Download MTD 700 Series Technical data

UPS MTD 700 / 1000 / 1500 / 2000 / 3000
1.8
Introduction
Positioning
Do not install in an area in which combustible vapours result e.g. from
petrol tanks, engine compartments, etc.
The UPS is designed for operation in ventilated rooms with a surrounding temperature of 0 ° to 40 °C.
If the UPS is exposed to severe and quick temperature changes, there is danger of condensation. Before you take additional steps, an acclimatisation period of at least 2 hours is to be observed.
Never place or operate the device in a moist environment. Keep liquids away
from the device.
The UPS may not be placed in the vicinity of heat sources.
It is to be placed in a horizontal position.
Ensure that the rear side and the front side of the device are at least 10 cm
from other objects for ventilation in order to prevent trapped air and too much
warming. Ensure that the air openings cannot be covered, e.g. through drawnin paper, fabric, etc.
MTD Series
13