Download manuales

ScaleResource.com
11.15 CAL
12. CAL d cal done
13. F1.3 0 expanded display, 0 is normal, 1 is expanded.
14.Push Print until SAVE is displayed and push Print
again. If Abort or dFAULT is displayed push Function
until Save is displayed.
TOLEDO PANTHER
1.
2.
3.
4.
5.
6.
7.
Open up the indicator and close SW1-1
Press Enter and Zero simultaneously.
F1 will be displayed, Press ENTER.
Press SELECT until F1.2 is displayed
This is Cal units, 1 is lb, 2 is kg.
Press ENTER
Press SELECT to go to CAL, display should read CAL
1 then press ENTER, use SELECT to toggle to 1.
8. E SCL empty scale press enter.
9. 15 CAL delay
10.Add Ld Place test weight on scale. ENTER.
11.000000 Enter test weight value
12.15 CAL
13.CAL d cal done
14.F1.6 x zero cal adjust 0 is skip, 1 to store, press
clear to abort.
15.F1.7 x Span cal adj.,
16.Press clear to exit.
TOLEDO 8140
1.
2.
3.
4.
Jump W2
Push TARE and CLEAR at the same time.
PRINT will enter and advance.
Advance to CAL C1.
27