Download Cyclades AlterPath OnBoard System information

Configuring Private Subnets and Virtual Networks
6. Make sure that users who are authorized for native IP are also authorized
for PPTP connections.
Configuring Private Subnets and Virtual
Networks
The administrative user performs configuration on the Network → Private
subnets screen after deciding which addressing scheme to use, as discussed
here and in more detail in Appendix , ‘Advanced Device Configuration” on
page 345.” For introductory information, see also “Device Configuration” on
page 46.
The Web Manager Network → Private subnets screen appears as shown in the
following figure.
Figure 8-14:Network → Private Subnets Screen
The administrator must define at least one subnet, as described under “Adding
Private Subnets” on page 279.
In certain cases, he administrator may also need to define a virtual Destination
Network Address Translation (DNAT) network, as described under
“Configuring a Virtual Network (DNAT)” on page 281.
Adding Private Subnets
The administrator must define at least one subnet to enable devices that are
connected to the OnBoard’s private Ethernet ports to communicate on the
Web Manager "Network" Menu Options
279