Download Cisco Nexus 5010 Installation guide

Chapter 2
Installing the Cisco Nexus 5000 Switch
Removing and Installing Components
Send documentation comments to [email protected]
Install a blank power supply filler panel if the power supply bay is to remain empty.
Figure 2-11
Removing the Power Supply for the Cisco Nexus 5020 switch
Figure 2-12
Removing the Power Supply for the 5010
273163
Step 4
Installing a Power Supply
To install a power supply, follow these steps:
Step 1
Ensure that the system (earth) ground connection has been made. For ground connection instructions,
see the “Grounding the System” section on page 2-10.
Cisco Nexus 5000 Series Hardware Installation Guide
2-22
OL-15902-01