec.com | [email protected]
RT03
MIGA
Main Controller ALL-IN-ONE™
230VAC
Accessories
ETN-Miga
FMH-Miga
TS01
MP101
M1P
RT03
Specifications
Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.400 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
www.meitavtec.com | [email protected]
B-7
PS (Communication Controller)
Main Controller
230VAC, 115VAC, 24VAC
Accessories
FMH-X500
IRP-X500
FMT-X500
ETN-X500
RS01
RS02
Specifications
B-8
Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.340 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
www.meitavtec.com | [email protected]
RS03
TED (without display)
Wall mount, mechanical thermostat
220VAC, 24VAC
Accessories
TS01
RS01
RS02
WP1
Specifications
Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.150 Kg
Plastic
PC/ABS
Scale
°C
Flammability
UL94V-0
Color
white
Temperature Input
Thermistor 50K@25°C
125mm
106mm
10mm
www.meitavtec.com | [email protected]
30mm
B-9
TED (with display)
Wall mount, mechanical thermostat
220VAC, 24VAC
Accessories
TS01
RS01
RS02
WP1
Specifications
B-10
Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.150 Kg
Plastic
PC/ABS
Scale
°C
Flammability
UL94V-0
Color
white
Temperature Input
Thermistor 50K@25°C
www.meitavtec.com | [email protected]