1
Download Rabbit RCM3000 Specifications
Transcript
1.2.1 Physical & Electrical Specifications Table 2 lists the basic specifications for the RCM3000. Table 2. RCM3000 Specifications Specification Data Power Supply 3.15 – 3.45 V DC (145 mA at 29.5 MHz clock speed) Size 1.85" x 2.65"” x 0.86" (47 mm × 67 mm × 22 mm) Environmental –40°C to 70°C, 5–95% humidity, noncondensing NOTE: For complete product specifications, see Appendix A in the RabbitCore RCM3000 User’s Manual. The RCM3000 modules have two 34-pin headers to which cables can be connected, or which can be plugged into matching sockets on a production device. The pinouts for these connectors are shown in Figure 1 below. J1 GND PA7 PA5 PA3 PA1 PF3 PF1 PC0 PC2 PC4 PC6 PG0 PG2 PD4 PD2 PD6 n.c. J2 STATUS PA6 PA4 PA2 PA0 PF2 PF0 PC1 PC3 PC5 PC7 PG1 PG3 PD5 PD3 PD7 n.c. /RES PB2 PB4 PB6 PF4 PF6 PE7 PE5 PE3 PE0 PG6 PG4 /IORD SMOD1 VRAM +3.3V n.c. PB0 PB3 PB5 PB7 PF5 PF7 PE6 PE4 PE1 PG7 PG5 /IOWR SMOD0 /RESET_IN VBAT_EXT GND GND n.c. = not connected Note: These pinouts are as seen on the Bottom Side of the module. Figure 1. RCM3000 Connector Pinout Getting Started 3
