Download Sharp AR-F14 Specifications
Transcript
[04]OPERATIONALDESCRIPTION.fm 8 ページ 2004年4月19日 月曜日 午後1時37分 B.Stapling Operation C.Delivery Operation after Stapling When stacking and alignment of paper on the processing tray are complete, the finisher controller PCB drives the paddle motor (FPM) in the reverse direction and lowers the swing guide. When the swing guide descends, the paper stack is sandwiched between the upper and lower stack delivery rollers. The finisher controller PCB moves the stapler for stapling according to the specified stapling position (when rear 1-point stapling is specified, the stapler does not move but it staples at the standby position). As the stapler moves forward, the processing tray stopper is folded forward. When stapling is complete, the finisher controller PCB drives the deliver motor in the forward direction to feed the paper stack (sandwiched between the stack delivery rollers) in the delivery direction. The delivery belt home position sensor is turned OFF. The delivery motor is driven a specified number of pulses, causing the swing guide to ascend. At the same time, the slide motor is driven to return the stapler back to the standby position, followed by driving of the delivery motor. Then, the paper stack is delivered with the nails of the delivery belt that rotates in sync with the stack delivery rollers. Paper stack Paper stack Swing guide Stack delivery roller (upper) Swing guide Processing tray stopper Stapler Delivery tray Stapler Delivery tray Stack delivery roller (lower) Delivery belt Stack delivery roller (lower) Fig.F02-302-01 Fig.F02-303-01 Swing guide home position sensor (ARHPS) Paddle motor (FPM) Swing guide home position sensor (ARHPS) Light-shielding plate Paddle motor (FPM) Light-shielding plate Staple safety switch (SSS) Staple safety switch (SSS) Swing guide Stack delivery roller (upper) Swing guide Stack delivery roller (upper) Stack delivery roller (lower) Stack delivery roller (lower) Fig.F02-302-02 Fig.F02-303-02 AR-F14/PN1 OPERATIONAL DESCRIPTION 4-8