Download Manual - Ideal

SERVICING
41 BOILER CASING REMOVAL
1. Undo the upper front retaining screw (A).
2. Undo the LH and RH side nuts and locking nut retaining
the plastic fascia board (B), remove and place on one
side.
3. Release the four fixing clamps on the upper and lower
positions (2 + 2) (C).
A
4. Lift and remove casing (D).
C
5. Place the removed casing to one side to avoid damage.
D
D
SERVICING
C
B
42 CONTROL HOUSING ACCESS
1.
2.
3.
Remove the casing (see Frame 41).
Remove the 3 screws keeping the control housing in
place.
Pull down and swing the housing.
3
2
2
2
BOXER combination boiler - Installation and Servicing
29