Download Agilent Technologies 4339B Instruction manual

Specications
4339B
Measurement Support Functions
Display
40-digit 2 2-lines LCD display. Capable of displaying:
measurement values, comparator/contact check decisions, comparator limits, control settings,
self test messages, and annunciators
Correction
OPEN correction
Eliminates measurement errors due to stray capacitance in the test cable and residual
resistance in the test xture.
Self calibration:
Calibrates the instrument oset errors due to the change of ambient temperature.
Test Sequence Program:
Controls a series of measurements (charge-measure-discharge). Charge time, measurement
interval time, and the number of measurements can be programmed.
Mathematical Functions
The deviation and the percent deviation of measurement values from a programmable
reference value can be displayed.
Comparator
HIGH/IN/LOW for the measurement parameter.
Contact Check
Contact failure between the test xture and device can be detected.
Available DUT type: Capacitive DUT only
GPIB Interface
All control settings, measurement values, self-test results, and comparator information can be
controlled or monitored via GPIB.
Handler Interface
All output signals are negative logic, opto-isolated, open collector outputs.
Output Signals Include:
HIGH/IN/LOW and no contact, index, end-of-measurement, and alarm.
Input Signals Include:
High voltage OFF, keylock, and External trigger
Save/Recall
Ten instrument setups can be saved and recalled from the internal non-volatile memory.
8-6 Specications