Download Installation and Reference for the BayStack 150

Transcript
8931021.BK Page 7 Thursday, August 14, 1997 12:08 PM
Initializing the Network Management Module
Boot File Configuration Menu
Unit: 1
BayStack150 Ethernet NMM
NI Configuration and Image Files
Boot Server: 0.0.0.0
Boot Router: 0.0.0.0
Config File: [None]
Image File: [None]
a - Set configuration file
e - Set image file
[Esc] - Return to previous menu
|
|
r - Set boot router address
s - Set server address
Enter command:
Figure 4-3.
5.
Boot File Configuration Menu
Press a to select Set configuration file.
Enter the path where the configuration file is stored and the name of the
configuration file (for example, eftpboot/6150.100.cfg).
6.
Press e to select Set image file.
Enter the path where the image file is stored and the name of the image file
(for example, /eftpboot/6150.100.img).
7.
Press r to select Set boot router address.
Enter the IP address of the boot router (for example, 10.10.3.1).
8.
Press s to select Set server address.
Enter the address of the server where the image and configuration files are
stored (for example, 10.10.3.200).
9.
Press [Esc] to return to the Boot Main Menu, as illustrated in Figure 4-2.
10. Press j to display the IP Configuration Menu, as illustrated in Figure 4-4.
893-01021-A
4-7