Download Bay Networks Event Manager Specifications

Module Configuration View
Module Attachment Table
Attachments
Displays the total number of backplane network attachment points on the
module.
Attachment Changes
Displays the total number of attachment changes for the module detected
since cold/warm start of the agent or since the insertion of the module.
Last Attachment Change
Displays the value of SysUpTime when the last attachment change on the
module was detected. If no change has been detected since cold/warm start of
the agent, the value is zero.
Configuration Source
Displays the source of the configuration at the last module reset. Table 3-4
details the possible configuration values.
Table 3-4.
Configuration Source Values
Value
Description
other
unknown or some other value
dfltJmpr
default jumpers
prmMem
permanent memory on the module
brdCfg
saved configuration on the module
sm
supervisor
smDfltJmpr
SM and default jumpers
smPrmMem
SM and permanent memory on the module
Configuration Changes
Displays the total number of configuration changes for the module detected
since the cold/warm start of the agent or since the insertion of the module.
Set Current Attachment For All Attachments
Allows you to change the current attachments. Posible values are SEG 1-3 or
ISOL.
Module Attachment Table
This table displays information on the attachment points on the boards in the
chassis. It contains the following information:
Attachment
Displays the index number of the attachment point on the board.
90302292 E3
Configuration Views
3-5