Download Caple Ri551 Service manual

HP 16S1SA/16A - Service
3. Starting from the top, begin pulling all filler panel(s) and card(s) out half way. See figure 6-19.
All multi-card modules will be cabled or screwed together. Care should be taken
to pull these cards out together. Refer to the appropriate seNice manual for any
specific precautions during installation.
¢J1
<:
NEXT LOWEST
12
165301EX13
Figure 6-19. Endplate Overhang
4. Pull timing module to be serviced completely out.
5. Lay card(s) on antistatic mat with probe assemblies flat and pointing out to rear of card. See figure
6-20.
Figure 6-20. Cable Position
6-32