Download Brocade Communications Systems 425 Technical data

auth
secret string
--show
Specifies the secret string. The maximum length of the secret is 63 bytes. The
default secret for each interface is its pwwn without the colons; for example,
0102030405060708.
Displays the authentication settings and current status.
port_id
Specifies the ID of the port for which you want to display information.
--stats
Displays the authentication statistics.
port_id
Specifies the ID of the port for which you want to display information.
--statsclr
Clears the authentication statistics.
port_id
Example
B
Specifies the ID of the port for which you want to clear statistical information.
Here is an example of the output when authentication is successful:
bcu auth --show 1/0
port
Port Status
Auth
Hash Type
1/0
Linkdown
success
MD5
Group Type
DH-NULL
Here is an example of the output when authentication failed:
bcu auth --show 1/0
port
Port Status
Auth
Hash Type
1/0
Linkdown
failed
MD5
Group Type
DH-NULL
Here is an example of the output when authentication is not enabled:
bcu auth --show 1/0
port
Port Status
Auth
1/0
Linkup
no_auth
Hash Type
Group Type
bcu auth --policy 2/1 on
Authentication turned on
bcu auth --policy 2/1 off
Authentication turned off
bcu auth --secret 5/0 “mypasswd”
Authentication secret set
bcu auth --stats 4/1
successes: 1
failures: 0
auth_rx_stats:
auth_rjts: 0
auth_negs: 0
auth_dones: 0
dhchap_challenges: 2
dhchap_replies: 0
dhchap_successes: 1
Brocade Adapters Administrator’s Guide
53-1001583-01
129