Download Sharp AR-F14 Specifications

[01]INTRODUCTION.fm 1 ページ
２００４年４月２８日　水曜日　午後４時５９分
[1] INTRODUCTION
1. Product outline
This unit is installed to the following machines to perform the after-process of output paper from a copier, or a fax machine.
1) Employment of the through-type stapler
Employment of the through-type stapler allows to make saddle stitch by one stapler.
2) 3 kinds of auto staple functions
There are 3 staple positions available. (One position in the front, one position at the back, 2 positions at the center)
3) Saddle stitch function
Up to 10 sheets of paper can be stapled at the center and folded into two and discharged.
4) Punch function (Option)
By installation of a puncher unit, paper can be punched to make holes for a binder. (Applicable for 64 - 128g/m². OHP films cannot be used.)
Applicable models
AR-M237 / M277, AR-M236 / M276
2. Configuration
1. When installing this machine, the exclusive-use table (large) or the exclusive-use table (small) + the multi-stage paper feed unit
(AR-D21 or AR-D22) must be attached to in advance.
2. This unit cannot be installed with the following units:
•Finisher (AR-FN5N)
3. Specifications
A. AR-F14
(1) Basic specifications
Type
Transport speed
Transport reference
Tray type
Upper tray
(Number of trays) Lower tray
Paper exit direction
Paper exit paper size
Console type finisher
23/26/27 ppm
Center reference
Lift-up/down offset tray
Book tray for saddle stitch
Face down
A3, B4, A4, A4R, B5, B5R, A5,
11" x 17", 8.5" x 14", 8.5" x 13",
A5/Invoice R inhibited
A5/Invoice horizontal allowed
8.5" x 11", 8.5" x 11"R,
5.5" x 8.5"
Power consumption
60W or below
Power source
Supplied from the machine power
(DC24V, 2.5A)
External dimensions (W x D x H) 661 x 603 x 1016 (mm)
Occupying dimensions (W x D) 712 x 603 (mm)
Weight
About 38kg
(2) Finishing section
Capacity of
paper exit and
load
Non-staple
*1,000 sheets (Small size)
500 sheets (Large size)
Staple sort
*30 sheets
* Equivalent to 64g/m² of paper
Max
1,000 sheets (Small size)
500 sheets: (Large size)
Less than 1,000 sheets and less than 30 copies
depending on the use environment and paper curl.
Large size
A3, B4,
11" x 17", 8.5" x 14", 8.5" x 13"
Small size
A4R, B5, B5R, A5,
8.5" x 11", 8.5" x 11"R, 5.5" x 8.5"R
Offset function
Provided
Paper size which A3, B4, A4, A4R, B5, B5R,
can be stapled
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R
Kinds and
Normal paper 60 - 128g/m² (16 - 34lbs)
weights of paper Index paper
176g/m² (47lbs)
to be discharged Cover paper
200 g/m² (54lbs)
Quantity of paper 50 sheets
to be stapled
(Small size, 128g/m² x 2 + 80g/m² x 48)
(Max.)
25 sheets (Large size, 80g/m² x 25)
Large size
A3, B4,
11" x 17", 8.5" x 14", 8.5" x 13"
Small size
A4, A4R,
8.5" x 11", 8.5" x 11"R, B5, B5R
Stapling
3 kinds
(One in the front, one at the back: two positions)
two positions A3, B4, 11" x 17", 8.5" x 14",
8.5" x 13", A4, 8.5" x 11", B5, B5R
one at the back A3, B4, A4, A4R, B5, B5R
one in the front 11" x 17", 8.5" x 14", 8.5" x 13",
8.5" x 11", 8.5" x 11"R, B5, B5R
Staple supply
Staple cartridge replacement
Staple detection Staple empty Provided
detection
Cartridge
Provided
empty
detection
Staple jam
Provided
detection
(3) Saddle stitch section
Stapling type
Stapling position
Weight of paper applicable for
saddle stitch
Paper size
Center stapling: Center folding
120mm pitch from the paper center
A3, A4R, B4,
11" x 17", 8.5" x 11"R
64 - 80g/m²
(Cover: 64 - 128g/m²)
Book tray stacking type
Fixed
Quantity of paper to be stapled 10 sets (6 - 10 pages)
20 sets (1 - 5 pages)(80g/m²)
B. AR-PN1
Type
No. of punch holes
Size of paper
applicable for punching
Punch unit
AR-PN1A AR-PN1B AR-PN1C AR-PN1D
2 holes
2 / 3holes
4 holes
4 holes
Max. A3, Min. B5R
4. Consumable parts
Name
Content
Life
Staple cartridge Staple cartridge x 3 5000 x 3
AR-F14/PN1 INTRODUCTION 1-1
Product
name
AR-SC2
Remark